Municipal Corporation Tender

community hall;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete but excluding seigniorage charges for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)

community hall;PCC M20 grade nominal mix using 20mm size graded machine crushed hard Granite metal (course aggregate) from approved quarrys including cost and conveyance of all materials like cement, fine aggregate (sand) course aggregate, weater etc, to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, shuttering, curing etc., complete for finished item of work.

community hall;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

community hall;Brick masonary in CM (1:6) with 2nd class bricks traditional size 23x11x7 cm including c/c of all material and water to work at site cost of seigniorage charges and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc complete for finished item of work.

community hall;Construction of RR Masonary in C.M (1:6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

community hall;Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level. nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

community hall;Earth work excavation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work excluding seignerage charges and dewatering charges etc., complete for Foundation of Building.(APSS No. 308)

community hall;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

community hall;Supply and fixing of 4 way TPN distribution board with IP-43 protection (metal door) suitable for 3 phase ELCB/RCCB/DP Isolator as incomer and 10KA SP MCB's as out going including internal connection and labour charges for surface flush mounting etc., complete.

community hall;Supply and fixing of 6aA x 3/2 pin point type wall plug socket with 6A flush type switch control on common board including labour chrages and etc., complete.

community hall;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

community hall;Supply, Transportation and fixing of 4' of 1x 36/ 40 Watt Box type Tube Light luminaire powder coated CRCA sheet steel housing with electronic ballast suitable for 40 Watt tube including all labour charges for fixing fitting on varnished teak wood round blocks with flexible 3 core wire etc.,, complete with all connections including cost of 40W tube. Makes: Surya / Havells / HPL / Fortune Art

community hall;Supply of 1200 mm (48") sweep ISI mark ceiling Fan as per IS 374- 1979 and operating on 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories. Brown color Makes: Crompton / Bajaj Kassels 50 / Usha Atom

community hall;Labour charges for fixing Flush door shutters of any thickness to the existing door frame including fixing the fixtures to the door shutter excluding cost of shutter

community hall;Supply and delivery of Flush door shutters, solid bond wood block boardtype with commercial ply on both faces.: 40 mmthick conforming to IS:2202

community hall;Suppling and fixing stainless steel hand railing, balustrade etc using 304 or 202 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3' 0" high from ground level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizantal pipes placed below hand railing pipe as per the approved drawing includding cost and conveyance of all materials buffing charges polishing charges etc complete for finished item of work .

community hall;Providing impervious coat to exposed RCC roof slab surfcace with CM (1:3), 20mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorages charges, excluding conveyance charges of materials and includng all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing rouding off junctions of wall and slab etc complete for finished item of work.

community hall;White washing two coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

community hall;Painting with Synthetic Enamel paints - Two Coats including cost and conveyance and labour charges etc., complete as per standred specification. Old wood work & New iron work

community hall;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

community hall;Demolision of RCC slab including all charges etc complete as per specification

community hall;Demolision of tiles including all charges etc complete as per specification

community hall;Demolision of Brick masonary including stacking of serviceable materials and disposal of unserviceable materials within 100 meters lead