Municipal Administration Department Tender

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and laying of 4.0 Sqmm (56/0.3) 2 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells /Polycab / RPG / KEI / Gloster / V-Guard

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Torrent / Universal / Unicab / Polycab / Havells / Gloster / KEI/equivalent.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supplying and ericting of 50 Sq.mm 3 1/2" core PVC armoured UG Cable 1100 V grade with ISI mark following stand/soild aluminium conductor by making trench in soil up to 0.9 m deep embedding the cable complete with sand bed of 20 cm, thick layers and bricks placed on top of the cable width wisew all over the run and backfilling the excavated earth without stones and hard materials and making the surface proper with SWG GI wire including glands, lugs including crimping job to to laid parthly in trench partly in ground with cable indicators at 8 meter interval etc. complete as directed by site in charges for service connections etc complete. (Asian/Universal/Paragon/Finolex / Polycab / powerflex) from feeder pillars to meter box and as per the directions of the Engineer.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and fixing of Automatic Street Light Control System with Optical Sensor, Low volatage / High voltage trip and reset, operating voltage 380 - 450 V AC, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs of Legrand / Schneider / L&T / Siemens of 10KA C/D curve and Contactor suitable to control the load of 5 KW Three phase load with necessary clamping arrangements. Makes : Swadeep Nature Switch / Light Mate / L&T / Siemens / Bajaj.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply of MS Inspection Elbow. 50 mm dia

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and laying of 40mm Nominal Bore medium grade G.I.Pipe including cost and conveyance etc, complete.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and Transportation incluiding Earth work excavation and laying charges of Outer dia 63mm and Inner dia 51mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA LINE (Dura Guard) or its equivalent make.51mm dia DWC pipe

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40 mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc.,

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole isolator as incomer, 6 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and transportation of 90Watts LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Driver surge protection more than 4KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with 5 years warranty. LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / SCHREDER / VIN / HALONIX / HAVELLS / HPL / SURYA / SYSKA. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x 1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including all labour charges and cost and conveyance of materials etc. complete.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Fabrication, Transportation and supply of 1.5mtrs decorative galvanized Single arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet and MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template. Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supplying and fixing of MS Gate using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.00mm MS sheet at bottom 0.30m height and 12mm MS square bars Vertically at 125mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and painting gate with one coat of red oxide primer including cost and conveyance of all materials,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Supply and Fixing in position of steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows etc, including cost and conveyance of all material , labour charges for fabrication and fixing in postion etc,. Complete.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;TBSC-E.I.01: Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Carting of surplus excavated earth /rock/ soil or any debris for a lead of 5kms from the site to suitable place including loading, unloading charges, cost & conveyance, dumping, labour charges, all leads & lifts and other incidental and operational charges etc., complete as directed by the Engineer in Charge.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Saw cut joints for freshly laid concrete pavement including all material and labour charges (Grooves 2-3 mm)

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.7-0.8 atmospheres as per the standard procedure floating with power floater, mechanical trawelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc., complete for finished item of work as directed by Engineer-in-charge of the work.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;RBR-EECD-15: Construction of earthen shoulders with approved material obtained from roadway cutting with all leads and lifts including pre-watering of soil, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (5th revision).

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;RBR-CCPV-5-Construction of M30 grade plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement @ 350 kg per cum or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;RBR-SBBS-11 B: Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;BLD-CSTN- 2-8 modfied in 2021-22 : Filling with HBG stone chips of 2.36mm and below in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Balance work of Dumpyard at Thettekunta (internal Roads, lighting facilities, weigh bridge, window t;RBR-EECD-8(c) : Earthwork excavation for road way in soil by mechanical means including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MORTH specification No.301 and as directed by the Engineer-in-Charge.