Municipal Corporation Tender

others;110 mm dia - Single 'Y' - UPVC/SWR Pipe fittings (DATA - SSR 2023-24, Item code:TBSP-H.II-36, Pg no: 292, Item no: 572)

others;110 mm dia - Single Tee - UPVC/SWR Pipe fittings (DATA - SSR 2023-24, Item code:TBSP-H.II-24, Pg no: 292, Item no: 560)

others;110 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings (DATA - SSR 2023-24, Item code: TBSP-H.II-18 , Pg no: 292, Item no: 554)

others;110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings (DATA - SSR 2023-24, Item code: TBSP-H.II-12 , Item no: 548)

others;Supply of 32 mm civic end cap where in the compound should confirm to IS 15778 CPVC pipe IS 15225 CPVC compound with high range of pressure and high range of thickness in SDR 11 and SDR 13.5 (DATA - SSR 2023-24, Item code: TBSP-J.III-202, Item no: 906)

others;Supply of 32 mm PPR Union conforming to DIN Standards 8077/8092 (DATA - SSR 2023-24, Item code: TBSP-J.III-183, Item no: 887)

others;Supply of 32mm PPR Elbow conforming to DIN Standards 8077/8085 (DATA - SSR 2023-24, Item code: TBSP-J.III-58, Pg no: 302, Item no: 758)

others;Supply of 32mm PPR Tee conforming to DIN Standards 8077/8086 (DATA - SSR 2023-24, Item code: TBSP-J.III-67, Pg no: 302, Item no: 771)

others;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part 4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock (DATA - SSR 2023-24, Item code: TBSP-E.VI-06 , Pg no: 277, Item no: 284

others;Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum. excluding Cost of Seigniorage Charges

others;Flush door shutters, solid bond wood block board type with teak ply on both faces.: 30 mm thick conforming to IS:2202 TBSC-L.II-02

others;S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 TBSP-J.III-03

others;Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with aluminumanodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED /Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / GoldmedalLED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.

others;Supplying Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 300 x 300mm and thickness 25 mm of any shades. TBSC-C.VIII-04

others;Supply and fixing of Cement Bonded Prelaminated Particle Board aluminium glazed partitions using 10MM Cement Bonded Prelaminated Particle Board and 5.00 mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution. TBSC-K.IV-13

others;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1- mesh shutter) duly manufactured using UPVC reinforcedprofiles(Compositionofprofileshall consists a minimum of 5.5 PHR of TiO2 andnot morethan 12PHRofCaCo3 for every 100parts ofPVCresin) of (94mmx45mm)/(80mmx52 mm) x 2.20 mm for outer frames, (58 mm x 39mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced withhot dip galvanized up to 50 microns of minimum thicknessof1.0/1.2mmprefabricated&welded through fusion welding. The window sashshall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42mmx25mm)/(52mmx21.5mm)x2.0mm fittedwithVinylCoatedFibremesh-onrollers/ pulleydulyfixedwithGreycolourTPVGasketfor sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single pointlockingwithTouchLockandthesystemis tobeinstalledatthesiteusinganchorfasteners, siliconrubbersealant,easyglazing/deglazingat site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item ofwork. TBSC-M.II-11

others;Supply, Transportation of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells /Orient / Haloni

others;Supply of 16A (2 in one) Mini Modular Switch & Socket combined with Cover Frame Makes : GM / Anchor / Million / Vimal / Gold Medal / CPL / Great White. ELEC-1.8.1.j

others;Supply of 36W Pin type CFL Lamp. Makes : Phillips / Crompton / Bajaj / Surya / Havells / HPL / Halonix. ELEC-3.8.7.f

others;Supply of CFL holder of makes Phillips / Crompton / Bajaj / Surya ELEC-3.7.9

others;Supply of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable. Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). ELEC-1.5.1.b

others;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

others;Supply of Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13 711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finishin all shades anddesigns TBSC-C.II-03

others;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

others;Plastering 20mm thick in two coats with base coat of 16mm thick in C.M. (1:6) and topcoat of 4mm thick in C.M (1:4) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand,. Water, etc., to site, cost of seigniorage charges on all materials, all taxes, all operational, incidental charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work for uneven surface of walls (outer walls)

others;Plastering12mm thick in two coats with base coat of 8mm thick in C.M. (1:4) and topcoat of 4mm thick in C.M (1:2) with sponge finishing including cost & conveyance of all materials like cement, Sand,. Water, etc., to site, cost of seigniorage charges on all materials, all taxes, all operational, incidental charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work for uneven surface of walls