Mission Bhagiratha Department Tender

water supply;Supply of 3 Core 4 sqmm Flat Copper cable of ISI for Submersible Motors Makes : Finolex / RR Kabel / Havells / KEI / L&T including contractor profit and excluding taxes

water supply;S& F 50 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete Including contractor profit and excluding taxes.

water supply;Supply and Transportation of control panel for three phase submersible motors above 5 HP up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete including contractor profit and excluding all taxes

water supply;Supply and Transportation of star rated 7.50 HP 5-10 Stage Three phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi / Falcon including contractor profit and excluding taxes

water supply;Geologist Charges including contractor profit excluding taxes

water supply;Supply and erection of PVC casing pipe of diameter 180mm and 6kg/cm2 pressure excluding all taxes

water supply;Drilling of165mm (61/2") dia borewell by down the hole hammer drilling in all types of rock formation i.e hard rock , secondary rocks, soft formation to a depth as recommended by the Geologist of the department and drilling in overburden to suit insertion of 180mm OD PVC Casing pipe of 63 kg/cm2 ISI brand PVC pipes confirming to relevant IS specification for PVC pipes including cost of insertion casing pipe and any other relevant material required up to the depth as directed by department including cost of transportation of rigs and supporting vehicles and measuring discharge using V notch, collection of rock samples at every 9.14m or change in formation crew charges , fixing well cap, flushing charges , cost of consumables and all other charges including fixing of well cap required complete but excluding cost of pVC casing pipe. The entire work has to be done to the satisfaction of departmental authorities excluding all taxes

water supply;Providing 15mm dia House Service Connection as per standard specifications including the cost of materials like PP Clamp Saddle shall comply with AS/NZS 4793 or relevant international standards-Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt-washer. Maximum working pressure rating of 10 bar., Supply of 20mm x ½? PPR Female Threaded Adaptor conforming to DIN Standards 8077/8092,Supply of tamper proof house hold non return cum flow control valve (with all three parts made by using sold steel bars of SS316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.5 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEEO manual) including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation but excluding GST.,Manufacture, Supply & Delivery of MDPE pipe conforming to ISO 4427 Part-2 (or any equivalent Bureau of Indian Standards code) of PE-80 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation to any where in Telangana but excluding GST.,S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 (TBSP- F.1-01),S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete. (TBSP-GI-07),Labour charges for fitting and testing - Earth work excavation & refilling for trench of size 0.9 x 0.9x0.9m,Excavation, refilling of pipe line trench, etc., all charges for laying of MDPE pipe lines etc., including contractors profit, exluding all taxes etc complete

water supply;Providing 15mm dia House Service Connection as per standard specifications including the cost of materials like PP Clamp Saddle shall comply with AS/NZS 4793 or relevant international standards-Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt-washer. Maximum working pressure rating of 10 bar., Supply of 20mm x ½? PPR Female Threaded Adaptor conforming to DIN Standards 8077/8092,Supply of tamper proof house hold non return cum flow control valve (with all three parts made by using sold steel bars of SS316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.5 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEEO manual) including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation but excluding GST.,Manufacture, Supply & Delivery of MDPE pipe conforming to ISO 4427 Part-2 (or any equivalent Bureau of Indian Standards code) of PE-80 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation to any where in Telangana but excluding GST.,S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 (TBSP- F.1-01),S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete. (TBSP-GI-07),Labour charges for fitting and testing - Earth work excavation & refilling for trench of size 0.9 x 0.9x0.9m,Excavation, refilling of pipe line trench, etc., all charges for laying of MDPE pipe lines etc., including contractors profit, exluding all taxes etc complete

water supply;Sluice valve 150mm dia on 160mm dia line -Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Cost of 0.6m CI D/F pipes 2nos,HDPE Tial pieces 2 nos, MS flanges 2nos,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nosLabour charges for lowering CI/DI pipes,Lowering of valve and keeping in postion,conveyance charges of all materials ,including construction of valve chamber size 0.9m*0.9m*0.9m, contractor profit and excluding all taxes.

water supply;Sluice valve 125mm dia on 125mm dia line -Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Cost of 0.6m CI D/F pipes 2nos,HDPE Tial pieces 2 nos, MS flanges 2nos,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nosLabour charges for lowering CI/DI pipes,Lowering of valve and keeping in postion,conveyance charges of all materials ,including construction of valve chamber size 0.9m*0.9m*0.9m, contractor profit and excluding all taxes.

water supply;Sluice valve 100mm dia on 110mm dia line -Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Cost of 0.6m CI D/F pipes 2nos,HDPE Tial pieces 2 nos, MS flanges 2nos,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nosLabour charges for lowering CI/DI pipes,Lowering of valve and keeping in postion,conveyance charges of all materials ,including construction of valve chamber size 0.9m*0.9m*0.9m, contractor profit and excluding all taxes.

water supply;Sluice valve 80mm dia on 90mm dia line -Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Cost of 0.6m CI D/F pipes 2nos,HDPE Tial pieces 2 nos, MS flanges 2nos,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nosLabour charges for lowering CI/DI pipes,Lowering of valve and keeping in postion,conveyance charges of all materials ,including construction of valve chamber size 0.9m*0.9m*0.9m, contractor profit and excluding all taxes.

