Municipal Corporation Tender

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Manufacture supply and delivery of rubber rings to suit 900 mm dia rcc socket and spigot np3 pipes confirming to bis 5382/1985 (rate per each rubber ring) including transportation

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Lowering the RCC NP3 900mm dia plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with cement joints including curing, the cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including filling with water with a water lead upto 500 metres excluding cost of rubber rings as per BIS No.783/85.

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Carting the excavated earth to a lead of 10 KMS including Labour chargess for loading and unloading, Transportation etc. complete as per specification

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Laying of P C.C. (1:4:8) prop using 40mm metal with concrete mixer upto plinth level including cost and conveyance of all material, labour charges, Centring machinery laying in position, curing for (7) days and all its incidential charges etc., complete as per S.S. for catchpit Bed

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.-Base slab

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Engaging Dewatering 10hp diesel pumpset including all hire and fuel charges etc

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix desig. for side walls 300mm thick

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Supply and placing of RCC M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, dewatering , curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete. Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. 2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix desig. for top slab 300 mm thick

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202 MORD & 1100, 1600 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded.

Remodeling of existing SWD with RCC NP3 pipeline 900 mm dia;Supply and delivery of DI covers with frame, cover of size 600mmx600mm -weight 90kg incl.cost and conveyance charges