Municipal Corporation Tender

civil;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design wall 400 mm

civil;Supply and fixing of RCC square perforated covers of size 0.7x0.7x0.125 and base frame of size 0.9x0.9x0.2 of VRCC M40 Design Mix including cost and conveyance etc., complete including loading ,unloading etc all charges, etc complete for finished item of work from Departmental store.

civil;Supplying, fitting and placing HYSD (Fe 500) bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.

civil;Providing concrete for reinforced concrete of Grade M 15 in open foundations using 20 mm and 10 mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days ,formwork with steel scafolding ,jacks props and steel platescomplete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. With Batching Plant, Transit Mixer and Concrete Pump Note: 1. The rate of RMC is worked out with manufactured sand (rock sand) and natural river sand in the ratio of 50:50.( 400 mm wall)

civil;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

civil;Filling with available excavated earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, hire charges of T & P etc., complete, for finished item of work. (APSS NO. 309 & 310) Caluse 305.3.9 MORD & 304 MORTH.

civil;Plain Cement concrete (1:5:10) using 40 mm metal with concrete mixer all material ;curing, labour, accidental charges etc complete . manufactured sand (rock sand) and natural river sand in the ratio of 50:50.

civil;Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S. 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including transportation but excluding taxes.. 1200mm dia NP3

civil;Lowering the RCC plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with Cement joints including curing, the cost of jointing materials i.e., Cement Mortar (1:1.5), emp yarn etc., and testing including filling with water with a water lead upto 500 metres as per BIS No.783/85 1200 Np3 pain ended pipe

civil;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Plain ended pipes conforming to B.I.S 458/2003, Ex-factory, (rate per meter of effective length) including transportation loading, Unloading & Stacking labour charges etc., complete. 1200mm dia NP3

civil;Carting of excavated earth / dismantled materials with a lead of 15km's including cost and conveyance of all materials and all labour charges ,loading,un loading etc., complete for finished item of work

civil;Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH

civil;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH

civil;Dismantling of existing cement concrete,including Labour ,machinary charges wherever necessary sorting the dismantled material, disposal of unserviceable materials and stacking the materials with all lifts and initial lead (By Mechanical means )

civil;Dismantling of flexible pavements and stacking serviceable and unserviceable materials separately as per Technical Specification Clause 202 MORD / MORTH including all labour , accidental and material charges complete