Municipal Corporation Tender

renovation;Supply of SWG Gully Traps (Round & Square) conforming to IS standards 150 x 100 mm (TBSP-A.II-56 SSR:24-25)

renovation;S/F Boxing of Nahany traps in RCC floors of Nahani Traps (TBSP-C.III-07 of SSR:24-25)

renovation;S & F 25 mm nominal size dia& 609.6 mm long aluminium anodized towel rod with brackets and aluminium screws (TBSP-J.I-25 of SSR:24-25)

renovation;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. (TBSP-J.I-35 of SSR:24-25)

renovation;Supply and fixing C.P. soap dish of approved make with screws etc., complete for finished item of work in all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge. (TBSP-F.VII-21 of SSR:24-25)

renovation;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931(TBSP-F.I-01, SSR:24-25)

renovation;Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm (TBSP-E.VII-03, SSR 24-25)

renovation;S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, connectors etc complete including excavating trenches up to 1.0 M deep laying pipes, fixing in position, testing, refilling excavated earth (TBSP-J.III-02, SSR:24-25)

renovation;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm -Single C.P. Pillar cock(TBSP-E.VI-01, sl.no.279, SSR 24-25)

renovation;Supplying & Fixing low down porcelain flushing tank with lid 10 Lit Capacity with internal components (TBSP-E.IV-01,sl.no:274, SSR 24-25)

renovation;Manufacture, Supply and Delivery of 75mm dia (4.0 Kgs/cm2) Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. (Public Health materials Sl. No. 17-1, SSR 24-25)

renovation;Manufacture, Supply and Delivery of 110mm dia (4.0 Kgs/cm2) Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. (Public Health materials Sl. No. 17-1, SSR 24-25)

renovation;Supplying & fixing approved make Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556- Part-3-2004 with "P" or "S" trap: 580 mm Long (TBSP-E.I-01, sl.no.258, SSR:24-25)

renovation;Supply of 300mm, 900 RPM Heavy duty exhaust fan with metallic blades. Makes : Crompton / Almonard / Havells Turbo Force SP. (SSR:24-25, ELEC-5.1.16, sl.no: 1078

renovation;Supply and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 50,000 burning hours with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. (ELEC-3.3.10, SSR 24-25)

renovation;Supply of 48" (1200mm) 5 star rated Sweep Ceiling Fan with all accessories etc., complete. Makes : Crompton HS Plus / Havells ES NEO / Orient Energy Star (ELEC-5.1.2, SSR 24-25)

renovation;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

renovation;Supply and fixing false ceiling using 8 mm thick Cement Bonded particle boards conforming to IS 14276 with galvanized and pre painted steel T section of size 24mm x 38mm x 0.3 mm for main T duty pre punched to accept cross T section of size 24mm x 30mm x 0.3 mm duly punched at both ends for insertion into main T. The grid size will be 610mm x 610mm. The frame work (grid) is suspended to the roof by using G.I flat of 0.60mm or 14-gauge G.I wire with necessary fixers to the roof and frame work the cost is inclusive of necessary hardware, labour, one coat of primer (Both side) and two coats of smooth finish on visible side. (TBSC-K.I-28 pg.no.448,SSR 2024-25)

renovation;Painting, with ready mixed oil paint (all colours) on New Wood Work of approved brand, Asian/Berger/Nerolac/ Saicoat/Indocem/PMCC/ ESSAR are equivalent, after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per specification.

renovation;Supplying and fixing iron grills of 25mm square bars in 50x50x6mm. M.S. Angle frames including cost and conveyance of all materials and fixing in position fabrication charges etc., complete as per specification.

renovation;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

renovation;Providing skirting to internal walls to 15cm height / rises of steps with 25mm thick polished shahabad stone length equal to flooring stones, set over base coat of CM 1:3 12mm thick with cement slurry of honey like cosistency spread at the rate of 3.30 kgs per sqm and jointed with white cment paste mixed with pigment of matcching shade of full depth, including cost of the material like shabad stone, cment, snad and water etc complete etc complete for finished item of work.

renovation;Flooring with vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 600 x 600 mm and thickness between 9-11 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs in cement mortor (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread #@ 3.3kgs per sqm and jointed neatlly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc complete etc complete for finished item of work,. (APSS No.701 & 707)

renovation;Providing dadooing to walls with glazed full body ceramic tiles of 300 X 450MM size and thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads and contractors profit complete for finished item of work. (Ground floor)

renovation;Moulded panel solid core flush doors using water-resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick Masonite or equivalent doors - 35 mm thick (TBSC-L.II-20) SSR 2024-25

renovation;Powder Coated Mild Steel Hallow single rebate door frames manufactured using cold rollformed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile size of 105 x 60 mm conforming to IS 4351 - 2003 including pre-treatment, Galvanized as per IS:277, zinc phosphating finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 60 ? 65 microns(Dry film thickness)Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush tothe frame with Hinges, Base Ties, Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc.forbothsingleanddoubleshutterdoors

renovation;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows open able shutters duly manufactured using UPVC reinforcedprofilesof(48mmx60mm)/(58mm x 60 mm) x 2.0 mm for outer frames, (64 mm x 60 mm)/(72 mm x 60mm) x 2.0 mm for mullion sections for two or more open able shutters and (78 mm x 60 mm)/(72 mm x 42 mm) x 2.0 mm for outward open able shutter frame or (70 mmx 60 mm)/ (72 mmx 42 mm) x 2.0 mm for inward open able shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm refabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/EPDM weathering seal resistant accessories for casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, locking system suitably concealed 1 No., per sash provided with raiser wedges forsmooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work

renovation;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete but excluding seigniorage charges for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904) (Ground Floor)

renovation;Supply and placing of the M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

renovation;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

renovation;Brick masonary in CM (1:6) with 2nd class bricks traditional size 23x11x7 cm including c/c of all material and water to work at site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc complete for finished item of work. (Ground Floor)

renovation;Dismantling of tiles including labour charges T&P and scaffolding wherever necessary sorting the dismantled material, disposal of unserviceable materials and stacking the materials with all lifts and initial lead