Mission Bhagiratha Department Tender

Water Supply;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for foundations for pedestals on 250mm DI pipeline

Water Supply;Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc., complete.

Water Supply;CC (1:1.5:3) using 20 mm HBG metal icluding Cost and conveyance of the all materials etc complete for anchor blocks on 250mm dia DI pipeline

Water Supply;Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work as per (S.S. No. 402) for anchor blocks on 250mm dia DI pipeline

Water Supply;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for foundations for anchor blocks on 250mm dia DI pipeline

Water Supply;MS Protection Cage of size 1.5*1.5*2.5 to safe guard meter and Battery with locking system

Water Supply;Supply,Installation and commissioning of 300 mw solar pack unit includes Supply and fixing of 12V, 150 AH Tubular Gel VRLA battery-SUNQUALITA including wire leads with 7 years warranty period. Makes : Amar Raja (Power Zone) or Equivalent model of Exide / Panasonic / Gotech/ NED/ Luminious/HBI,Supply and Run of 1 core (4.00 Sq.mm) FRLS / HFFR PVC insulated flexible ISI marked copper cable inlcuding connections and all labour charges etc., complete.,Supply, transportation and fixing of 24V/ 330W Solar Multicrystal solar PV Module Makes: VIKRAM/RENEWSYS/WAREE/Savitr ( MNRE APPROVED) ,Supply, transportation and fixing of Solar module mounting structure for solar PV Panels,Suppl and fixing of MC4 connectors for Solar module panel,Supply and installation of PCU( Power Condition Unit) : 24V/850VA( 600W) Make: Star/Glow Power inlcuding transportation etc., complete.

Water Supply;Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per ENISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make) includes manufacture and supply and delivery of (M.S/C.I) dismantling joints with both sides flange in insta1lation in b/w flage and pipes.Thickness as per IS: 7322 this rates are excludind Escise duty,taxes and transportation charges etc complete,Manufacture and Supply of the following dia Mild Steel pipes using MS plates conforming to IS 2062- 1992 grade A, manufactured as per IS-3589- 2001 in suitable lengths to suit the site conditions, as directed by the departmental officers including testing at factory for a test pressure of 15 Kg/sqcm., including two coats of epoxy painting of approved make including cost of mild steel plates, epoxy paint, welding rods and other required materials and inclusive of all taxes, and duties and delivery of fabricated pipes to site, loading, unloading and hoisting carefully, lowering the pipes in to ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of the jointing materials inclusive of the cost of the necessary testing equipment,DI flanged sockets - 2 Nos, Jointing materials such as MS bolts nuts and rubber washers for dismantling joint including cost of materials (3 joints),Jointing of DI S/S 2 Jobs Labour,Lowering of EMF and keeping in postion,construction of valve chamber includesEarth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion,CC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete ,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for BOTTOM RAFT SLAB,side walls,top slab,Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete.

Water Supply;Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per ENISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make) includes manufacture and supply and delivery of (M.S/C.I) dismantling joints with both sides flange in insta1lation in b/w flage and pipes.Thickness as per IS: 7322 this rates are excludind Escise duty,taxes and transportation charges etc complete,Manufacture and Supply of the following dia Mild Steel pipes using MS plates conforming to IS 2062- 1992 grade A, manufactured as per IS-3589- 2001 in suitable lengths to suit the site conditions, as directed by the departmental officers including testing at factory for a test pressure of 15 Kg/sqcm., including two coats of epoxy painting of approved make including cost of mild steel plates, epoxy paint, welding rods and other required materials and inclusive of all taxes, and duties and delivery of fabricated pipes to site, loading, unloading and hoisting carefully, lowering the pipes in to ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of the jointing materials inclusive of the cost of the necessary testing equipment,DI flanged sockets - 2 Nos, Jointing materials such as MS bolts nuts and rubber washers for dismantling joint including cost of materials (3 joints),Jointing of DI S/S 2 Jobs Labour,Lowering of EMF and keeping in postion,construction of valve chamber includesEarth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion,CC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete ,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for BOTTOM RAFT SLAB,side walls,top slab,Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete.

