Municipal Corporation Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 1,63,927Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
537931Bid Award Id
ViewTender No
NIT No. 09/14/SE/KPZ/GHMC/2024-25, Dt:13.08.2024Tender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://https://www.ghmc.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.II-67 Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings
12
269
3228
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.II-65 P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe fittings
12
281
3372
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.I-10 110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe - 4 Kg/sq.cm
12
407
4884
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.II-36 110 mm dia - Single 'Y' - UPVC/SWR Pipe fittings
12
162
1944
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.II-24 110 mm dia - Single Tee - UPVC/SWR Pipe fittings
12
129
1548
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.II-15 110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings
12
128
1536
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.II-12 110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings
12
100
1200
... More
Beautification and Development of balance Multipurpose function hall;TBSP-H.I-03 110 mm dia 3 M Single Socket PVC/SWR pipe - 4Kg/sq.cm
12
569
6828
... More
Beautification and Development of balance Multipurpose function hall;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes.6.0 Kgs/cm2 110mm dia
50
256
12800
... More
Beautification and Development of balance Multipurpose function hall;TBSP-J.III-213 Supply of 25x20 mm civic reducing tee where in the compound should confirm to IS 15778 CPVC pipe IS 15225 CPVC compound with high range of pressure and high range of thickness in SDR 11 and SDR 13.5
12
280
3360
... More
Beautification and Development of balance Multipurpose function hall;TBSP-J.III-212 Supply of 32mm civic elbow where in the compound should confirm to IS 15778 CPVC pipe IS 15225CPVC compound with high range of pressure and high range of thickness in SDR 11 and SDR 13.5
12
44
528
... More
Beautification and Development of balance Multipurpose function hall;TBSP-J.III-02 Supply of premium make CPVC Pipes of 22.20mm OD Pipe- SDR 13.5
80
175
14000
... More
Beautification and Development of balance Multipurpose function hall;TBSP-J.III-03 Supply of premium make CPVC Pipes of 28.60mm OD Pipe- SDR 13.5
80
235
18800
... More
Beautification and Development of balance Multipurpose function hall;TBSP-F.I-03 S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS8931
13
938
12194
... More
Beautification and Development of balance Multipurpose function hall;TBSP-E.VI-07 Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Double C.P. Pillar cock
4
2045
8180
... More
Beautification and Development of balance Multipurpose function hall;TBSP-E.VII-02 Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 410 x 265 x 305mm
4
3483
13932
... More
Beautification and Development of balance Multipurpose function hall;TBSP-E.II-04 Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' ' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour
9
11993
107937
... More
Beautification and Development of balance Multipurpose function hall;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, including cost of all material like HYSD bars, binding works, where they are not welded
1527.48
80
122244
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE
15.27
20618
314946
... More
Beautification and Development of balance Multipurpose function hall;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded. Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT
1296.67
80
103773
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE walls
6.55
16570
108617
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE water tank
22.5
2264
50957
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE water tank Slab beams
1.31
16926
22190
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE C8/F7,C9/F5, for water tank
2.35
20618
48387
... More
Beautification and Development of balance Multipurpose function hall;plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat inn CM (1:3), 4mm thickwith sponze finishing including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum.
43.2
630
27224
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work
43.2
32
1418
... More
Beautification and Development of balance Multipurpose function hall;plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat inn CM (1:3), 4mm thickwith sponze finishing including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum.
43.2
630
27224
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work
43.2
29
1285
... More
Beautification and Development of balance Multipurpose function hall;Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum
4.14
9067
37540
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work
18
328
5909
... More
Beautification and Development of balance Multipurpose function hall;Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum
4.97
9067
45047
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work.
