Mission Bhagiratha Department Tender

NA;Supply and delivery erection of 450mm to 300 mmMS EXPANDERS for Pump delivery side for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Supply and delivery erection of 300mm to 200 mm MS REDUCERS for Pump delivery side for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Supply and delivery erection of 150mm to 200 mm MS EXPANDERS for Pump delivery side for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Supply and delivery erection of 200mm MS Flanges for MS Pipe fitting in Pressure main side as per IS 1538,for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Supply and delivery erection of 300mm dia MS Flanges for MS Pipe fitting in Delivery side as per IS 1538, for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Providing Supplying Erecting commissioning & testing of Pressure gauge with below mentioned specifications. Accuracy ±1% As per IS 3624 Dial size 150mm Window starter proof glass Element connection Argon welded Range As required in the line Sensing element Diaphragm SS316 BourdonBlock SS316 Movement SS304 Mounting Bottom Case SS304 Beyonet type bezel Sealing fluid silicon oil for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Providing Supplying Erecting commissioning & testing Ultrasonic pressure transmitter for water application : Range: 0-10 bar/power supply :24 v DC / Outtput: 4-20mA with HART / Diapharagm: SS316L / Process Connection : 1/2 "NPT (M) / Accuracy: 0.15% Protection :IP67, including LCD Display and configurable to any level and warranty for 5 years. The rates excluding GST

NA;Providing Supplying Erecting commissioning & testing Ultrasonic level transmitter for water application : principle: time of flight / Sensor MOC PP/ Process connection 1 1/2 inch BSP threaded type / Power supply: 24v DC / Out put:4-20MA / Display: Integral Display for programming and Display reading /IP66. Ranging from 0-5 mts, including LCD Display and configurable to any level and warranty for 5 years. The rates excluding GST

NA;Instrumentation Providing Supplying Erecting commissioning & testing and trail of Ultrasonic flow meter Clamp on type.Flow meter working conditions & specifications, calibration, inspection, testing, training, gurantees and manufactures test certificate/declaration copy along with accessories., complete for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;SLUICE VALVES Manufacture Supply and delivery of 100 mm dia DI D/F Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS 1538. for finished item of work as directed by the Engineer-In-Charge.Excluding GST

NA;Manufacture Supplydeliverylaying and Jointing of 100 mm dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve PN-16 Grade and with isolated DI Sluice Valve of PN-16 DI Specials to suit the pressure class of pipe Valve should be electrostatically powder coated from inside outside for finished item of work as directed by the Engineer-In-Charge.EXcluding GST

NA;Manufacture,Supply,erection, testing and joining at site of works and testing of MS manfold of 800 mm dia- 10 mm thick . including jointing of individual pump riser to common header complete conforming to detailed specificationincluding providing applying of epoxy coating ( 2 coat) as per the drawing Including connection between existing of 250 mm dia for finished item of work as directed by the Engineer-In-Charge. EXcluding GST

NA;ManufactureSupplyerection testing and joining at site of works and testing of MS pipe of 300 mm dia- 8mm thick . including jointing of individual pump riser to common header complete conforming to detailed specificationincluding providing applying of epoxy coating ( 2 coat) as per the drawing Including connection between existing of 250 mm dia for finished item of work as directed by the Engineer-In-Charge. EXcluding GST

NA;ManufactureSupplyerection testing and joining at site of works and testing of MS pipe of 200 mm dia- 8mm thick. including jointing of individual pump riser to common header complete conforming to detailed specificationincluding providing applying of epoxy coating ( 2 coat) as per the drawing Including connection between existing of 250 mm dia for finished item of work as directed by the Engineer-In-Charge. Wall Thickness :- 8 mm

NA;ManufactureSupplyerection testing and joining at site of works and testing of MS pipe of 400 mm dia- 10 mm thick . including jointing of individual pump riser to common header complete conforming to detailed specificationincluding providing applying of epoxy coating ( 2 coat) as per the drawing Including connection between existing of 250 mm dia for finished item of work as directed by the Engineer-In-Charge. Wall Thickness :-10mm

NA;ManufactureSupply and Delivery erection testing and commissioning of 350 mm dia MS Dismantling Joints of following sizes with both side flange end suitable for installation in between flanged end pipes. Thickness as per IS: 7322 of pressure rating 16 Kg/cm2 for finished item of work as directed by the Engineer-In-Charge. for 350 mm Dia

NA;Manufacture Supply and delivery of 300 mm dia DI D/F Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. for 300 mm dia.

NA;Manufacturesupply delivery erection testing and commissioning of 300 mm dia. Dual plate DI check valves PN-16 rated confirming to API 594/6D and epoxy coated to AWWA C 210 specification for finished item of work as directed by the Engineer-In-Charge.

NA;Design Manufacture supply Installing testing commissoning of vertical turbine pumps of suitable rpm for following duty points as specified below conforming to IS: 6595-1 a) Duty point discharge4000 LPM b) Duty point head: suitable to provide combined discharge at rated head as mentioned below. c) These pumps should be suitable for parallel operation to deliver the required combined flow of 4000 LPM for 22 Hrs/Day continuous operation by running 1 pumps with 1 standby pump at Combined Duty point head 75 m and as per relevant specifications for clear water application.Design Manufacture supply erection testing and commissioning of 0.415 kv 3 Phase 50 Hz Horizontal squirrel cage induction motor suitable to the above pump. The motor shall be conforming to IS:325 IP-55 Class of protection TEFC/CACA type of enclosure Class -F insulation with a temperature rise limited to Class-B and as per the standard specifications.The Motors efficiecny shall not be less than 90% & Pump efficiency shall be as per HIS Curves. motor rating is 55kw. Complete , Excluding GST

