Municipal Administration Department Tender

Construction of Community Hall;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal/external threaded connection conforming to IS 8931 at all levels including cost & conveyance, sales tax royalties of all materials, labour charges for finished item of work as per special specification and as directed by the Engineer-in-charge for finished item of work. (TBSP-F-1-01)

Construction of Community Hall;110 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe 4 Kg/sq.cm 110mm dia for Drainage, Water and Vent pipes

Construction of Community Hall;Construction of 457.20mmx457.20mm inspection chamber with brick masonry using 2nd class modular size (19x9x9cm) in CM (1:6) prop. upto a depth of 914.40mm including excavation in all types of soils laying 100mm thick plain CC (1:5:10) prop. bed making channel in plain CC (1:2:4) prop. 12mm thick plastering in CM (1:4) prop to inside & outside walls & fitted with light weight 457.2 mm x 457 2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost seignarage, sales tax royalties of all materials, conveyance complete as per special specification and as directed by Engineer-in-charge for finished item of work. (TBSC-B-11-02)

Construction of Community Hall;Supplying & Fixing of Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556- Part-3-2004 with "P" or "S" trap 580mm x 440mm including 10 lit low level porcelain of approved make flushing cistern confirming to IS 7231 with all internal fittings, CI brackets, 31.50mm CP flush pipe, 15mm dia 450mm long PVC connector, 15mm dia CP brass stop cock 300 grams of ISI make, cutting and making grooves the walls and floors wherever required including cost and conveyance, of all material to work site, all labour charges for fixing etc., complete as directed by Engineer-in-charge for finished item of work. (Neycer/Parryware or Hindustan)

Construction of Community Hall;Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete as directed by the Engineer-in-Charge. SPN for GF

Construction of Community Hall;Supply and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W. BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation B. 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle' kit, safety rope, copper winding. Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or with all standard accessoriesand 400W Mini Modular Stepped type Electronic Regulator with Cover Frame including providing fan hook of 12/15mm dia M.S. rod/bar grouted in RCC slab with making the slab as original and 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan etc, complete

Construction of Community Hall;Supply and transportation of 20W +/ 10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD D<15%, with inbuilt driver and rosted cover CCT: 3000K 6500K as desired by the department and as per IS specifications, minimum CRI=80, etc complete with 5 years warranty with BIS Certification LUMINAIRE MAKE Phillips/ OSRAM/Wipro/Crompton/Bajaj/Havells/Jaquar/Panasonic/Halonix/HPL/ Eveready /Surya/Keselec/Arraystorm/GM/Goldmedal/Goldwyn/Fortune Arrt/ Lighting Technologies

Construction of Community Hall;BLD-ELEC-3.1.4, Supply and run of 1 of 36/0.3mm (2.5 Sq.mm) FRLSH/HFFR.Pvc insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete Make Finolex/RR Kabel/Havels/Polycab/Baijin/Finecab Gold/EM/Gold Madel/Million

Construction of Community Hall;Supply and fixing of 16A 3pin/6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete as directed by the Engineer-in-Charge on wall Switch & Socket Makes: GM G Home/Gold Medal Olive/Million Zoom/Anchor Penta Cherry/Great white Omega/HPL/Vimal/CPL

Construction of Community Hall;Supply and erection for approved make 1No 6A module type switch with 6A 3 pin modular type socket mounted on Gi metalic box covered with appropriate modular front plate as directed by the Dept including conveyance and all materials and labour charges etc on separate board complete for RAW power supply (Makes Legarand Mossaic/ L&T/ MK Blenz/ Schnieder) (INDEPENDENT SOCKETS)

Construction of Community Hall;Wiring with 2 runs of 22/0.3mm (1.6Sq.mm) Fire Retardent (FR) PVC. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.

Construction of Community Hall;BLD-CSTN-9-6-(104) Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS.13712, IS 13630 (Parts 1 to 15) of any colour and finish in all shades and design, set over base coat of cement mortar (18) 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, etc., complete for finished item of work, including the cost and conveyance of all materials

Construction of Community Hall;BLD-CSTN-9-18-(116) see Ref:9-23-(121-b): Dadooing to walls with plain white glazed wall tiles of 200 x 300 mm/245 mm x 325 mm size and of 5 to 7 mm thick set over a base coat of CM(1:3) Prop 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter toilets) and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc to site, all operational, incidental and labour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc. complete for finished item of work (for toilets)

Construction of Community Hall;BLD-CSTN-9-1-(99): Flooring with Polished Shabad stones 1st class 15 to 18 mm thick (Tandur Stone slabs) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc.,, complete for finished item of work, including the cost and conveyance of all materials.

Construction of Community Hall;Painting to new walls with 2coats of waterproof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remain soft loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Construction of Community Hall;BLD-CSTN-12-4-(171) Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) to give an even shade aller thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials finished item of work as per 55.912 to work site and all operational, incidental, labour charges etc. complete for finished items of work as per SS 912

Construction of Community Hall;BLD-CSTN-8-9-(84) Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer in charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) (External walls)

Construction of Community Hall;Supplying and fixing of MS grills using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.00mm MS sheet at bottom 0.30m height and 12mm MS square bars Vertically at 125mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and painting gate with one coat of red oxide primer including cost and conveyance of all materials, Locking arrangment, Ornamental pieces etc, cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.

Construction of Community Hall;TBSC-M II-09, Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track-2 Panel Sliding windows duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100mm)/(60 mm x 45 mm) x 2.20 mm for outer parts of PVC resin) of (62 mm x 60 frames, (66 mm x 38 mm)/(58 mm x 39 mm) x2 20 mm for slid imounting single glazing system, structurally ng shutter frames capable of rein forced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation erection at site complete for finished item of work

Construction of Community Hall;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Shatterof 30 mm thick including cost and Fixing charges etc, Complete (TBSC-L-1-18)

Construction of Community Hall;BLD-CSTN-5-4-(42): Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, etc., to site including all labour charges like mixing Cement Mortor, scaffoding charges lift charges, curing charges etc., complete for finished item of work

Construction of Community Hall;BLD-CSTN-6-6-(61) Construction of RR Masonry in Cement Mortor (6) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand, Water, Granite Stones, including Seigniorage Charges on all Materials, labour charges for cutting Stones to required size and shape, mixing of Cement Mortor, Construction, Scaffolding Charges curing etc., complete for finished item of work

Construction of Community Hall;BLD-CSTN-3-5 (22) - Using Concrete mixture all works up to Plinth Level: Plain Cement concrete nominal mix (1:5:10) prop (Cement: fine aggregate coarse aggregate) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site, seigniorage charges on all materials, labour charges, for mixing, laying, concrete, ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work for foundation and under flooring bed.

Construction of Community Hall;BLD-CSTN-2-1 (9) Earth work excavation in Ordinary Soil by Manual Means-Upto 3 m depth for structures in all types of soil as per drawing and technical specifications and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS 20 B (APSS 308)