water supply;Sluice valve 80mm dia on 75mm dia line -Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Cost of 0.6m CI D/F pipes 2nos,HDPE Tial pieces 2 nos, MS flanges 2nos,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nosLabour charges for lowering CI/DI pipes,Lowering of valve and keeping in postion,conveyance charges of all materials ,including construction of valve chamber size 0.9m*0.9m*0.9m, contractor profit and excluding all taxes.

water supply;Sluice valve 80mm dia on 63mm dia line -Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Cost of 0.6m CI D/F pipes 2nos,HDPE Tial pieces 2 nos, MS flanges 2nos,Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nosLabour charges for lowering CI/DI pipes,Lowering of valve and keeping in postion,conveyance charges of all materials ,including construction of valve chamber size 0.9m*0.9m*0.9m, contractor profit and excluding all taxes.

water supply;Supply and delivery and Fixing of single Chamber DI Air Valve of 50mm dia on 90mm dia line with body and cover In Ductile Iron of grade SG 400/12 or equivalent grade as per I.S. 3896 -part 2 -1985 and Subsequent revisions. All internal Parts such as float,shell etc., all cover bolts, of stainless steel, and gaskets and seals of EPDM food grade quality Epoxy powder cutting (EP -P) inside and outside colour blue. Drilled as per IS: 1538.with isolation valve on pipe line including supply of Air valve ,C I Specials to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges, contractor profit and Excluding all Taxes.

water supply;Construction of pipelines for water supply with with 160mm HDPE 6 Kg/cm2 as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including contractor profit and excluding all taxes .The work shall be executed based on the approved designs and drawings of the department.

water supply;Construction of pipelines for water supply with with 110mm HDPE 6 Kg/cm2 as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including contractor profit and excluding all taxes .The work shall be executed based on the approved designs and drawings of the department.

water supply;Construction of pipelines for water supply with with 90mm HDPE 6 Kg/cm2 as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including contractor profit and excluding all taxes .The work shall be executed based on the approved designs and drawings of the department.

water supply;Construction of pipelines for water supply with with 75 mm HDPE 6 Kg/cm2 as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including contractor profit and excluding all taxes .The work shall be executed based on the approved designs and drawings of the department.

water supply;Construction of pipelines for water supply with with 63 mm HDPE 6 Kg/cm2 as per IS:4984/1988,with its amendments and revisons thereon including supplying of pipes, specials as per as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work the rate is including contractor profit and excluding all taxes .The work shall be executed based on the approved designs and drawings of the department.

water supply;Construction of 100KL OHSRs with a staging of 12 m for Zone-II Seismic and excluding Seigniorage charges. All VRCC minimum of M30 grade design mix 2)The rate arrived for OHSR with Raft Foundation and a rate of Rs.5200/- per tonne for Cement and Rs.57000/- per tonne for Steel as per August 2023 rates. The price adjustment shall be adopted on the actual consumption of Steel and Cement as per agreement conditions. Rate inclusive of three coats of food grade epoxy paint to inner surface of the reservoir including roof dome. The rate arrived for construction of ELSR for a finished work including 2 coats of weather proof emulsion painting for external surfaces over one coat of primer of approved make, lettering, all required fixtures, pipes, bends, valves etc., for pipe connections along with the cost of pipes, bends and valves including the valve chamber of size 0.9mx0.9mx0.9m for 100mm , and 150mm dia sluice valves as per departmental designs and drawings. The above rates are applicable for wind pressures upto 90 kg / sq m. a) The above rates are applied upto Zone-II earth quake. Fixtures include : a) RCC or Aluminium ladder inside 0.60 m wide . b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity Dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20m. S.S railing to stair case upto 1.2m height. c) Lightning arrestor, including conductor and earthing etc with relevant IS codes. d) RCC ventilators with copper or stainless Steel fly proof mesh e) D.I Manholes frame and cover 0.60x0.60 m as per IS specifications (light duty) - 2 Nos. f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No h) The increase in staging shall be at 1.0mt interval.j)The dog legged staircase shall be enclosed with brick/CRS wall on three sides and front side with PVC door of standard make up to 1st brace level from ground level to prevent unauthorized entry.l) The above rates including labour charges for hoisting, jointing of CI verticals with rubber insertion, nuts and bolts. All valves near inlet, outlet and for scour of ELSRs shall be D.I valves. Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of gradeGGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2- 1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.'Cost of 0.6m DI D/F pipes 2nos HDPE Tial pieces 2 nos ,MS flanges 2nos, 'Jointing materials such as bolts nuts and rubber vouchers including material cost for main line - 2nos, Labour charges for lowering CI/DI pipes (2 jobs), Lowering of valve and keeping in postion,Cost of RCC valve chamber includingEarth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for foundation,PCC(1:4:8)mix using 40mm gauge hard granite metal including cost and conveyance of all materials and labour chargesRCC(1:1.5:3)prop using 20mm gauge HG crusher metal including cost and conveyance of all materials and labour charges, centring, mixing, curing charges, cost and fabrication charges of steel for reinforcement for Side short wall upto bottom slab and top slab Cost and fabrication charges of Steel for reinforcement including cutting, bending, cranking, tying with binding wire etc complete,supply and erection of CI verticals including contractors profit 13.615% and excluding taxes