Municipal Corporation Tender

Removal of water stagnation and Laying CC Roads;Saw cut joints for freshly laid concrete pavement includig cost and conveyance of all materials. (Horizontal)

Removal of water stagnation and Laying CC Roads;Filling with Good Gravel soil, including supply and delivery of good gravel for filling, including cost of gravel, seinourage charges and conveyance to site, filling charges, watering, tamping and rammming and all labour charges and operational charges complete as directed by the Departmental officers.

Removal of water stagnation and Laying CC Roads;Carting of excavated surplus earth to an initial lead of 5.00 km from site of work including loading, unloading & conveyance charges etc., complete

Removal of water stagnation and Laying CC Roads;Raising of existing manhole upto 0.10mt depth with Flyash Bricks in Cm(1:4) including Internal plastering 20 mm thick in CM(1:3) and External Plastering 12 mm thick in CM(1:3) and top benching in CC(1:2:4) including cost and conveyance of all materials and labour, Seigonarage charges, Curing and all taxes etc. complete.

Removal of water stagnation and Laying CC Roads;Supply of 25mm thick high performance premoulded expansion joint filler board (SILFLEX CAPCELL HD-100 or equivalent make), placing the same 25 mm below top of pavement slab, sealing with bituminous hot sealing compound (Grade 'A' ISI)/polysulphide at 50 m interval in CC pavement including cost and conveyance of all materials for expansion joints conforming to MORTH specification No. 602 - 1 Rmt of joint length for 100 mm thick slab

Removal of water stagnation and Laying CC Roads;Supply and placing of impermeable plastic sheet 125 micron thickness over cement concrete mix as a separation membrane including cost and conveyance of all materials etc., for finished item of work.

Removal of water stagnation and Laying CC Roads;Supply and placing of Ready Mix Concrete M 30 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M30) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Removal of water stagnation and Laying CC Roads;Supply and placing of Ready Mix Concrete M 10 as per IS-4926:2003 of following grades with minimum cement content as per IS-456:2000 and Standard mix design as per IS-10262:1982, with coarse aggregate of nominal size 20mm and fine aggregate of Zone II as per the mix design approved by the Department from Standard suppliers including cost and conveyance, vertical pumping and Horizontal pumping on all materials, etc., works for basic cost including leveling, grading, spreading, curing for 14 days, centring, vibrating, compacting, finishing etc., as required including, material taxes, pumping, transportation, approved admixture etc., complete.(RMC-M10) Note: 1.Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used.2. The quantities for cement, coarse aggregates and fine aggregates are for estimating purpose only. The exact quantities will be as per mix design.

Removal of water stagnation and Laying CC Roads;Providing laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug mill) carriage of mixed material by tripper to site, laying in uniform layers in sub- base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100 kn/ vibratory Roller 80-100 KN weight to achieve the desired density including lighting,barricading and maintenance of diversion etc as per Tables 400.11 @ 400.12 and Techinical specification clause 406 MORD/MORTH.

Removal of water stagnation and Laying CC Roads;Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead upto 50 m as per Technical Specification Clause 302.3 MORD

Removal of water stagnation and Laying CC Roads;Cutting open B.T. road surface including stacking of excavated materials including hire charges of all tools and plants and all labour charges for finished item of work as directed by the Engineer - in - Charge.

Removal of water stagnation and Laying CC Roads;Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (electric 5 cmm)