Water Supply;Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per ENISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make) includes manufacture and supply and delivery of (M.S/C.I) dismantling joints with both sides flange in insta1lation in b/w flage and pipes.Thickness as per IS: 7322 this rates are excludind Escise duty,taxes and transportation charges etc complete,Manufacture and Supply of the following dia Mild Steel pipes using MS plates conforming to IS 2062- 1992 grade A, manufactured as per IS-3589- 2001 in suitable lengths to suit the site conditions, as directed by the departmental officers including testing at factory for a test pressure of 15 Kg/sqcm., including two coats of epoxy painting of approved make including cost of mild steel plates, epoxy paint, welding rods and other required materials and inclusive of all taxes, and duties and delivery of fabricated pipes to site, loading, unloading and hoisting carefully, lowering the pipes in to ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of the jointing materials inclusive of the cost of the necessary testing equipment,DI flanged sockets - 2 Nos, Jointing materials such as MS bolts nuts and rubber washers for dismantling joint including cost of materials (3 joints),Jointing of DI S/S 2 Jobs Labour,Lowering of EMF and keeping in postion,construction of valve chamber includesEarth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion,CC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete ,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for BOTTOM RAFT SLAB,side walls,top slab,Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete.

Water Supply;Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per ENISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make) includes manufacture and supply and delivery of (M.S/C.I) dismantling joints with both sides flange in insta1lation in b/w flage and pipes.Thickness as per IS: 7322 this rates are excludind Escise duty,taxes and transportation charges etc complete,Manufacture and Supply of the following dia Mild Steel pipes using MS plates conforming to IS 2062- 1992 grade A, manufactured as per IS-3589- 2001 in suitable lengths to suit the site conditions, as directed by the departmental officers including testing at factory for a test pressure of 15 Kg/sqcm., including two coats of epoxy painting of approved make including cost of mild steel plates, epoxy paint, welding rods and other required materials and inclusive of all taxes, and duties and delivery of fabricated pipes to site, loading, unloading and hoisting carefully, lowering the pipes in to ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of the jointing materials inclusive of the cost of the necessary testing equipment,DI flanged sockets - 2 Nos, Jointing materials such as MS bolts nuts and rubber washers for dismantling joint including cost of materials (3 joints),Jointing of DI S/S 2 Jobs Labour,Lowering of EMF and keeping in postion,construction of valve chamber includesEarth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion,CC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete ,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for BOTTOM RAFT SLAB,side walls,top slab,Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete.

Water Supply;Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per ENISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make) includes manufacture and supply and delivery of (M.S/C.I) dismantling joints with both sides flange in insta1lation in b/w flage and pipes.Thickness as per IS: 7322 this rates are excludind Escise duty,taxes and transportation charges etc complete,Manufacture and Supply of the following dia Mild Steel pipes using MS plates conforming to IS 2062- 1992 grade A, manufactured as per IS-3589- 2001 in suitable lengths to suit the site conditions, as directed by the departmental officers including testing at factory for a test pressure of 15 Kg/sqcm., including two coats of epoxy painting of approved make including cost of mild steel plates, epoxy paint, welding rods and other required materials and inclusive of all taxes, and duties and delivery of fabricated pipes to site, loading, unloading and hoisting carefully, lowering the pipes in to ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alingment and gradient and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating of field welded joints with cement mortar as per the above specification inclusive of cost of the jointing materials inclusive of the cost of the necessary testing equipment,DI flanged sockets - 2 Nos, Jointing materials such as MS bolts nuts and rubber washers for dismantling joint including cost of materials (3 joints),Jointing of DI S/S 2 Jobs Labour,Lowering of EMF and keeping in postion,construction of valve chamber includesEarth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion,CC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour charges etc complete ,RCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges but excluding cost and fabrication charges of steel for reinforcement for BOTTOM RAFT SLAB,side walls,top slab,Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete.

