Municipal Administration Department Tender

CC Drain;Construction of un-reinforced, un-reinforced, dowel jointed at expansion and construction joint only VCC M30 using, plain cement concrete pavement (Cement, fine aggregate, coarse aggregate) corresponding to table 9 of IS 456 using 20 mm to 10 mm),150mm thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than Concrete mixer 0.28 / 0.4 cum capacity cum capacity and using approved mix design, laid in approved fixed side formwork (steel channel, laying including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

CC Drain;Providing of Gravel l, spreading gravel in uniform layers with consolidating each deposited layer by watering and ramming including cost and conveyance of gravel and water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.

CC Drain;Earthwork in excavation for Drains as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

CC Drain;Supply and filling of stone dust in foundation trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH incudinding labour charges cost and conveyance of all the materials etc., complete for finished item of work.

CC Drain;Plain Cement concrete (1:4:8) using 40 mm metal with with concrete mixture including cost and convence of all the material and labor charges APSS No.420) with minimum cement content as per IS code from standards supplier approved by the deparmtnent including, centering shuttering layng concrete vibrting curing etc.,complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204 MORD and 1500, 1700 & 2200 MORTH.

CC Drain;Plain Cement concrete Grade M15(1:2.5:5) using 20 mm metal with with concrete mixture including cost and convence of all the material and labor charges (APSS No.420) with minimum cement content as per IS code from standards supplier approved by the deparmtnent including, centering shuttering layng concrete vibrting curing etc.,complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204 MORD and 1500, 1700 & 2200 MORTH.

CC Drain;Plain Cement concrete - Nominal Mix (1:2:4) Prop. using 20mm HBG metal in substructure complete as per drawings including cost and conveyance of all materials and labour charges (APSS No.420) with minimum cement content as per IS code from standards supplier approved by the deparmtnent including, centering shuttering layng concrete vibrting curing etc.,complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204 MORD and 1500, 1700 & 2200 MORTH.

CC Drain;Plain Cement concrete - Nominal Mix (1:2:4) Prop. using 20mm HBG metal in substructure complete as per drawings including cost and conveyance of all materials and labour charges (APSS No.420) with minimum cement content as per IS code from standards supplier approved by the deparmtnent including, centering shuttering layng concrete vibrting curing etc.,complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204 MORD and 1500, 1700 & 2200 MORTH.

CC Drain;Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

CC Drain;Providing VRCC M- 30 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work and including centering, shuttering.