Mission Bhagiratha Department Tender

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;For Pre cast top slab(100mm thick)

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;For Side walls allround

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;RCC (1:1.5:3) using 20mm HBG metal including cost and conveyance of all materilas,labour charges and centering etc., complete but excluding cost of steel and its fabrication. On 25mmØ GI Pipe lines for CONSTRUCTION OF Valve Chamber for Raft

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;CC (1:4:8) Using 40mm HBG metal including cost and conveyance of all materials,labour charges etc., complete for foundation.. - OOn 25mmØ GI Pipe lines for CONSTRUCTION OF Airvalve stem

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;CC (1:4:8) Using 40mm HBG metal including cost and conveyance of all materials,labour charges etc., complete for foundation.. - On 25mmØ GI Pipe lines for CONSTRUCTION OF Valve Chamber

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion. - On 25mmØ GI Pipe lines for CONSTRUCTION OF Air valve stem

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;Earth work excavation and depositing on bank with an initial lead of 50m and lift of 3.0m in all types of soils except hard rock requiring blasting for founadtion. - On 25mmØ GI Pipe lines for CONSTRUCTION OF Valve Chamber

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;Supply & delivery of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing conforming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall / Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make)

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including Air valve cage of size 1.51x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x0.3x0.6m to a depth of 0.90m, with IS40x40x5 mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and width 40x60 mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 100mm dia 2.0m long DI D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges all incidental and operational charges etc complete for finished item of work. The work shall be executed based on the approved designs and drawings of the department.50mm Ari valve on 25mm GI pipeline

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding CED. 50mm valve on 25mm GI Pipe line - PN 1.60

Providing MB Water Supply to Gaurinath White Gold Cotton Mills;Construction of pipe line for water supply including supply,delivery,laying and Jointing of GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges including EWE etc complete 25mm Dia GI medium grade