Municipal Corporation Tender

Table drain;Supply and placing of Ready Mix Concrete M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M30) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Table drain;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Table drain;Filling with Good Gravel soil, including supply and delivery of good gravel for filling, including cost of gravel, and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Table drain;Supply & Delivery of 600x600 mm DI Cover with frame - 90kgs

Table drain;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Table drain;PCC Grade M15 - Nominal mix 1:2.5:5 (Hand mixing) including cost and conveyance of all materials like cement, sand, water, Granite stone etc.all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

Table drain;Flush Pointing with CM (1:3) to Brick / CRS Masonry including cost and conveyance of all materials like cement, sand, water, Granite stone etc.all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

Table drain;Construction of RR Masonary in C.M (1.6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc.all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

Table drain;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable.I.S.I Mark (H.D.-20 with 560mm dia clear opening)

Table drain;Lowering of the 450mm RCC S/S pipes carefully into the trenches laying them true to alignment and Gradient, Joiting with Rubber Rings and Testing including filling with water witrh a water lead up 500m excluding cost for Rubber Rings as per BIS No.783/1985

Table drain;Manufacture Supply and Delivery of Rubber Rings to suit 450mm dia RCC Socket and Spigot NP3 pipes confirming to BIS 5382/1985 (Rate per each Rubber Ring) including transportation, central excise duty, sales tax but excluding vat

Table drain;Manufacture supply and delivery of 450MM dia RCC Socket and Spigot pipes (NP-3) confirming to BIS 458/2003 including transportation up to a lead of 10KMS, including loading, unloading and stacking to work site

Table drain;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH