Municipal Administration Department Tender

Providing chain link Mesh;Supply fabricating, installing structural steel supports fixing all sizes of MS pipes with MS Angles, MS channels as required at site with anchor fasteners, clamps, threading rods, nuts, bolts, washers etc complete with painting

Providing chain link Mesh;Supplying and fixing of MS Gate using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.00mm MS sheet at bottom 0.30m height and 16mm MS square bars Vertically at 100mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and including cost and conveyance of all materials, Locking arrangment, Ornamental pieces etc, cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work. for 3.00m & above 3m span gates MS Gates 1 Sqm 20.00 kgs

Providing chain link Mesh;BLD-CSTN-4-1-(34): Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT)/Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap- splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including

Providing chain link Mesh;BLD-CSTN-3-14-(31)-A: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing. laying concrete, vibrating, curing, centering and suttering charges etc..complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note: 1) The cement content is adopted as 350Kg/cum for estimating purpose only. The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 380 Kgs/ Cum the defference in cost shall be deducted For Basement

Providing chain link Mesh;BLD-CSTN-3-15-(31) B: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing. laying concrete, vibrating, curing, centering and suttering charges etc., complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS. Note: 1) The cement content is adopted as 380Kg/cum for estimating purpose only. The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 380 Kgs/Cum the defference in cost shall be deducted.

Providing chain link Mesh;Pedestals

Providing chain link Mesh;BLD-CSTN-3-14-(31) A: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyarice of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site. sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc., complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note: 1) The cement content is adopted as 350Kg/cum for estimating purpose only. The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 380 Kgs/ Cum the defference in cost shall be deducted Footings for Gate Columns and

Providing chain link Mesh;7 BLD-CSTN-3-3: Using Concrete mixture up to Plinth Level: Plain Cement concrete nominal mix M15 (1:2.5:5) using coarse and fine aggregates including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site, seignidrage charges on all materials, labour charges, for mixing, laying, concrete, ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement

Providing chain link Mesh;BLD-CSTN-7-3-(74): Providing Raised Cement Pointing to RR Masonary in Cement Mortor (1:3) Prop. for including cost & conveyance of all materials to site, seignaiorage charges on all materials, labour charges on all materials, curing for Compound wall Basement, etc., Complete for finished item of work

Providing chain link Mesh;BLD-CSTN-6-13-(68): Construction of RR Masonary in Cement Mortor (1:8) Prop using hard granite stone induding cost & Conveyance of all materials like Cement, Sand, Water, Granite Stones, induding Seigniorage Charges on all Materials,, labour charges for cutting Stones to required size and shape, mixing of Cement Mortor, Construction, Scaffolding Charges curing etc., complete for finished item of Work

Providing chain link Mesh;BLD-CSTN-3-5 (22) -Using Concrete mixture all works up to Plinth Level: Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) for Compound wall Basement

Providing chain link Mesh;BLD-CSTN-2-7-(15); Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS-20 B (APSS 308).

Providing chain link Mesh;BLD-CSTN-2-1 (9): Earth work excavation in Ordinary Soil by Manual Means- for structures in all types of soil as per drawing and technical specifications and depositing on bank for all lifts and with an initial lead of 10m including all operational, Incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS-20 B (APSS 308).

Providing chain link Mesh;Clearing of site by engaging JCB including fuel and crew charges