NA;Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete. Excluding GSt

NA;Shock instrution chart in English Hindi Telugu duly framed with front glass Complete, Excluding GSt

NA;Supply and fixing of PVC synthetic elastomer electrically insulated mat with Class B insulation conforming to IS: 15652-2006 With 2.5mm thickness upto 11kv Complete, Excluding GSt

NA;Supply anmd fixing of Fire bucket stand fabricated by M.S. angles to install for two numbers of buckets as per local fire officers standards. Complete, Excluding GSt

NA;Supply of round bottom G.I sheet bucket of 9 Ltrs. Capacity as per IS:2546 made out of 24 gauge GI sheet with extra handle at bottom duly painted inside and red out side with printed with FIRE Mark for stand and hook and filled with sand and arranged to existing stand or hook. Complete, Excluding GSt

NA;Danger Notice Plates of size 250x200mm, shall comply with IS:2551-1982. Complete, Excluding GSt

NA;11/22KV Hand gloves.Complete, Excluding GSt

NA;First Aid box 18" x 12" x 8" . Complete, Excluding GSt

NA;Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted MV panel made out of No.14/16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN with suitable bus bars (with rating of 0.8A/ Sqmm) supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves. The metering shall be provided as specified. The panel shall have short-circuit with standing capacities of minimum 50KA and consists of switchgear as mentioned below.The panel shall be got manufactured from the manufacturers of CPRI test certificate only. The panel shall be mounting on U channels including supply and fixing including painting with powder coating including internal connections cost and conveyance of all materials labour charges. Supply and erection of Digital frequency meter on existing box / panel board including connections etc. comSupply and erection of Digital power factor meter 3 phase 4 wire balanced or unabalanced load 5A 415V of size 96x96mm on existing box / panel board including connections etc. complete.Supply and erection of L.T. 3phase Digital multifunction energy meter with 3 lines LCD display for measuring all the parameters (voltage / Current / Power / frequency / power factor / kw / kwh / KVAR/ KVARH/) on existing box panel board including connections etc. complete.Supply and fixing of 8 Stage APFC Relay with connection etc complete. Supply of 400A 4 Pole MCCB / Confirms to IS/IEC 60947-2 having Breaking Capacity 50 KA with thermal magnetic release Panel Mounted.-1NoSupply of 250A 3 Pole MCCB Adjustable Confirms to IS/IEC 60947-2 having Breaking Capacity 36/35 KA with thermal magnetic release Panel Mounted-4Nos.Supply of 63A / 60A 3 Pole MCCBSupply and erection of 0-100 / 200 / 400 / 600 /1000 Analog Ammeter of size 96x96mm on existing box / panel board including connections etc. complete. Adjustable Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted-2Nos Supply of 125A 3 Pole MCCB Adjustable Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-2Nos Supply and erection of selector switch for voltmeter / Ammeter on the existing box / panel including connections etc. complete. Supply and erection of LED indicator lamps on the existing box / panel board.Supply and erection of LT current transformer with bar primary 100/5A to 1000 / 5A ratio in the existing box / panel including connections etc. complete. Supply and fixing of three phase Electronic energy Meter 415V AC50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc. complete on the existing boardFabrication and tarnsportation of panel with No.14/16 guage CRCA sheet after 7 tank process including compartments and suitable for fixing above switch gears Bus bars and metering equipment as per CPRI test certificate etc. complete. Supply and fixing of 80 KVAR multi stage Capacitor bank with connection etc complete. Erection of Panel board with C.C bed on suitable angle iron base frame etc. complete. EXcluding GST

NA;Supply and Installation of 150mm x 50mm x 2mm thick GI Ladder type cable tray along with required angle supports with coupler plates Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.(-4.6.6) Excluding GSt

NA;Supply and Installation of 300mm x 50mm x 2mm thick GI Ladder perforated cable tray along with required angle supports with coupler plates Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete.(-4.6.6) Excluding GSt

NA;Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (2.36Kgs/1Mtr)(Data No.) complete for finished item of work.Excluding GSt

NA;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).complete for finished item of work.Excluding GSt

NA;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Important equipment with 2.5Mtr length 100mm dia 'B' class CI pipe and 18" dia 3" thick hume pipe ring with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length to be bolted with nut bolts including supply and termination of No.8 G.I.wire from bottm of the pipe with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II) complete for finished item of work.Excluding GSt

NA;Supply of run of -------4c x 50 sqm PVC/XLPE insulated, 1100v insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables with ISI mark as per specification confirming to IS 694:1990 (Part - I) Makes :RK cable/SPM/Sudhakar/Polycab / Havells / Gloster / KEI / Finolex etc., complete for finished item of work.Excluding GSt

NA;Supply and Erection of VT Pumpset at Borancha Inatake Well Supply and run of of 240 Sqmm 3.5 Core XLPE insulated 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)in exsting trench/wall including providing end terimations with glands. lugs crimping job etc complete for finished item of work.Excluding GSt

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Narayankhed constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be deployed as per cluase no 6.9 of Vol-I -PART Kangti (Gudur) 4MLD ( to Supply 1210.55 KL per day)

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Narayankhed constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be deployed as per cluase no 6.9 of Vol-I -PART Shankarampet 5 MLD ( to Supply 3684.56 KL per day)

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Narayankhed constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be deployed as per cluase no 6.9 of Vol-I -PART Shankarampet 2.5 MLD ( to Supply 1284.91 KL per day)

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Narayankhed constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be Deployed as per cluase no 6.9 of Vol-I -PART NKD PH-II 12.5 MLD ( to Supply 12314.06 KL per day)

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Narayankhed constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be deployed as per cluase no 6.9 of Vol-I -PART Narayankhed Ph-I 5 MLD ( to Supply 3577.09 KL per day)