Municipal Corporation Tender

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Plain Cement concrete M15 (1:2.5:5) using ,20,10 mm metal with concrete mixture(Vent portion)

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;PCC 1:2:4 using 20mm and 10mm Walls (For CC drain walls)

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Plain Cement Concrete (1:4:8) using 40mm metal concrete mixture All work up plinth level including cost, conveyance of all materials etc., complete for finished item of work

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Filling with Stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Supply and filling with gravel from approved quarry including cost and conveyance, watering, tamping including all labour charges

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Supply and Laying & Lowering of NP3 450 mm dia plain ended, Lowering the RCC plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with cement joints including curing,the cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including filling with water with a water lead upto 500 metres as per BIS No.783/85

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;RBR-CCPV-5- Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 53 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and technical specification clause 1501 MORD.

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH

Attending the road patches, Potholes and repairs of Drains at various places of Unikicherla;Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 MORD / MORTH By Mechanical Means