21.6
255
5511
... More
Beautification and Development of balance Multipurpose function hall;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded. Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT
514
80
41136
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE Lift over head room Slab
5.76
2312
13320
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE Lift over head room Slab beams
0.66
17331
11481
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE LIFT OVER HEAD ROOM
0.95
21103
20022
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE LIFT SLAB
5.76
2264
13045
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE LIFT SLAB BEAMS
0.66
16926
11212
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. M25 Design MIx using WEIGH BATCH at SITE LIFT ROOM FOR SECOND FLOOR
1.14
20618
23474
... More
Beautification and Development of balance Multipurpose function hall;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded. Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT
1231.2
80
98533
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing OF R.C.C grade M 30 (Design Mix) using 30 mm Graded Metal (MORTH) using cemet content 407kg/cum including Centering and scaffolding charges including labour charges for errection and dismantling of shuttering and scaffolding for CC /RCC side walls of Culverts / Storm water drains /Nalas (where sewage/Sullage flows through them and not for normal / routine nature of drain works) charges pg no:450 FOR TOP SLAB
2.48
8511
21142
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing OF R.C.C grade M 30 (Design Mix) using 30 mm Graded Metal (MORTH) using cemet content 407kg/cum including Centering and scaffolding charges including labour charges for errection and dismantling of shuttering and scaffolding for CC /RCC side walls of Culverts / Storm water drains /Nalas (where sewage/Sullage flows through them and not for normal / routine nature of drain works) charges pg no:450 SIDE WALLS
7.13
8039
57307
... More
Beautification and Development of balance Multipurpose function hall;Supply and placing OF R.C.C grade M 30 (Design Mix) using 30 mm Graded Metal (MORTH) using cemet content 407kg/cum including Centering and scaffolding charges including labour charges for errection and dismantling of shuttering and scaffolding for CC /RCC side walls of Culverts / Storm water drains /Nalas (where sewage/Sullage flows through them and not for normal / routine nature of drain works) charges pg no:450 BOTTOM SLAB
2.7
6177
16680
... More
Beautification and Development of balance Multipurpose function hall;Plain Cement Concrete (1:5:10) using 40mm metal with hand mixing up to plinth level using 162kgs of cement including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Cost of Seigniorage Charges on all materials, all taxes and Labour Charges for mixing , laying Concrete tamping, lifting, curing, finishing but excluding Centering Shuttering Charges and cost of steel and fabrication charges Etc., Complete for finished item of Work.1 Cum
1.84
5185
9529
... More
Beautification and Development of balance Multipurpose function hall;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Ordinary Soil-Manual Means-Upto 3 m depth
171.5
332
57094
... More
Beautification and Development of balance Multipurpose function hall;Roofing withPre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with G.I ?J? bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including all charges, etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials
48
945
45406
... More
Beautification and Development of balance Multipurpose function hall;Supply and fixing of MS grills /bars including labour and conveyance cost complete etc.,Mild steel,structural steel i.e., angles chanels and sections including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, cost of fixing in position Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position
200
120
24086
... More
Beautification and Development of balance Multipurpose function hall;Windows TBSC-M.II-15 Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles of 91 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30 mm 15 mm x 1.5 mm with hot dip galvanized upto 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work
5.4
8118
43837
... More
Beautification and Development of balance Multipurpose function hall;painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powderd materials, includingcost and conveyence of all materials to work site and all operational , incidental charges etc complete for finished item of work
54
254
13761
... More
Beautification and Development of balance Multipurpose function hall;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding
54
516
27867
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work for painting
54
328
17728
... More
Beautification and Development of balance Multipurpose function hall;plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat inn CM (1:4), 4mm thick with Dubara sponze finishing including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum.
