Mission Bhagiratha Department Tender

Bulk water connection to 2BHK housing colony at Gagillapur, Medchal Malkajgiri District;Supply, installation and field testing of Horizontal Woltman type hermetically sealed type water meters with IP 68 protection (PN-10/ PN-16). The meters shall be manufactured as per ISO 4064 - 1:1993 with MID marking. The meter must have passed life cycle/Endurance test from FCRI.The module should be batteryoperated by inbuilt. The data logger shall be capable of transmitting data on daily bases to central server through GSM/GPRS. The AMR data hourly shall be collected by MIU and stored. The MIU shall be connected to Data logger. The data logger should have inbuilt battery.The AMR meter should be capable of providing data like reverse flow, tampering, daily flow rate distribution. The System shall send alerts for blocked meter, flow rate above limit, pressure below or above limits, back flow detection. The meters shall be installed with CI strainers. The AMR meter and battery shall carry warranty of atleast 5 years from the date of delivery/date of installation which ever is earlier. The data shall be accessable n web server as required by the Client. Excluding all Taxes.200 mm dia Electro Magnetic Flow Meter on 200 mm dia pipe

Bulk water connection to 2BHK housing colony at Gagillapur, Medchal Malkajgiri District;Construction of Scour valve " Supply delivery and fixing of DI D/F Scour Valves arrangement on DI pipeline with Di D/F Butterfly Valves as perIS14846-2000. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. Sluice valves conforming to IS 14846/2000 with amendments No. 1&2 heavy duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal surface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostatic test requirement. The operation can be done with hand wheel/cap. ISI Marked.,dismantling joint to suit the pressure class of pipe, construction of RCC(1:1.5:3) valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, Excluding all Taxes.150mm dia DI Scour Valve on 200mm dia pipeline

Bulk water connection to 2BHK housing colony at Gagillapur, Medchal Malkajgiri District;Construction of SLuice valve "Supply, Delivery and Fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS516389/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. Sluice valves conforming to IS 14846/2000 with amendments No. 1&2 heavy duty with CI grade FG 260 as per IS: 210. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal surface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostatic test requirement. The operation can be done with hand wheel/cap. ISI Marked.,dismantling joint to suit the pressure class of pipe, construction of RCC(1:1.5:3) valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but Excluding all Taxes. 200mm dia DI Gate Valve on 200mm dia DI K7 line