Municipal Corporation Tender

SWD Work;Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges and contractors profit. (Pg.No.32/617, SSR 2023-24)

SWD Work;Removal of wet silt and sludge from sullage drains,storm water drains with aid of baskets and vessels, etc with initial lift of 3 m and lead of 50 m. (Pg.No.508/617, Sl.No.40, SSR 2023-24)

SWD Work;Providing barricading arrangement with casurina ballies as per design duly excavating pits and its removal after the function is over including hire charges of the barricading materials as per the schedule given by the departmernt authorities complete for finished item of work. 2-TIER (2 Nos Horizontals- 6'-0" long -1 No Vertical- 4'-0" High)

SWD Work;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Ordinary Soil-Manual Means-Upto 3 m depth.

SWD Work;Cutting sheet rock including stocking of excavated material including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.

SWD Work;Dewatering pump 5hp (diesel) including cost and conveyance of all materials etc complete (Pg.No.49/617, SSR 2023-24)

SWD Work;Supply and filling with good HBG stone chips below 5.6mm size (exluding rock) in trenches sides of foundations and basement with intial lead inlayers not exceeding 15 cms thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges hire charges of T & P etc., complete for finished item of work

SWD Work;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, centering, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design (M10-220 Kgs) . including formwork @ 4.00 % of cost of concrete i.e. cost of material, labour and machinery.

SWD Work;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, centering, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. including formwork @ 3.5% of cost of concrete i.e. cost of material, labour and machinery. (For Bottom Slab) , Cement (@ 360 kg/Cum) . For Raft / Bottom Slab

SWD Work;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, centering, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. including formwork @ 3.5% of cost of concrete i.e. cost of material, labour and machinery, Cement (@ 360 kg/Cum) For Side walls

SWD Work;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, centering, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. including formwork @ 3.5% of cost of concrete i.e. cost of material, labour and machinery, Cement (@ 360 kg/Cum) For Top Slab

SWD Work;Supplying, fitting and placing HYSD Fe 500 Grade steel for RCC works complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, including cost of all materail like HYSD bars, binding wire, chairs, space bars and all labour charges for cutting, bending, placing position, shifting to site, tying etc.. complete where they are not welded.

SWD Work;Supply, Delivery and fixing of 750x750mm DI Jali with frame 130 kgs including cost and conveyance of all materials to site, labour charges complete for finished item of work as per standard specification

SWD Work;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other CManufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. (200 mm dia 4 Kg/ Cm2) (PgNo.562/617, SSR 23-24)

SWD Work;House service water supply pipe connections including cost and conveyance of all materials etc complete.

SWD Work;Junction Connection, for water supply pipe HDPE pipe including cost and conveyance of all etc., complete.

SWD Work;Carting of excavated earth with a lead of about 14 KMts, including cost and conveyance of all materials and all labour charges, contractor profit and over head charges etc., complete for finished item of work as directed.

SWD Work;Supply & Delivery of RCC frames and covers made of M40 Design Mix (dept store rate)including, loading, un-loading & stacking at site, including all taxes etc complete

SWD Work;Manufacture, Supply and Delivery of RCC NP3 Socket and spigot pipes confirming to BIS 458/2003 including cost and conveyance of all materials. For 600 mm dia (SSR item) (10km lead)

SWD Work;Lowering the RCC S/S for NP3 pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985. For 600 mm dia

SWD Work;Filling with useful available excavated earth (excluding rock) sand/gravel/ stone dust/ chips in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. But excluding cost and conveyance of material. (APSS NO. 309 & 310) Earth/ Sand/ gravel filling (ordinary soil)