Water Supply;Scour valve 150mm dia on 250mm dia line 'Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage,dismantling joint to suit the pressure class of pipe, including cost of joint materials such as rubber gaskets MS Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work the rate is including all taxes. The work shall be executed based on the approved designs and drawings of the department.. The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Sluice valve 100mm dia on 100mm dia line 'Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage,dismantling joint to suit the pressure class of pipe, including cost of joint materials such as rubber gaskets ,MS Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work the rate is including all taxes. The work shall be executed based on the approved designs and drawings of the department.. The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Sluice valve 150mm dia on 150mm dia line'Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage,dismantling joint to suit the pressure class of pipe, including cost of joint materials such as rubber gaskets, MS Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work the rate is including all taxes. The work shall be executed based on the approved designs and drawings of the department.. The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Sluice valve 200mm dia on 200mm dia line lin 'Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage,dismantling joint to suit the pressure class of pipe, including cost of joint materials such as rubber gaskets MS Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work the rate is including all taxes. The work shall be executed based on the approved designs and drawings of the department.. The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Sluice valve 250mm dia on 250mm dia line 'Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage,dismantling joint to suit the pressure class of pipe, including cost of joint materials such as rubber gaskets ,MS Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work the rate is including all taxes. The work shall be executed based on the approved designs and drawings of the department.. The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Air valve 50mm dia on 100mm dia line -Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage ,including DI Air Tee D/S branch flanged, Vertical Stem Pipe, Jointing materials such as MS bolts nuts and rubber vouchers for Air valve fixing ,Labour charges for S/S jointing including cost of rubber gaskets ,lowering of tee ,airvalve fixing and construction of RCC (1:1.5:3) Footing + Stem Column . The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Air valve 50mm dia on 150mm dia line -Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage ,including DI Air Tee D/S branch flanged, Vertical Stem Pipe, Jointing materials such as MS bolts nuts and rubber vouchers for Air valve fixing ,Labour charges for S/S jointing including cost of rubber gaskets ,lowering of tee ,airvalve fixing and construction of RCC (1:1.5:3) Footing + Stem Column . The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Air valve 50mm dia on 200mm dia line -Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage ,including DI Air Tee D/S branch flanged, Vertical Stem Pipe, Jointing materials such as MS bolts nuts and rubber vouchers for Air valve fixing ,Labour charges for S/S jointing including cost of rubber gaskets ,lowering of tee ,airvalve fixing and construction of RCC (1:1.5:3) Footing + Stem Column . The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Air valve 80mm dia on 250mm dia line -Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage ,including DI Air Tee D/S branch flanged, Vertical Stem Pipe, Jointing materials such as MS bolts nuts and rubber vouchers for Air valve fixing ,Labour charges for S/S jointing including cost of rubber gaskets ,lowering of tee ,airvalve fixing and construction of RCC (1:1.5:3) Footing + Stem Column . The rates are inclusive of cost and conveyance of all materials and labour charges Excluding all Taxes.

Water Supply;Manufacture, supply, delivery, of M.S Pipes of 250 mm dia, 8mm thick conforming to IS 3589/2001 including in lining with epoxy and outcoating with coal tar including cost of all materials, labour charges, transportation ,Earth work excavation of trench in all types of soils, except rock requiring blasting, using machinery, lowering, laying and jointing of pipe lines true to alignment and gradient, and refilling trenches with excavated earth(other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work , including Hydrostatic Filed Test Pressure, Cost of Site Welding, Jointing Materials, Transportation of Water, Emptying Pipe Line after Completion Of Field Testing etc completely, the rate is excluding all taxes . The work shall be executed based on the approved designs and drawings of the department and trench size as per the pipe line data.

Water Supply;Manufacture, supply, delivery, of M.S Pipes of 250 mm dia, 8mm thick conforming to IS 3589/2001 including in lining with epoxy and outcoating with coal tar including cost of all materials, labour charges, transportation ,Earth work excavation of trench in all types of soils, except rock requiring blasting, using machinery, lowering, laying and jointing of pipe lines true to alignment and gradient, and refilling trenches with excavated earth(other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work , including Hydrostatic Filed Test Pressure, Cost of Site Welding, Jointing Materials, Transportation of Water, Emptying Pipe Line after Completion Of Field Testing etc completely, the rate is excluding all taxes . The work shall be executed based on the approved designs and drawings of the department and trench size as per the pipe line data.

Water Supply;Construction of pipelines for water supply with DI - K7 centrifugally cast (spun) Ductile Iron S/S pipes of 100mm dia with cement mortar lining inside the pipe as per IS 8329:2000 with its amendments and revisions thereon and with rubber gaskets as per IS:4179, including supply of pipes and rubber gaskets, Tyton joints as per IS:13382-1992 and DI specials as per site requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including all taxes .The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with DI - K7 centrifugally cast (spun) Ductile Iron S/S pipes of 150mm dia with cement mortar lining inside the pipe as per IS 8329:2000 with its amendments and revisions thereon and with rubber gaskets as per IS:4179, including supply of pipes and rubber gaskets, Tyton joints as per IS:13382-1992 and DI specials as per site requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including all taxes .The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with DI - K7 centrifugally cast (spun) Ductile Iron S/S pipes of 200mm dia with cement mortar lining inside the pipe as per IS 8329:2000 with its amendments and revisions thereon and with rubber gaskets as per IS:4179, including supply of pipes and rubber gaskets, Tyton joints as per IS:13382-1992 and DI specials as per site requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including all taxes .The work shall be executed based on the approved designs and drawings of the department.

Water Supply;Construction of pipelines for water supply with DI - K7 centrifugally cast (spun) Ductile Iron S/S pipes of 250mm dia with cement mortar lining inside the pipe as per IS 8329:2000 with its amendments and revisions thereon and with rubber gaskets as per IS:4179, including supply of pipes and rubber gaskets, Tyton joints as per IS:13382-1992 and DI specials as per site requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including all taxes .The work shall be executed based on the approved designs and drawings of the department.