Municipal Corporation Tender

Balance work of First Floor of Community hall;Supply of 6-32A 10KA SP MCB ISI Mark of make Legrand / L & T / GE / Siemens / Schneider/ ABB.

Balance work of First Floor of Community hall;S&F of Electronic Regulator

Balance work of First Floor of Community hall;Supply of 48" (1200mm) Sweep Ceiling Fan without Regulator.of makes Crompton / Bajaj / Orient /Usha with 5 Star rating.

Balance work of First Floor of Community hall;Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessories. Makes : Surya / Havells / HPL / Fortune Art

Balance work of First Floor of Community hall;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete..and as per 2.1.4 of Sta revised data of BLD -TBSE

Balance work of First Floor of Community hall;Supply of 6A / 10A 1 Way Modular Switch of Crabtree / Feno Swtch / Toyoma / Fortune Art / Million / Gold Medal / Vimal / Anchor Roma / Schneider Opale.

Balance work of First Floor of Community hall;Supply of 36/0.3mm (2.5 Sqmm) FR / FRLS PVC insulated ISI Copper cable of makes Pawancab / Star / Milltec / Fine Cab / Payal / Sunlight / Bentec / Gemscab.

Balance work of First Floor of Community hall;Supply of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable. Makes : Finolex / RR kabel / Havells

Balance work of First Floor of Community hall;S&F of PVC 12 module boxes

Balance work of First Floor of Community hall;S&F of PVC 6 module boxes

Balance work of First Floor of Community hall;S/F of 25mm dia PVC Pips for electricalfittings

Balance work of First Floor of Community hall;Painting two coats with synthetic enamel paint of approved quality colour and grade-I over a primary coat to new welded surface including cost of primary coat and cost and coveyance of all matrials and laboue chages etc., complete.

Balance work of First Floor of Community hall;Supplying and fixing in position Bondwood flush doors of different sizes 35mm thick shutter with ISI mark, solid core of black bond type with medium teakwood veenering on side and commiricial facing on other side with hot pressed bonded with liquid phenol formaldehyde with rebite cutting single or double leaf as per drawings, using the medium teakwood frames of 1000x75mm size as directed, including cost and conveyance of all materials above changes and fixing up all furniture required and including locking arrangement is complying with standard specifications and as directed during execution etc., completed on finished item of work. BLD CSTN-11-16 with 6 Nos. Iron Hold fast, 3 Nos. MS-Powder Coated Butt hinges (IS:205)- 150 mm Long, 1 No. MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 250 mm Long, 1 No. MS-Powder Coated Aldrop (IS:2681) 300 mm long and 2 Nos. MS-Powder Coated Door Handles (IS:208) 150 mm Long 1000mm*2100mm

Balance work of First Floor of Community hall;S&F of Sal wood frame andFlush Shutters including cost and conveyance of all materials and lbour charges etc., complete.

Balance work of First Floor of Community hall;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item

Balance work of First Floor of Community hall;Providing and fixing 2 Track 2 glass shutter sliding Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 ?D? quality, Galvanized as per IS 277 with Zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58 mm. Primer coat with epoxy primer of 5?7 micron thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for external frame should be of 44 x 59mm, Section for glass shutter should be of 35 x 49 mm Section for euro roove should be 25 x24mm Aluminium/Plastic)and Lap Strip should be of 30 x 41mm(Aluminium/Plastic).shutter should be provided with a glass of 5mm Plain Float Glass. Corner bracket for External frame made of teel/Polypropylene, Corner Bracket for Internal frame made of teel/Polypropylene, Touch Lock, Rollers, wool pile for lap strip & euro groove, Bump Stop Base & Rubber for shutter stopper. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. The Frame Section should be cut to length and mitre joined with Corner brackets & Shutter Sections should be cut to length and mitre joined with Corner Bracket. Window Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.10mm square guard bars with 6? pitch (152.4mm) max to be fixed wall to wall and all taxes complete for finished item of work

Balance work of First Floor of Community hall;Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, etc., complete for for finished item of work. (APSS 1001,1003 & 1004) (CSSR) Internal Walls Ground floor

Balance work of First Floor of Community hall;Construction of brick work \ in CM (1:6) prop., using common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or traditional size , including cost & conveyance of all material and labour charges, centering & scafolding charges, and overhead charges & Contractors profit etc., complete as per APSS No.501 for Super structure and others but excluding VAT and seignorage chages in Ground Floor.

Balance work of First Floor of Community hall;Item Detailed Specification Description