Municipal Administration Department Tender

Laying of CC Road from H No 2 2 54 to H No 2 2 14 in Ward no 20 of Vemulawada Municipality under MPL;RBR-FNDN-1: Earth work excavation in Ordinary Soil byMechanical Means Dozer-80 as per drawing and technical specifications Clause 305.1 including setting out, construction of other deleterious material and disposal upto a lead of 100 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Laying of CC Road from H No 2 2 54 to H No 2 2 14 in Ward no 20 of Vemulawada Municipality under MPL;BLD-CSTN-3-5 (22) : Plain Cement concrete nominal mix (1:4:8) prop (Cement : fine aggregate: coarse aggregate ) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work.For foundation.

Laying of CC Road from H No 2 2 54 to H No 2 2 14 in Ward no 20 of Vemulawada Municipality under MPL;cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement @ 400 kg per cum or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.