Mission Bhagiratha Department Tender

R and R Work;Providing 15mm dia House Service Connection as per standard specification including the cost of the materials like PP Clamp Saddle comply with AS/NZS 4793 or relevant international standards Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt washer. Maximum working pressure rating of 10 bar, Compression Fittings ( FTA & FTO) Elbows, OD -20mm MDPE pipe PN-12.5, S&F of 15 mm brass body CP finish bib tap, S& F 15 mm Nominal Bore GI pipe Medium Grade , S&F of tamper proof house hold non return cum flow control valve , including lowering, laying and jointing including earth work excavation and refilling the pipe line trench after laying the pipe line etc complete as directed by departmental officer for finished item of work as per specifications of SSR 2021-22 excluding GST for 75mm dia Saddles

R and R Work;Supplying and placing the Design mix Vibrated Cement Concrete of M20 grade corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing excluding Seiniorage taxes for finished item of work excluding GST for C.C. BLOCKS of Size 0.60x0.60x0.20 m for House hold connections

R and R Work;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH complete for finished item of work excluding GST for C.C. BLOCKS for House hold connections

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 250mm dia on 250 mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 200mm dia on 200 mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 150mm dia on 180 mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 150mm dia on 160 mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 150mm dia on 140 mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 100mm dia on 110 mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 80mm dia on 90mm HDPE Pipe line.

R and R Work;Manufacture, Supply and delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves)of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe including supply delivery laying and joinitng of S/F tapered tailpeices of 5 and 15 degrees on either ends to suit the main pipeline and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts, Dismantling Joints and labour charges with construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work excluding GST. 80mm dia on 75 mm HDPE Pipe line.

R and R Work;Construction of pipelines for water supply with 250 mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 200 mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 180 mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 160 mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 140 mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 110 mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 90mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of pipelines for water supply with 75mm 6 kg/cm2 HDPE PE-100 grade dia pipes as per IS 4984:2016 with its amendments and revisions thereon and including supplying of pipes,necessary specials such as bends, Tees, etc as per site requirements, lowering, laying and jointing of pipes (with butt fusion welding) true to alignment and gradient, excavation of Pipeline trench (Earthwork excavation in all soils upto SDR using machine rate for 2/3rd and manual rate for 1/3rd of quantity) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils, boulders and BC Soils) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing to the required pressure etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges and all incidental and operational charges for finished item of pipeline work, but excluding GST

R and R Work;Construction of 60 KL capacity 12mt staging OHSR as per Designs and drawings approved by the Department, using M30 Grade Design mix concrete at the site selected by the department, using vibrated reinforced cement concrete and as per the approved designs and drawings (Part C of Volumne-I) and specified in technical specification(Part B of Volume I)with raft foundation ,plastering with CM(1:3) 2 coats of Weather proof emulsion painting for all external surfaces including Roof dome over one coat of Primer of approved make and 3 coats of Food grade epoxy paint to inner surface of the reservoir including roof dome, lettering as per Dept Direction, Supply, delivery & fixing of Inlet, Out let, Scour & Over flow Connections with required D/F DI Pipes, D/F DI Fittings (Specials), DI Valves, MS Nuts & Bolts, Washers including hoisting, jointing with Rubber insertion , Nuts & Bolts.. Fixtures includes :a) RCC /Aluminium Ladder inside 0.60 m wide b) Spiral staircase as per the Designs & Drawings approved by the Department with SS Railing upto 1.2m height c) Lightening arrestor, including conductor and earthing etc with relevant IS codes d) RCC ventilators with copper or stainless steel fly proof mesh e) D.I Manholes frame and cover 0.60 x 0.60 m as per IS specifications - Light duty 2 Nos f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No g) Minimum staging for all ELSR/OHSR shall be 12.0mts. h) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1.20mts i)The railing provided to the gallery and stair case shall be with stainless steel of grade 303 for a height of 1.20mts. j)The dog legged staircase shall be enclosed with brick / CRS wall on three sides and front side with PVC door of standard make up to 1st brace level from ground level to prevent unauthorized entry k) D.I swan neck ventilators shall be provided in top dome and slab 4Nos minimum, complete for finished item of work excluding GST as per SSR 2021-22 Specifications , at Zone-V at R&R Centre, Udandapur

R and R Work;Construction of 250 KL capacity 12mt staging OHSR as per Designs and drawings approved by the Department, using M30 Grade Design mix concrete at the site selected by the department, using vibrated reinforced cement concrete and as per the approved designs and drawings (Part C of Volumne-I) and specified in technical specification(Part B of Volume I)with raft foundation ,plastering with CM(1:3) 2 coats of Weather proof emulsion painting for all external surfaces including Roof dome over one coat of Primer of approved make and 3 coats of Food grade epoxy paint to inner surface of the reservoir including roof dome, lettering as per Dept Direction, Supply, delivery & fixing of Inlet, Out let, Scour & Over flow Connections with required D/F DI Pipes, D/F DI Fittings (Specials), DI Valves, MS Nuts & Bolts, Washers including hoisting, jointing with Rubber insertion , Nuts & Bolts.. Fixtures includes :a) RCC /Aluminium Ladder inside 0.60 m wide b) Dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with SS Railing upto 1.2m height c) Lightening arrestor, including conductor and earthing etc with relevant IS codes d) RCC ventilators with copper or stainless steel fly proof mesh e) D.I Manholes frame and cover 0.60 x 0.60 m as per IS specifications - Light duty 2 Nos f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No g) Minimum staging for all ELSR/OHSR shall be 12.0mts. h) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1.20mts i)The railing provided to the gallery and stair case shall be with stainless steel of grade 303 for a height of 1.20mts. j)The dog legged staircase shall be enclosed with brick / CRS wall on three sides and front side with PVC door of standard make up to 1st brace level from ground level to prevent unauthorized entry k) D.I swan neck ventilators shall be provided in top dome and slab 4Nos minimum, complete for finished item of work excluding GST as per SSR 2021-22 Specifications , Each at Zone-I, Zone-II, Zone-III & Zone-IV at R&R Centre, Udandapur