108
650
70245
... More
Beautification and Development of balance Multipurpose function hall;Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum
12.42
9067
112619
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work
54
328
17728
... More
Beautification and Development of balance Multipurpose function hall;Windows TBSC-M.II-15 Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles of 91 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30 mm 15 mm x 1.5 mm with hot dip galvanized upto 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work
1.08
8118
8767
... More
Beautification and Development of balance Multipurpose function hall;TBSC-T.I-25 Labour charges for fixing Flush door shutters of any thickness to the existing door frame including fixing the fixtures to the door shutter excluding cost of shutter
2.19
611
1336
... More
Beautification and Development of balance Multipurpose function hall;TBSC-R.I-34 Door frames : 51*51 Stepped U section made from 1.25 mmthick C.R.section with a 32 mm rebate for 30 mm flush door and door shutters with 30 mm thick block board / Flush doors with boiling water proof plywood complete with necessary hard ware
2.19
4617
10097
... More
Beautification and Development of balance Multipurpose function hall;TBSC-L.II-12 Flush door shutters, solid bond wood block boardtype with teak vencer on one face and commercial ply on another face (lipping) : 40 mm thick conforming to IS: 2202
2.19
2956
6465
... More
Beautification and Development of balance Multipurpose function hall;painting to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powderd materials, including cost and conveyence of all materials to work site and all operational, incidental, labour charges etc. complete for finished item works as per SS912
120
284
34139
... More
Beautification and Development of balance Multipurpose function hall;Roofing withPre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with G.I ?J? bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including all charges, etc., complete, excluding the cost of purlins, rafters, trusses & cost of conveyance of all materials
24
945
22703
... More
Beautification and Development of balance Multipurpose function hall;Supply and fixing of MS grills /bars including labour and conveyance cost complete etc.,Mild steel,structural steel i.e., angles chanels and sections including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, cost of fixing in position Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position
100
120
12043
... More
Beautification and Development of balance Multipurpose function hall;Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.
60
650
39025
... More
Beautification and Development of balance Multipurpose function hall;Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum
6.9
9067
62566
... More
Beautification and Development of balance Multipurpose function hall;Damp proof course 50mm thick with 1:2:4 cement concrete Nominal mix, using 12mm hard broken stone aggregate including cost of all materials, seigniorage charges, excluding conveyance charges of materials including the cost of machinery, labour charges, mixing, placing in position, leveling, vibrating, curing etc. complete for finished item of work. (Using concrete mixer)
4.5
351
1581
... More
Beautification and Development of balance Multipurpose function hall;Raised Flush Pointing with CM (1:3) to RR Masonry including Labour charges like cement fire aggregete (sand) water all cost and conveyance etc complete for finished item of work
24
147
3542
... More
Beautification and Development of balance Multipurpose function hall;Randum Rubble Masonry in Cement Mortor 1:6 Prop using hard granite (CR stone), Rough stone, Bond stones including Cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones,Rough stone, bond stone etc.,including Cost of Seigniorage Charges on all Materials, all taxes including Labour charges for cutting Stones to required size and shape at mixing of Cement Mortor Construction, Scaffolding, lift and curing Charges etc.,Complete for Finished item of WorkPer 1 Cum
10.8
5953
64293
... More
Beautification and Development of balance Multipurpose function hall;Plain Cement concrete (1:5:10) using 40 mm metal with hand mixing upto Plinth level using 162kgs of cement including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Cost of Seigniorage Charges on all materials, all taxes and Labour Charges for mixing , laying Concrete tamping, lifting, curing, finishing but excluding Centering Shuttering Charges and cost of steel and fabrication charges Etc., Complete for finished item of Work.1 Cum
1.12
5453
6135
... More
Beautification and Development of balance Multipurpose function hall;Collection and supply and spreading of gravel including watering and rolling with Hand roller irresppective of thickness to achive the desired dencity as per Technical specification and excluding Seigniorage charges
18
506
9117
... More
Beautification and Development of balance Multipurpose function hall;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Ordinary Soil-Manual Means-Upto 3 m depth
11.25
332
3745
... More
Beautification and Development of balance Multipurpose function hall;Providing and Laying of Interlocking Concrete Block Pavements using CC M40 having thickness 80 mm as per drawings and Technical Specification Clause 1504 MORD.
