Mission Bhagiratha Department Tender

Kondareddipally INTRA;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements complete etc. for finished item of work and contractor profit & over heads @ 13.615 % but excluding GST for 200mm valve PN 16 on 225mm HDPE Pipeline.

Kondareddipally INTRA;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements complete etc. for finished item of work and contractor profit & over heads @ 13.615 % but excluding GST for 200mm valve PN 16 on 200mm HDPE Pipeline

Kondareddipally INTRA;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements complete etc. for finished item of work and contractor profit & over heads @ 13.615 % but excluding GST for 150mm valve PN 16 on 160mm HDPE Pipeline .

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 225x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc.and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 180x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc.and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 160x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc.and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 140x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe linecomplete etc. and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 125x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc.and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 110x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc. and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 90x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc.and contractor profit and over heads @ 13.615 % etc complete as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Providing 15mm dia House Service Connection of size 75x1/2" as per standard specification for including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows , MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve as per SSR specification including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line complete etc.and contractor profit and over heads @ 13.615 % etc complete and as directed by departmental officer for finished item of work ( As per SSR 2024-25 )

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 250 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated arth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. contractor profit and over heads @ 13.615 %for finished item of pipeline work , but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 225 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. contractor profit and over heads @ 13.615 % for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 200 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. contractor profit and over heads @ 13.615 % for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 180 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc.contractor profit and over heads @ 13.615 % for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 160 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc.contractor profit and over heads @ 13.615 %for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 140 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. contractor profit and over heads @ 13.615 % for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 125 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges contractor profit and over heads @ 13.615 %for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 110 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. contractor profit and over heads @ 13.615 % for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 90 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. contractor profit and over heads @ 13.615 %for finished item of pipeline work, but excluding GST .

Kondareddipally INTRA;Construction of pipelines for water supply with HDPE PE-100 grade 75 mm dia 6kg/cm2 pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 1/3rd and manual rate for 2/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials , labour charges, all incidental and operational charges complete etc. , contractor profit and over heads @ 13.615 %for finished item of pipeline work, but excluding GST .