Municipal Corporation Tender

wall;Supply and placing of the M-10 Design Mix concrete by ready mix, mixed in a batching and mixing plant as per appproved mix design, for sub base over a prepared sub grade, cement content not to be less than 220kg/ cum with crushed stone coarse aggregate of 25mm and 12.5mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to is:383, the coarse aggregate not exceeding 25mm, aggregate cement ratio not exceed 15:1, aggregate gradation after blending to be as per table 600-1 concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement,sand, coarse aggregate, water etc., to site all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete and vibrating, curing and finishing etc. complete including seigniorage charges and cost of steel and its fabrication chargse for finished item of work, as per technical sanction 601 MORTH etc., complete for finished item of work-for CC roads.

wall;Supply and placing of the M-30 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350kg/cum with crushed stone coarse aggregate of 25mm and 12.5mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1 aggregate gradation after blending to be as per table 600-1 concrete strength not to be less than 10Mpa at 7 days, including cost and conveyance of all materials like cement,sand, coarse aggregate, water etc., to site by transit mixer, pumping and laying concrete and vibrating(VDF flooring) curing and finishing etc., complete including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per technical specification 601 MORTH etc., complete for finished item of work for CC Roads.

wall;a) Bottom slab

wall;b) Side walls

wall;c) CC patch

wall;Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT)/Mildsteel (MS) steel bars (Fe415 / Fe500 grade as per IS1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, etc., complete for finished item of work in all floors.( APSS No.126)

wall;Filling with Excavated Earth (OrdinarySoil) including cost and conveyance of all labour charges etc.,complete for finished item of work.

wall;Carting away the existing debris to a lead of 15 kms including cost and conveyance of all materials etc complete as per specification.

wall;Engaging JCB for transporting materials including fuel and driver, all maintenance charges etc., complete

wall;Engaging labour for carrying RMC and other materials etc. Complete

wall;Engaging Tractor for transporting materials including fuel and driver, all maintenance charges etc., complete

wall;Bailing out of water using Dewatering Pump 5HP (Diesel), Complete during earth work excavation.

wall;Construction of RR Masonary in C.M (1:6) prop. (with department stones) Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

wall;S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

wall;Making holes in to GI pipe for fixing of chainling mesh including cost and conveyance of all metearials and labour charges etc. complete.

wall;Hot dipped Galvanized Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 2"x2" (50 mm x 50 mm) - 8 Gauge

wall;Supply and fixing of GI nut bolts, Patties and Hold Fasts including cost and conveyance of all metearials and labour charges etc. complete.