1074
717
770090
... More
Beautification and Development of balance Multipurpose function hall;Flling with crusher stone dust finer than 3 mm with not more than 10% passing 0.075 sieve including supply and delivery of crusher stone dust finer than 3 mm for filling including cost of crusher stone dust and convenance charges ,filling charges watering tamping and rammiing and all labour charges and operational charges complete as directed by the departmental officer.
80.55
1259
101475
... More
Beautification and Development of balance Multipurpose function hall;Plain Cement concrete (1:5:10) using 40 mm metal with hand mixing upto Plinth level using 162kgs of cement including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Cost of Seigniorage Charges on all materials, all taxes and Labour Charges for mixing , laying Concrete tamping, lifting, curing, finishing but excluding Centering Shuttering Charges and cost of steel and fabrication charges Etc., Complete for finished item of Work.1 Cum
107.4
5453
585716
... More
Beautification and Development of balance Multipurpose function hall;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Ordinary Soil-Manual Means-Upto 3 m depth
161.1
332
53632
... More
Beautification and Development of balance Multipurpose function hall;Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for External walls
343.51
516
177273
... More
Beautification and Development of balance Multipurpose function hall;Painting with Ready mixed oil paint (all colours) Two Coats - Old Wood Work & New Iron Work:
110.88
177
19697
... More
Beautification and Development of balance Multipurpose function hall;Supply and fixing of MS grills /bars including labour and conveyance cost complete etc.,Mild steel,structural steel i.e., angles chanels and sections including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, cost of fixing in position Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position
5215
120
628042
... More
Beautification and Development of balance Multipurpose function hall;Providing Plain cement concrete (1:2:4) nominal mix using hand mixer as approved by the department using Graded hard granite machine crushed metal including cost and conveyance of all materials to site, machine mixing of concrete, all lifts, leads, delifts, centering, laying in position, vibrating, compacting, curing, removal of centering, all labour charges, tools and plants, and all other incidental and operational charges etc., complete as per specifications, drawings and as directed by the Engineer - in - Charge.
4.84
7356
35583
... More
Beautification and Development of balance Multipurpose function hall;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded. Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT
624.24
80
49958
... More
Beautification and Development of balance Multipurpose function hall;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and encluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but inccluding centering, shuttering.Unsupported Height up to 3.66 M Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., For gate pillar coloumns
5.27
16312
85976
... More
Beautification and Development of balance Multipurpose function hall;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and encluding Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but inccluding centering, shuttering.Unsupported Height up to 3.66 M Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., For gate pillar footings
0.97
11779
11449
... More
Beautification and Development of balance Multipurpose function hall;Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing.
593.77
650
386202
... More
Beautification and Development of balance Multipurpose function hall;Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum
54.29
9067
492244
... More
Beautification and Development of balance Multipurpose function hall;Damp proof course 50mm thick with 1:2:4 cement concrete Nominal mix, using 12mm hard broken stone aggregate including cost of all materials, seigniorage charges, excluding conveyance charges of materials including the cost of machinery, labour charges, mixing, placing in position, leveling, vibrating, curing etc. complete for finished item of work. (Using concrete mixer)
85.5
351
30045
... More
Beautification and Development of balance Multipurpose function hall;Raised Flush Pointing with CM (1:3) to RR Masonry including Labour charges like cement fire aggregete (sand) water all cost and conveyance etc complete for finished item of work
456
147
67306
... More
Beautification and Development of balance Multipurpose function hall;Randum Rubble Masonry in Cement Mortor 1:6 Prop using hard granite (CR stone), Rough stone, Bond stones including Cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones,Rough stone, bond stone etc.,including Cost of Seigniorage Charges on all Materials, all taxes including Labour charges for cutting Stones to required size and shape at mixing of Cement Mortor Construction, Scaffolding, lift and curing Charges etc.,Complete for Finished item of WorkPer 1 Cum
205.2
5953
1221574
... More
