Mission Bhagiratha Department Tender

Pipe Line Replacement works;Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc. complete. (1.88Kgs/1Mtr)

Pipe Line Replacement works;Earthing: Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).

Pipe Line Replacement works;Cables: Supply and run of 35Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work.

Pipe Line Replacement works;Cables: Supply and run of 3 core 6 sqmm round sheathed round copper cable of Finolex/RR cable/havells/Nakoda with all necessary required materials etc including making end terminations for motor pump set.

Pipe Line Replacement works;Manufacture supply laying testing Commissioning of Delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers etc. complete including providing applying of epoxy coating. Wall Thickness :- 6mm - 25mm dia MS pipes - Airvalve

Pipe Line Replacement works;Manufacture supply laying testing Commissioning of Delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers etc. complete including providing applying of epoxy coating. Wall Thickness :- 6mm - 50mm dia MS pipes - Delivery

Pipe Line Replacement works;Manufacture supply laying testing Commissioning of Delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers etc. complete including providing applying of epoxy coating. Wall Thickness :- 6mm - 63mm dia MS pipes - Pressure main

Pipe Line Replacement works;Manufacture supply laying testing Commissioning of Delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers etc. complete including providing applying of epoxy coating. Wall Thickness :- 6mm - 100mm dia MS pipes - Manifold

Pipe Line Replacement works;Manufacture, Supply, Delivery and fixing of 50mm dia C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes of delivery pipe.

Pipe Line Replacement works;Manufacture, Supply,delivery,laying and Jointing of 25mm dia Single Chamber CS Air Valve with Body and cover in Ductile Iron of grade SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve, PN-16Grade and with isolated DI Sluice Valve of PN-25, DI Specials to suit the pressure class of pipe, Valve should be electrostatically powder coated from inside & outside.

Pipe Line Replacement works;Manufacture, Supply and delivery of DI DF dia Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40 SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89IS14846-2000DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. - 25mm dia Sluice valve - for Isolation of Air valve

Pipe Line Replacement works;Manufacture, Supply and delivery of DI DF dia Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40 SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89IS14846-2000DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. - 50mm dia Sluice valve - Delivery

Pipe Line Replacement works;Manufacture, Supply and delivery of DI DF dia Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40 SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89IS14846-2000DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. - 80mm dia Sluice valve - Pressure main

Pipe Line Replacement works;Pumps for Tilak Nagar at 4th Incline IPS - Manufacturesupply delivery erection testing and commissioning of 50mm dia. Non - Return valves/Check Valve PN-16 rated confirming to API 594/6D and epoxy coated to AWWA C 210.

Pipe Line Replacement works;Pumps for Tilak Nagar at 4th Incline IPS - Supply, delivery ,transporation, errection, testing and commisioning of open well submersible motor pump set of Kirlosker/Crompton /Texmo/CRI/KSB/AQUA make with water resistant dynamically balanced impeller with stainless steel sleeves pump coupling and pivot with squirrel cage inductor motor of 3phase 415V 50HZ AC supply heavy copper windings with with water proof insulation and high pressure strength not to be efected by chemicals in water with suitable bronze bearings errected with h-type clamps odutable size and strength including cost of all materilas, transportation and all labour chrages as per the directions of the Engineer-in-charge. 7.5HP

Pipe Line Replacement works;Pedastals and Road restoration - VRCC (1:1.5:3) using 20 mm HBG crushed metal including cost and conveyence of all materials and labour charges but excluding cost of steel and its fabrication charges etc., complete as per standard specifications for

Pipe Line Replacement works;Cutting open C.C road surface, cutting road surface including stacking of excavated materials for pipeline trench work including labour charges, machinery etc.

Pipe Line Replacement works;Cutting open B.T road surface cutting road surface including stacking of excavated materials for pipeline trench work including labour charges, machinery etc.

Pipe Line Replacement works;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) (for Scour Valve) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of scour Tee of S/S and flanged Tee to suit the main pipeline including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements, etc.complete for finished item of work - 80mm scour valve on 100mm dia DI K9

Pipe Line Replacement works;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 50mm dia 2.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work. - 50mm Airvalve on 100mm DI K9

Pipe Line Replacement works;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 50mm dia 2.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work. - 50mm Airvalve on 75mm dia HDPE pipeline

Pipe Line Replacement works;(Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work - 80mm Sluic valve on63mm dia HDPE pipeline

Pipe Line Replacement works;Construction of pipe line including manufacture, supply and delivery of HDPE PE-100 grade pipe line per IS:4984/1988 with its amendments and revisions and as shown in the drawing (Part C of Vol - I) and technical specifications(Part B of Vol - I) including supply of pipes, trench excavation by machinery and preparing the bed surface to the gradient by manual for pipe lines in all soils except rock, lowering, laying and jointing of pipes, Specials,valves true to alignment and gradient, asper approved LS drawing, refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete as specified. The rates are inclusive of Cost of pipes, specials, Lowering , laying and testing and ,labour charges for finished pipeline work but excluding CED and other taxes,cost of vales, Anchor/thrust blocks. And Execution as per approved designs and LS drawings to suit the feild requirement complete and surge. - 75 mm dia HDPE 10 Kg/cm2 pipeline

Pipe Line Replacement works;Construction of pipe line including manufacture, supply and delivery of HDPE PE-100 grade pipe line per IS:4984/1988 with its amendments and revisions and as shown in the drawing (Part C of Vol - I) and technical specifications(Part B of Vol - I) including supply of pipes, trench excavation by machinery and preparing the bed surface to the gradient by manual for pipe lines in all soils except rock, lowering, laying and jointing of pipes, Specials,valves true to alignment and gradient, asper approved LS drawing, refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete as specified. The rates are inclusive of Cost of pipes, specials, Lowering , laying and testing and ,labour charges for finished pipeline work but excluding CED and other taxes,cost of vales, Anchor/thrust blocks. And Execution as per approved designs and LS drawings to suit the feild requirement complete and surge. - 63 mm dia HDPE 8 Kg/cm2 pipeline

Pipe Line Replacement works;Manufacturing and supply of DI pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes with cement mortar lining inside the pipe as per IS 4179/1989 with its amendments and revisions thereon and with rubber gaskets as per IS:8329-2000, including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992 and jiffy joints, specials, Valves with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient as per approved LS drawing, trench excavation (Earthwork excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete., The rates are inclusive of cost and conveyance of all materials of pipes and specials and labour charges for finished item of pipeline work, but excluding CED and other taxes,cost of Valves,surge protection devices,anchoer/thrust blocks.Execution as per approved designs and L-section drawings to suit the feild requirement complete and for Surge. 100 mm dia DI K9