Municipal Corporation Tender

Storm Water Drain;Hot dipped Galvanized Iron Chain link mesh 8gauge - (4.0 mm) as per IS: 2721-1979: 2"x2"(50mm x 50 mm) - 8Gauge

Storm Water Drain;S& F 50 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour chargescomplete

Storm Water Drain;Randum Rubble Masonry in Cement Mortor 1:6 Prop using hard granite (CR stone), Rough stone, Bond stones including Cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones,Rough stone, bond stone etc.,including Cost of Seigniorage Charges on all Materials, all taxes including Labour charges for cutting Stones to required size and shape at mixing of Cement Mortor Construction, Scaffolding, lift and curing Charges etc., Complete for Finished item of Work. Per 1 Cum

Storm Water Drain;Supply and placing of the Ready Mix Concrete (RMC-M30) as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard Mix Design as per IS-10262:1982 with coarse aggregate of nominal size 20 mm and fine aggregate of Zone-II as per the Mix Design approved by the Department from standard suppliers including cost and conveyance, vertical pumping up to 5 floors / horizontal pumping up to 60.0 M for builsings / pavements etc., works for basic cost including levelling, grading, spreading, curing, centering, vibrating, compacting, finishing etc as required including material VAT, excise duty, pumping, transportation, approved admixture etc., complete Cement 350/KG

Storm Water Drain;Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH. Grading II

Storm Water Drain;Manufacture and Supply DI Covers 600X600 including cost and conveyance of all materials, labour and transportation charges etc

Storm Water Drain;Carting the excavated earth to a lead of 15KMS including labour charges for loading and unloading, transporataion charges etc,. Complete as per specification.

Storm Water Drain;Filling in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Storm Water Drain;Lowering RCC 600 mm dia S/S pipes carefully into the ready made trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water lead upto 500 meters excluding cost of rubber rings as per BIS No. 783/1985.

Storm Water Drain;Manufacture, Supply and Delivery of RCC 600mm dia Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) including transportation of 30 kms & excluding taxes.

Storm Water Drain;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.Reinforcement steel(HYSD/TMT) from steel manufacturers like TATA, SAIL, VSP, JSW, SHYAM STEEL, GOEL TMT, V-XEGA, JINDAL PANTHER, BALAGI SHAKTI, AF STAR, TMT/MS LIFE TMT, RADHA TMT AND SUGUNA TMT

Storm Water Drain;Supply and placing of Reinforced Cement Concrete (RCC) M30 byDesign Mix (DMC) Standard Mix Concrete using concrete mixer with minimum cement content of 405 Kg/Cum as per IS code 456-2000 and standard mix design as per IS:10262:2009 with Ordinary Portland Cement 43/53 grade and with 20mm size graded (20mm-60% & 10mm-40%) machine crushed hard broken stone of granite/trap/dolerite metal free from dust obtained by quarying, wedging, breaking, burning, splitting, machine crushing and blasting and fine aggregate (Manufactured sand (rock sand ) and natural sand in the ratio of 50:50)conforming IS:383-1970 (as per the Mix Design approved by the Engineer - in - Charge of the Department from standard suppliers) including cost and conveyance of all materials, labour charges, water charges, pumping, including form work and centering charges, laying concrete, vibrating, curing for 14 days, complete for finished item of work but excluding cost of steel and its fabrication charges and seigniorage charges as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 1800 MORTH. Note: 1) The quatities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used. Slab

Storm Water Drain;Supply and placing of Reinforced Cement Concrete (RCC) M30 byDesign Mix (DMC) Standard Mix Concrete using concrete mixer with minimum cement content of 405 Kg/Cum as per IS code 456-2000 and standard mix design as per IS:10262:2009 with Ordinary Portland Cement 43/53 grade and with 20mm size graded (20mm-60% & 10mm-40%) machine crushed hard broken stone of granite/trap/dolerite metal free from dust obtained by quarying, wedging, breaking, burning, splitting, machine crushing and blasting and fine aggregate (Manufactured sand (rock sand ) and natural sand in the ratio of 50:50)conforming IS:383-1970 (as per the Mix Design approved by the Engineer - in - Charge of the Department from standard suppliers) including cost and conveyance of all materials, labour charges, water charges, pumping, including form work and centering charges, laying concrete, vibrating, curing for 14 days, complete for finished item of work but excluding cost of steel and its fabrication charges and seigniorage charges as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 1800 MORTH. Note: 1) The quatities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used. Long walls, Short walls

Storm Water Drain;Supply and placing of Reinforced Cement Concrete (RCC) M30 byDesign Mix (DMC) Standard Mix Concrete using concrete mixer with minimum cement content of 405 Kg/Cum as per IS code 456-2000 and standard mix design as per IS:10262:2009 with Ordinary Portland Cement 43/53 grade and with 20mm size graded (20mm-60% & 10mm-40%) machine crushed hard broken stone of granite/trap/dolerite metal free from dust obtained by quarying, wedging, breaking, burning, splitting, machine crushing and blasting and fine aggregate (Manufactured sand (rock sand ) and natural sand in the ratio of 50:50)conforming IS:383-1970 (as per the Mix Design approved by the Engineer - in - Charge of the Department from standard suppliers) including cost and conveyance of all materials, labour charges, water charges, pumping, including form work and centering charges, laying concrete, vibrating, curing for 14 days, complete for finished item of work but excluding cost of steel and its fabrication charges and seigniorage charges as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 1800 MORTH. Note: 1) The quatities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used. Raft ( Catchpit)

Storm Water Drain;PCC Grade M15 - Nominal mix 1:2.5:5 (Hand mixing) including cost and conveyance of all materials etc complete

Storm Water Drain;Construction of granular sub-base by providing well graded material / Close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH. Grading II

Storm Water Drain;Cutting sheet rock including all charges etc complete

Storm Water Drain;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH by Mechanical means

Storm Water Drain;Cutting open BT. road surface including all charges etc., complete for pipeline work