Beautification and Development of balance Multipurpose function hall;Plain Cement concrete (1:5:10) using 40 mm metal with hand mixing upto Plinth level using 162kgs of cement including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Cost of Seigniorage Charges on all materials, all taxes and Labour Charges for mixing , laying Concrete tamping, lifting, curing, finishing but excluding Centering Shuttering Charges and cost of steel and fabrication charges Etc., Complete for finished item of Work.1 Cum
21.38
5453
116570
... More
Beautification and Development of balance Multipurpose function hall;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Ordinary Soil-Manual Means-Upto 3 m depth
171.36
332
57049
... More
Beautification and Development of balance Multipurpose function hall;TBSC-K.l-28 supply and fixing false ceiling using 8 mm thick cement Bonded particle boards conforming to 14276 with galvanized and pre painted steel T section of size 24mm x 38mm x 0.3 mm for main T duty pre punched to accept cross T section of size 24mm x 30mm x 0.3 mm duly punched at both ends for insertion into main T, The grid size will be 610rnm 610mm. The frame work (grid) is suspended to the roof by using flat of or 14- gauge 6.1 wire with fixers to the roof and frame work the cost is inclusive of necessary hardware, labour, one coat of primer (Both side smooth finish on visible side. 1 Sqm 1,299.00
787.54
1347
1060814
... More
Beautification and Development of balance Multipurpose function hall;TBSC-T.I-20 Labour charges for Fabrication of stainless-steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish
369.92
202
74724
... More
Beautification and Development of balance Multipurpose function hall;TBSC-E.III-01 Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade
369.92
434
160545
... More
Beautification and Development of balance Multipurpose function hall;Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
166.25
1074
178599
... More
Beautification and Development of balance Multipurpose function hall;Flooring with granite stone tiles 8 mm thick (mirror polished of all shades) set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but complete for finished item of work, but including the cost of conveyance of all materials,stacking,loading unloading excluding taxes.
190.75
2125
405452
... More
Beautification and Development of balance Multipurpose function hall;Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials
18
1250
22512
... More
Beautification and Development of balance Multipurpose function hall;Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
955.75
1228
1174177
... More
Beautification and Development of balance Multipurpose function hall;Providing skirting to internal walls to 15 cm height/risers of steps with 25mm thick polished Shahabad stone length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Shahabad stone, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials
18
1080
19454
... More
Beautification and Development of balance Multipurpose function hall;Flooring with 40mm thick Rough Cuddapah/Shabad stones, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, but excluding the cost of conveyance of all materials.
955.75
810
775085
... More
Beautification and Development of balance Multipurpose function hall;painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powderd materials, includingcost and conveyence of all materials to work site and all operational , incidental charges etc complete for finished item of work
979.2
254
249530
... More
Beautification and Development of balance Multipurpose function hall;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding
979.2
516
505326
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work FIRST FLOOR
540
29
16065
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work ground floor
439.2
21
9320
... More
Beautification and Development of balance Multipurpose function hall;painting to new walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powderd materials, including cost and conveyence of all materials to work site and all operational, incidental, labour charges etc. complete for finished item works as per SS912 for internal walls
1934.95
284
550474
... More
Beautification and Development of balance Multipurpose function hall;Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls
979.2
284
278886
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work for painting first floor ceiling
802.83
43
34746
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work for painting Bride and Groom Rooms
990
21
21008
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work for painting ceiling
955.75
32
31215
... More
Beautification and Development of balance Multipurpose function hall;TBSC-E.I-02 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm Diameter steel pulleys, the top,bottom and side vertical frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel primer etc., complete for finished item of work as per special Spec 1105
11.66
4017
46854
... More
Beautification and Development of balance Multipurpose function hall;TBSC-E.I-01 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec: 1108
12.15
4592
55793
... More
