Municipal Corporation Tender

civil work;Fixing of Precast kerbing blocks of 600 mm length true to its alignment as specified by the Dept to form divider including pointing with cement mortar (1.3) prop Cost and conveyance of all materials like cement, sand, water etc to site, including curing and labour charges for mixing, etc complete.

civil work;Supply of precast cc blocks (of 600*325*150/115mm) for kerbing made with rubberized moulds of M30 grade design mix with 350 kgs cement/cum of concrete. 20mm ? 6mm nominal hard granite machine crushed metal at 0.80 cum/cum of concrete and sand at 0.4 cum/cum of concrete including cost and conveyance of all materials like sand water coarse aggregate etc complete.

civil work;Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701MORD. On new concrete surfaces

civil work;Providing and fixing Mandatory / Regulatory sign boards size 600 mm circle made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and conforming to IRC 67:2012 for full background of white colour and letters logos done by screen printing in Black colur, boarders by screen painting in red colour and fixed over 3MM alluminium composite Material sheet having minimum 0.30mm thick Alluminium skin on both sides with back side painted grey colour and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials equipment, machinery and labour with all leads and lift loading charges necessary for satisfactory completion of the work as directed by Engineer-in-charge