Municipal Corporation Tender

RCC SWD Drain;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Earth work excavation Ordinary Soil-Manual Means-Upto 3 m depth

RCC SWD Drain;Carting of excavated earth with a lead of about 14 KMts, including cost and conveyance of all materials and all labour charges, contractor profit and over head charges etc., complete for finished item of work as directed.

RCC SWD Drain;Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges and contractors profit. (Pg.No.32/617, Sl.No.97, SSR 2023-24)

RCC SWD Drain;Dewatering pump 5hp (diesel) including cost and conveyance of all materials etc complete (Pg.No.49/617, Sl.No.26, SSR 2023-24)

RCC SWD Drain;Supply and filling with Stone crusher Dust finer than 3mm with not more than 10% passing 0.075 sieve (exluding rock) in trenches sides of foundations and basement with intial lead inlayers not exceeding 15 cms thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges hire charges of T & P etc., complete for finished item of work

RCC SWD Drain;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, centering, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design (M10-220 Kgs) . including formwork @ 4.00 % of cost of concrete i.e. cost of material, labour and machinery. For bed (RBR-FNFN-5)

RCC SWD Drain;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, centering, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. including formwork @ 3.5% of cost of concrete i.e. cost of material, labour and machinery. (For Bottom Slab) , Cement (@ 360 kg/Cum). For bottom slab, Foundation, BLD-CSTN-3-17

RCC SWD Drain;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading , curing for 14 days, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design. For Side Walls , Cement (@ 360 kg/Cum). (a) For side walls, 250 mm thick

RCC SWD Drain;(b) For top slab, 250 mm thick

RCC SWD Drain;Supplying, fitting and placing HYSD bar Fe 500 reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including all charges etc., complete

RCC SWD Drain;Supply and filling with good gravel (exluding rock) in trenches sides of foundations and basement with intial lead inlayers not exceeding 15 cms thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges hire charges of T & P etc., complete for finished item of work

RCC SWD Drain;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. (without paver finisher)

RCC SWD Drain;Supply and placing of the Ready Mix Concrete (RMC) M10 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, centering, shuttering vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, for finished item of work. (M10-220 Kgs), {50% natural river sand + 50% rock sand}

RCC SWD Drain;Supply and placing of the Ready Mix Concrete (RMC) M30 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, centering, shuttering vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, for finished item of work. (M30-350 Kgs) {50% natural river sand + 50% rock sand}

RCC SWD Drain;Supply and fixing of DI covers with frame of 600mm * 600mm, 90kg size including all charges etc., complete

RCC SWD Drain;Providing barricading arrangement with casurina ballies as per design duly excavating pits and its removal after the function is over including hire charges of the barricading materials as per the schedule given by the departmernt authorities complete for finished item of work. 2-TIER (2 Nos Horizontals- 6'-0" long -1 No Vertical- 4'-0" High)

RCC SWD Drain;House service water supply pipe connections including cost and conveyance of all materials etc complete.

RCC SWD Drain;Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5'0") depth and refilling with watering and tamping. (Pg.No.259/617, TBSP-A.I-03, SSR 2023-24)

RCC SWD Drain;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. 4 Kg/CM2 160mm dia (Pg.No.562/617, SSR 2023-24)

RCC SWD Drain;Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice. (Pg.No.294/617, TBSP-H.IV-01, SSR 2023-24)

RCC SWD Drain;Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in 6 M.). OD 110mm 6Kg/sqcm (Pg.No.553/617, SSR 2023-24)

RCC SWD Drain;Deduction of 60% of Old Randum Rubble Stones

RCC SWD Drain;Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes conforming to B.I.S. 458/2003 including conveyance charges, rubber rings. RCC - NP3 - 1000MM dia, S/S

RCC SWD Drain;Lowering the RCC S/S for NP3 pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 For 1000 mm dia and above (SSR item) (Pg.No. 503/617, SSR 2023-24)

RCC SWD Drain;Supply of 900mm*900mm DI Jali with frame-150kgs including C/ of all materials to site, labour charges etc complete.

RCC SWD Drain;Supply of 750mm*750mm DI Jali with frame-150kgs including C/ of all materials to site, labour charges etc complete.

RCC SWD Drain;Supply and delivery of RCC Perforated square cover of size 0.7*0.7*0.125 mts

RCC SWD Drain;Supply and delivery of RCC Perforated base frame of size 0.9*0.9*0.2 mts