Municipal Corporation Tender

Construction of Staff room, Reservoir and Pump room, Store room and drain;Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete (Makes of Copper wire : Finolex / RR Kabel / Havells /Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab/ Nakoda / Payal / Finecab / Gemini /Vimal / Suncab)

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply, Transportation of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 tar rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and Fixing of 25mm dia heavy grade, FRLS with IS:9537 part 3 rigid PVC pipe concealed in roof slab with all required accessories such as 25mm dia PVC Junction Deep Boxes, 25mm dia medium grade PVC bends including masonry work and labour charges etc., complete. Makes of PVC pipe: Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold/ Polycab / DEC / Beljin / Champion /Austro Makes of PVC junction box & PVC bends : Sudhakar / Finolex / Modi / VIP /Precision / DEC / Beljin / Champion /Austro

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and Fixing of ISI 25mm outer dia medium grade, FRLS with IS:9537 part 3 rigid PVC pipe concealed in Wall with all required accessories such as 20mm dia PVC Junction Deep Boxes, 20mm dia medium grade PVC bends including masonry work and labour charges etc., complete. Makes of PVC pipe: Sudhakar / Finolex / Modi / VIP /Precision / Universal / Million Plast / Gold/ Polycab / DEC / Beljin / Champion /Austro Makes of PVC junction box & PVC bends : Sudhakar / Finolex / Modi / VIP /Precision / DEC / Beljin / Champion /Austro

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and fixing 4 Way SPN DB with IP 20/30, Protection as per IS:13032 and suitable for 04Nos S.P out goings and for 1 No Incommer for single phase Double Pole (DP) Isolator of 40A as incomer and 6-32A SP MCB 10KA, C/D Curve as out going including internal connections and labour charges for surface / flush mounting etc., complete. Makes of SPN DB :Legrand / Schneider / Siemens /L&T / Hager / Cabtree Xpro/ ABB / C&S Makes of DP Isolator : Legrand-DX3 / Schneider-Acti9 /Siemens / L&T Exora / Cabtree. Makes of MCB: Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree. 40A DP Isolator 1 No for incomer, 6-32A SP MCBs - 8Nos for outgoing.Makes : Legrand / Schneider / Siemens / L&T / Cabtree Xpro.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant Low Smoke (FRLS) / HFFR P.V.C. insulated 1100 V Grade as per IS: 694 / 1990 specification for flexible copper cable (ISI MARK) in existing pipe with 6A 2 way mini modular switch with cover frame, 25 x 20 cms (10" x8") Hylam sheet 3mm thick,3 plate jumbo Ceiling rose, including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes of copper cable : Polycab / HPL / RPG / Kundancab / Nakoda / Anchor / GM / Million / Gold Medal / Power Flex / Fine Cab / Sun Cab / Fortune Arrt / Bonton / Gloster / Gemini / Uniflex / Sudhakar / Nandicab. Makes of Switch with cover : GM / Anchor / Million / Vimal / Gold Medal / CPL / Great White Makes of Jumbo Ceiling Rose:GM G Home / Gold Medal Olive / Million Zoom /Anchor Penta Cherry / Great white Omega / HPL / Vimal/ CPL.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Carting of excavated earth (including dismantled material of BT+RCC+CC or combined) with 15km lead including loading and unloading charges complete as per specification.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Filling with useful available excavated earth by Manual Means (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and excluding all taxes and duties complete for fnished item of work (APSS NO.309&310).

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supplying & fixing of 110 mm dia 3 m single Socket PVC/SWR pipe - 6 Kg/sq.cm - (Materials shall be procured from the list of approved Brands/ Manufacturers/ Suppliers) for complete finsihed item of work

Construction of Staff room, Reservoir and Pump room, Store room and drain;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS148462000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. PN 16, 100mm dia

Construction of Staff room, Reservoir and Pump room, Store room and drain;Providing impervious coat with CM (1:3) prop. using screened sand 20 mm thick mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding sales & other taxes on all materials and including operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

Construction of Staff room, Reservoir and Pump room, Store room and drain;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes, as applicable.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ liter for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work in all floors.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work in all floors.Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work in all floors. For internal walls

Construction of Staff room, Reservoir and Pump room, Store room and drain;Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for Internal walls.

Construction of Staff room, Reservoir and Pump room, Store room and drain;S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 11 including cost & conveyance of all materials, labour charges, etc., complete for finished item of work as directed by Engineer- in-charge.

Construction of Staff room, Reservoir and Pump room, Store room and drain;S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 11 including cost & conveyance of all materials, labour charges, etc., complete for finished item of work as directed by Engineer- in-charge.

Construction of Staff room, Reservoir and Pump room, Store room and drain;S&F premium make CPVC Pipes of 54.00mm OD Pipe - SDR 11 including cost & conveyance of all materials, labour charges, etc., complete for finished item of work as directed by Engineer- in-charge.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P.Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated PillarTap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI bracketsincluding wooden block: 550 x 400 mm - Double C.P. Pillar cock for wash hand basin for complete finished item of work

Construction of Staff room, Reservoir and Pump room, Store room and drain;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:10 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling with watering and tamping for complete finished item of work

Construction of Staff room, Reservoir and Pump room, Store room and drain;Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding with using MS Jack Prop Cup lock Pipe Scaffolds, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work .(SS 901,903 & 904)

Construction of Staff room, Reservoir and Pump room, Store room and drain;Providing and fixing 2 Track 2 glass shutter sliding Windows fabricated from roll formed sections made of Galvanized steel Colour Coated/ Powder Coated (Base Steel as per IS 513 ?D? quality, Galvanized as per IS 277 with Zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58 mm. Primer coat with epoxy primer of 5?7 micron thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for external frame should be of 44 x 59mm, Section for glass shutter should be of 35 x 49 mm Section for euro groove should be 25 x 24mm(Aluminium/Plastic)and Lap Strip should be of 30 x 41mm(Aluminium/Plastic).shutter should be provided with a glass of 5mm Plain Float Glass. Corner bracket for External frame made of Steel/Polypropylene, Corner Bracket for Internal frame made of steel/Polypropylene, Touch Lock, Rollers, wool pile for lap strip & euro groove, Bump Stop Base & Rubber for shutter stopper. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. The Frame Section should be cut to length and mitre joined with Corner brackets & Shutter Sections should be cut to length and mitre joined with Corner Bracket. Window Frame should be fixed to brick/ concrete masonry by using Nylon selfexpanding caps and driving MS electroplated 80mm long screws into the caps through frames.10mm square guard bars with 6? pitch (152.4mm) max to be fixed wall to wall and all taxes complete for finished item of work

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 55 mm x 2.40 mm for outer frames, 74 mm x 60 mm x 2.40 mm for mullion sections as per the need and 102 mm x 60 mm x 2.40 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gaskets for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall be provided with 4 no?s of 3D Hinges for each shutter and multipoint locking with keys with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Providing HYSD bar reinforcement Fe-500 procured from Steel Manufacturers from TATA, SAIL, VSP, Jindal Panther, AF star TMT/MS Life TMT, Radha TMT and Suguna TMT etc. as per IS 1786-1979 of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.( APSS No.126)

Construction of Staff room, Reservoir and Pump room, Store room and drain;Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding with using MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Construction of Staff room, Reservoir and Pump room, Store room and drain;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using Rough Stone (HBG) carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., excluding all duties and taxes complete for finished item of work in foundation and basement. (APSS No. 601 & 615)

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of M-30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20 mm size graded machin crushed hard granite metel (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and Excluding Seigniorage charges, Sales and other taxes on all materials including all oprational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO.402) with minimum cement content as per IS code from standerd suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finish item of work. For Reservior Top Slab & For Drain Slab 300mm thick Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of M-30 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20 mm size graded machin crushed hard granite metel (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc. to site and Excluding Seigniorage charges, Sales and other taxes on all materials including all oprational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS NO.402) with minimum cement content as per IS code from standerd suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finish item of work. For Reservior Side walls & For Drain Side walls 300mm thick Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit,all taxes except GST complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Reservior Bottom Slab & For Drain Bottom Slab 300mm thick Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Chajjas Over Doors and Windows and Bed blocks Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Lintels Over Doors And Windows Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) RCC Roof Slab (150mm thickness) Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Roof Beams Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) Plinth Beams Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Columns Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand)(manufactured sand and natural sand in the ratio of 50:50) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering platesetc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) For Column Footings Note: 1) The quantities for cement , coarse aggregrates and fine aggregrates are for estimating purpose only. The exact quantities will be as per mix design. 2) For estimate purpose Cement Content is taken as 400Kg/Cum. As per mix design, if the cement content is found to be less than 400 kgs per cum of concrete, the difference in cost shall be deducted. 3) Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of Plain Cement Concrete (PCC) M15 by Design Mix corresponding to IS 456 using Concrete Mixer and with minimum cement content (cement content is taken as 275kgs) as per IS 456-2000 and standard mix design as per IS:10262:2009 with 20mm size graded (40mm-40%,20mm-40% & 10mm-20%) machine crushed hard granite/trap/dolerite metal free from dust obtained by machine crushing and blasting and fine aggregate including cost and conveyance of all materials, labour charges, water charges, pumping, including form work, laying concrete, vibrating, curing, including dewatering charges etc.,complete for finished item of work but excluding cost of steel and its fabrication charges and seigniorage charges. Note: 1. The quatities for cement , coarse aggregrates and fine aggregrates (50% natural sand and 50% manufactured sand) are for estimating purpose only. The exact quantities will be as per mix design. 2. For estimate purpose Cement Content is taken as 275 Kg/Cum. As per mix design, if the cement content is found to be less than 275 Kg/Cum of concrete, the difference in cost shall be deducted.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Supply and placing of Plain Cement Concrete (1:4:8) nominal mix using concrete mixer for foundations and under flooring bed using coarse aggregate 40mm size machine crushed Hard broken stone of Granite, Trap and dolerite free from dust obtained by quarrying, wedging, breaking, burning and splitting including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Note: Manufactured sand (Rock Sand) not more than 50% of total sand content can be used.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Bailing out water using 5HP Diesel dewatering pumps for earth work excavation /concrete for foundation below water level using dewatering pump for complete finished item of work.

Construction of Staff room, Reservoir and Pump room, Store room and drain;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary Soil - Manual Means up to 3m depth