Beautification and Development of balance Multipurpose function hall;Supply and fixing of MS grills /bars including labour and conveyance cost complete etc.,Mild steel,structural steel i.e., angles chanels and sections including Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, cost of fixing in position Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position
945
120
113806
... More
Beautification and Development of balance Multipurpose function hall;Windows TBSC-M.II-15 Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows with mesh duly manufactured using UPVC reinforced profiles of 91 mm x 49 mm x 2.20 mm for outer frames, 62 mm x 41 mm x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with 30 mm 15 mm x 1.5 mm with hot dip galvanized upto 50 microns of minimum thickness of 1.0/1.2 mm and the shutter of fly screen with fibre mesh shall be made of size 21mm x 58mm extruded uPVC window profile section of white colour having outer wall thickness of 2.2mm (± 0.3mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section duly mitred cut and thermal welded at all corners and prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work
81
8118
657558
... More
Beautification and Development of balance Multipurpose function hall;VENTILATORS TBSC-M.III-07 Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
4.32
6407
27678
... More
Beautification and Development of balance Multipurpose function hall;TBSC-T.I-09 Labour charges for making, fabricating any aluminium door/ window/ glazing including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, fixing in position with necessary screws excluding cost of materials, accessories, fittings excluding cost of anodization
20.73
750
15549
... More
Beautification and Development of balance Multipurpose function hall;TBSC-L.III-01 Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top &bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture M.S.frame shall be covered with 5mm thick heat moulded PVC ?C? channel of size 30 x 50mm forming stiles,and 5mm thick, 75mm wide PVC sheets for top rail, lockrail& bottom rail on either side, and 0mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joinedtogether with solvent cement adhesive etc. Anadditional 5mm thick PVC strip of 20mm width isto be stuck on the interior side of the?C? Channelusing PVC solvent adhesive. Complete as perdirection of Engineer in charge, manufacturer?s specification & drawing for finished item of work .
20.73
2292
47517
... More
Beautification and Development of balance Multipurpose function hall;TBSC-T.I-25 Labour charges for fixing Flush door shutters of any thickness to the existing door frame including fixing the fixtures to the door shutter excluding cost of shutter
28.9
611
17657
... More
Beautification and Development of balance Multipurpose function hall;TBSC-R.I-34 Door frames : 51*51 Stepped U section made from 1.25 mmthickC.R.section with a 32 mm rebate for 30 mm flush door and door shutters with 30 mm thick block board / Flush doors with boiling water proof plywood complete with necessary hard ware
28.9
4617
133427
... More
Beautification and Development of balance Multipurpose function hall;TBSC-L.II-12 Flush door shutters, solid bond wood block boardtype with teak vencer on one face and commercial ply on another face (lipping) : 40 mm thick conforming to IS: 2202
28.9
2956
85425
... More
Beautification and Development of balance Multipurpose function hall;plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat inn CM (1:4), 4mm thick with Dubara sponze finishing including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum.
979.2
650
636891
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work FIRST FLOOR
540
29
16065
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work GROUND FLOOR
439.2
21
9320
... More
Beautification and Development of balance Multipurpose function hall;plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat inn CM (1:3), 4mm thickwith sponze finishing including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum.
1873.47
630
1180642
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work FISRT FLOOR CEILING
802.83
43
34746
... More
Beautification and Development of balance Multipurpose function hall;Providing traditional centering, shuttering and scaffolding using Cashewrina balli props and bracings supporting wooden brackets, wooden wall plates, wooden runners and steel plate form work as per the approved plan and other accessories as per the standard trade practice including hire charges for ballies, runners, wooden members and cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work
1062
21
22536
... More
Beautification and Development of balance Multipurpose function hall;Brick masonary in CM (1:6)with 2nd class Bricks traditional size 23*11*7 cms in Cement Mortor 1:6 Prop having minimum Crushing strength 40 Kgs Per Sqm including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, Etc., to site Cost of Seigniorage Charges on all Materials, all taxes including all labour charges like mixing Cement Mortor Scaffoding Charges lift charges , Curing charges Etc., Complete for finished item of work. , per 1 Cum.
0.43
9067
3917
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements