Municipal Corporation Tender

Gym equipment;Providing Annual Maintenance 5th year @ 6% of total contract amount for Rs.4,6,4,628.00

Gym equipment;Seater Twister or Seating Twister: Technical Specification: Tripple equipment Seating twister with below dimensions: 1. Dimensions (LxWxH): 1500 x 1500 x 1350 mm 2. Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3. Main frame of NB 50mm (G.I.) ?C? Class Pipe. 4. Support frame of NB 32mm & NB 25mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Maintenance free bearings of SKF or equivalent make duly oil sealed and self- ubricated are used in the equipment manufactured. 9. Seats made up from round MS Sheet Metal. 10. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 11. Once the concrete is set, the equipment is fixed on to it. 12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment made to EN16630 & DIN 79000 nternational standard for outdoor fitness equipment. 14. Self-Explanatory stainless steel label fixed on equipment for ease of use. 15. Base plate cover and all open end pipes covered by SS / LLDPE Caps.

Gym equipment;SUPPLY, Delivery and Installation of Double Cross Walker(Duos Cross Trainer)/ Arm Strengthener with Carrying Capacity of 2 Persons of overall sizes 1100 x 915 x 1430 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron aterials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 80mm NB & 60 X 40 mm Rectangular Tube fixed with Deep rooveé Self Aligning Ball Bearings and Handle bars madeup of High Quality Grip Rubber using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge including inland Transportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

Gym equipment;Shoulder Fly : Technical Specification: 1. Dimensions (LxWxH): 500 x 500 x 2500 mm 2. Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3. Handle main frame of NB 50mm (G.I.) ?C? Class Pipe and MS Sheet. 4. Handle of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing. 8. Handle bars are provided with high end quality rubber grips. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 11. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 12. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 13. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 14. High tensile steel with galvanized nut bolts are used for assembly. 15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16. Self-Explanatory stainless steel label fixed on equipment for ease of use.

Gym equipment;SUPPLY, Delivery and Installation of Leg Extension : Technical Specification: Leg Extension with below specifications: 1.mensions (LxWxH): 750 x 300 x 1200 mm 2. Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipeof approved make. 3. Seat Main frame of NB 50mm, Handle frame of NB 25mm, Leg frame of NB 32mm. All pipes used must be G.I.) ?C? Class Pipe. 4. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 5. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 6.Zinc primer paint is applied at all the welding points prior to finishing. 7.Base plate cover and all open end pipes covered by SS / LLDPE Caps. 8.Foothold made of NB 65mm (G.I.) ?C? Class Pipe. 9. Seats made up from virgin LLDPE manufactured by ational molding with 4.00 mm thickness, colored, UV resistant and environmental friendly. 10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 11. The equipment are fitted with inbuilt limiters to prevent unwanted movements. 12. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped elded bolts of 18mm thickness. 13. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 14. High tensile steel with galvanized nut bolts are used for assembly. 15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16. Self-Explanatory stainless steel label fixed on equipment for ease of use. 17. Handle bars are provided with high end quality rubber

Gym equipment;SUPPLY, Delivery and Installation of Shoulder Press with Carrying Capacity of 2 Persons of overall sizes 1800 x 700 x 1900 mm with eat Size of 300 x300 mm dia made of Hot Dipped Galvanized Pipes onfirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB &32 mm NB ,60 X 40MM NB Rectangular Tube fixed with Deep rooveé Self Aligning Ball Bearings and using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 7081.00 ( Item Price)+ Rs. 1369.00 for inland Transportation, nsurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

Gym equipment;SUPPLY, Delivery and Installation of Chest Press with Carrying Capacity of 2 Persons of overall sizes 1800 x 700 x 1900 mm with Seat Size of 300 x 300 mm dia made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting tructure 25NB &32 mm NB ,60 X 40MM NB Rectangular Tube fixed with Deep Grooveé Self Aligning Ball Bearings and using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be owder Coated ( 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge.( The Total Unit Cost is = Rs. 68257.00 ( Item Price)+ Rs. 1393.00 for inland ransportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.Materials and Heavy Duty (C Class) series of pipes nly.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25NB & 40MM NB. fixed with Deep Grooveé Self

Gym equipment;SUPPLY, Delivery and Installation of Air Walker (LEG stretch straight) /Capacity of 1 Person of overall sizes 1100 x 550 x 1300 mm made of Hot Dipped Galvanized Pipes Confirming to IS 1239(Part-1) with GI thickness 60 micron Materials and Heavy Duty (C Class) series of pipes only.Equipment should be made up of 100 NB Main Post pipe with Supporting Structure 25mmNB& 40MM NB, 50mm NB and 60 X 40 mm Rectangular Tube with Standing BASE SIZE OF 320 x 135 MM fixed with Deep Grooveé Self Aligning Ball Bearings & thrust bearings using hard ware of Grade 4.60 Galvanized.The Painting to the Equipment should be Powder Coated 80-100 microns thickness.All open end pipes should be covered with SS/LLDPE caps & the equipment is grouted with M18 Foundation Bolts with Concrete Strength of M25 for Safety and Stability and as directed by the Engineer-in-Charge. including ransportation, Insurance and other Services required to Convey the Goods to the Final Destination but Excluding GST for complete item of work.

Gym equipment;Supply and fixing iron grills MS angle frames including cost and conveyance of all materials and labour charges for cutting, placing, welding and erecting in position and fixing, cost & convenience of all materials including wastage to site with all taxes and duties etc complete for finished item of work as directed by the Enginer in Charge.

Gym equipment;Filling with good Gravel soil, including supply and delivery of good gravel for filling, including cost of gravel, and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Gym equipment;Painting ACE new walls with 2coats water proof emulsion of approval brand ACE Emulsion over base coat of approval primer garde-I including all labour charges for finished item of work as directed by the Engineer - in - Charge.

Gym equipment;Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete but excluding seigniorage charges for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)

Gym equipment;Brick masonary in CM (1:6) with 2nd class bricks traditional size 23x11x7 cm including c/c of all material and water to work at site and all operational incidental, labour charges such as scaffolding, mixing mortar lift charges curing etc complete for finished item of work.

Gym equipment;Plain Cement concrete Grade M20 - Nominal Mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.

Gym equipment;Construction of RR Masonary in C.M (1:6) prop. (with department stones) Using hard granite stone including cost and conveyance of all materials like cement, sand,water, Granite stone etc. on all materials, including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work

Gym equipment;Earth work excavation for foundations and depositing on bank for all lifts with an initial lead of 10m including all operational ,incidental, labour charges such as shoring, sheeting ,planking ,strutting etc complete for finished item. excluding dewatering charges etc. as per SS-20B (APSS 308)