Municipal Administration Department Tender

Establishment of Open Gym;LEG CURL Main frame made from GI "C" class pipes are 114 mm, Foundation Plate - MS round plate of 220 mm and 10 mm thickness, Handle 42 mm and 13 mm "B" Class G.I Pipes, Seat frame 42 mm B Class Gl Pipes, Seat 300*300mm*2mm thickness with corner filler with safety, Leg frame 42 mm B class Gl Pipes, Bearing Bushes - 60 mm seamless pipe excluding GST complete for finished item of work with necessary fitting if any

Establishment of Open Gym;ARAM PULLER Supply, Delivery, Installation and Commissioning of PULL DOWN CHALLENGER / SHOULDER EXERCISER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with MIG welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. for finished item of work with

Establishment of Open Gym;WIND BOARD providing & fixing Surt Board made from GI pipe Dimensions (LxWxH)= 1020x860x1300mm Main Frame Made From GI (C Class) pipe 114mm OD Foundation Plate M.S round plate of 220mm & 10mm thickness. Remaining frame made up of 42mm B class GI pipe Handle 42mm and 33mm B class GI pipe Support pipe 60mm is use to support leg movement frame Foot rest cast iron 320x280x3.5mm thick bracket 6mm thick laser profile is use to support leg movement from Top closing cap dome shaped by Gl material Bearing:- Deep Groovee Self Aligning ball Bearings with permanent lobricated reputed brand pins 25mm OD M.S Bright bar pin Bearings Bushes 60mm OD seamiess pipe Grips High Quality rubber 46mm OD Coating Best quality of powder coating 80-100 microns thickness hardware Grade 4.6 galvanized Maximum loading weight 240kg and only two persone can use at a time safety instructions and Exercise chart start &finish position stick on product. for finished item of work with necessary fitting if any

Establishment of Open Gym;Supply, Delivery, Installation and Commissioning of TWISTER 3 IN 1 (SITTING-1, STANDING - 2) with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with MIG welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. for finished item of work with necessary fitting if any

Establishment of Open Gym;LEG PRESS Providing and fixing Leg Press Double made from GI pipe Dimensions (LxWxH)= 2000X400X1600MM MAIN FRAME 114MM OD G>I "C" Class pipe 2) Foundation Plate M.S round plate of 220mm 10mm thickness 3)Seat frame 42mm OD"B" class G.I pipe 4) Seat frame 320x300mmx2mm thick G.I Seat With corner fillet for safety 5) Bearing Deep groovee Self Aligning ball Bearings with permanent lubicated Reputed brand 6) Bearing Bushes 60mm OD seamless pipe Top Closing Caps Gl material Coating best Quality of powder coating 80-100 microns thickness Hardware grade 4.6 galvanized maximum loading weight 240kg and only two persons can use at a time safety instruction and Exercise chat start & finish Position Stick on Product. for finished item of work with necessary fitting if any

Establishment of Open Gym;CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with MIG welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. for finished item of work with necessary fitting if any.

Establishment of Open Gym;Supply, Delivery, Installation and Commissioning of AIR WALKER DOUBLE with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with MIG welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 75mmX150mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with GMC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co- Polymer (PPCP) and UV-stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630 for finished item of work with necessary fitting if any.

Establishment of Open Gym;Plastering with 12mm thick in single coat in CM (1:3) finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903). per 10 Sqm.

Establishment of Open Gym;BLD-CSTN 5-17 (55):Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls.

Establishment of Open Gym;Vibrated cement concrete (1:2:4) using of 20 mm graded HBG metal with normal mix including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge.

Establishment of Open Gym;BLD-CSTN-3-5 (22): Plain Cement concrete nominal mix (1:4:8) prop (Cement: fine aggregate: coarse aggregate) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials cement, sand, coarse aggregate water etc., to site, seigniorage charges on all materials, labour charges, for mixing, laying, concrete, ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work for foundation and under flooring-bed.

Establishment of Open Gym;Collection and supply of stone chips of 2.36mm to 7.00mm and filling in foundation treanches as per drawing and technical specification clause 305.3.9 MORD & 304 MORTH

Establishment of Open Gym;Earthwork in excavation for Foundation of Buildings as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH