Municipal Corporation Tender

SWD;Supplying 600mm dia NP2 class pipes, including, labour charges etc., Complete as per specification.

SWD;Supplying 600mm dia NP2 class collars, including, labour charges etc., Complete as per specification.

SWD;Lowering 600mm N.P2 class pipe , jointing with cement mortor 1:1.5 prop including labour charges etc., complete specification for finished item of work

SWD;Filling with Excavated Earth (Ordinary Soil) including cost and conveyance of all labour charges etc., complete for finished item of work.

SWD;Supply and fixing of RCC perforated covers with base frames including all incidental all labour charges etc. complete

SWD;PCC Grade M15- Nominal Mix using 40mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, including all operational, incidental and labour charges such as machine mixing, laying concrete, centering, shuttering curing etc.,complete for finished item of work.( Hand Mixing)

SWD;Supply and placing of the M-30 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

SWD;Supply and placing of the M-10 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 220Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

SWD;Carting of excavated earth to a lead of 15 kms including and unloading charges etc., Complete as per specification.

SWD;Supply of dish floating with power floater mechanical trawelling,finishing with sound edges and corners including hire and operational chargesw of machinery ,labour ,fuel etc., complete