Mission Bhagiratha Department Tender

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.

Valves;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and jointing of DI/MS Tee and Isolation Sluice valves along with cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work.