Municipal Corporation Tender

Footpath;Brick masonry in C.M (1:6) prop. Using IInd class traditional size bricks of locally available size of 23x11x7cm having a crushing strength of not less than 35 Kg/cm² including cost and conveyance of materials to site, mixing of cement mortar and laying of bricks and mortar to specified thickness, watering, curing, including all scaffolding, hire and operational charges of machinery, all labour charges and all water lead charges etc., complete for finished item of work

Footpath;Painting to exterior surface of walls in single coat with approved water proof Cement paint of superior quality brand shades (with out making different colours or stainers at site) including cost and conveyance of all materials to site, al taxes, labour charges, curing etc., Complete for finished item of work in all floors. (As per SS. 170 ) per 10 sqm.

Footpath;Fixing of Precast kerbing blocks of 600 mm length true to its alignment as specified by the Dept to form divider including pointing with cement mortar (1.3) prop Cost and conveyance of all materials like cement, sand, water etc to site, including curing and labour charges for mixing, etc coMetro Pillarlete

Footpath;Construction of cement kerb \with top and bottom width 115 and 165mm respectively 250mm high in M20 grade PCC on M-10 grade foundation 150 mm thick foundation having 50 mm projection beyond kerb stone,laid with kerb laying machine foundation concrete laid manually, all complete as per clause 408/ MORTH size (0.60x0.11x0.40)

Footpath;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M10) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Footpath;Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, dewatering charges, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH

Footpath;Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH using Air compressor 210 / 250 cfm with two leads for pneumatic cutters / hammers @ 1 cum per hour (diesel 7cmm)