Municipal Corporation Tender

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Fixing of Luminaries to existing poles including cost of labour charges etc., complete job work

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply laying of 10 sqmm 4 core alluminium cable

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply of 10sqmm XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Fabrication, transportation and supply of 0.50cm length single arm standard bracket made with galvanized 40mm dia with back clamp fixing with 10x100mm long nuts and bolts to high mast ring

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply & fixing of 6-32 ams SPMCB 10KA, C/D curve

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply of 6sqmm WPTC (weather proof twin core ISI Alluminium Wire.

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Fixing of Luminaries to existing poles including cost of labour charges etc., complete job work

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply of 3 core 1.5 sqmm PVC Insulated and FRLS Round Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS:694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI /

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtrx0.60Mtrsx1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil excavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc. complete

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Fabrication, supply and fixing of luminaries cariage, made with 50mm dia MS Galvanised pipe, moulded to 3 ft dia ring wheel and 40mm dia MS support pipes on 4 sides inside the wheel and necessary size of MS pole cap for fixing the ring wheel on 156mm dia MS pole for fixing of flood light and gear box with suitable nuts and bolts and painted with redoxide and AL paint including cost and conveyance of all materials etc., complete

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply and transportation of 110 W +/-10% (>=11000 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, Thermal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Driver surge protection >10KV, THD70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.LUMINAIRE

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement,including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175mm, Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x750mm long 'J' bolts along with template

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make63A, 4 Pole MCB as incomer, 6 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Earth work excavation with an approximate quantity of 4.0 Cum for erecting of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for erecting of High Mast and Carriage etc complete including soil testing.

Providing 10mtr and 12mtr highmast lighting system with polygon at ursu kareemabad in div no.40.;Fabrication, transportation, and supply of 12 Mtrs Polygon High Mast with single section of 3mm thick of Bottom 360mm and Top 150mm dia with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate, having a base plate of size 520mm dia 16mm thick with its accessories. Mast shall be in single section for 12 Mtrs . Mast shall be hot dip galvanized and suitable for wind velocity of 180 KMPH as per IS 875 part 3 including head frame, 2 point suspension system with steel rope 6mm dia (7/19) construction double drum winch / power tool , and necessary cable trailer connections and single speed motor with M 24 x 800 mm foundation bolts of required quantity, suitable for 6 luminaires with GLS type aviation twin lamp. Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / CONSOUL