Mission Bhagiratha Department Tender

Water Supply;Providing 15mm dia House Service Connection as per standard specifications including the cost of materials like PP Clamp Saddle shall comply with AS/NZS 4793 or relevant international standards-Mechanical tapping saddles for water works purposes and designed for use with PVC/PE pipe as per IS 4985/ IS 4984 respectively. These saddles should be contoured to fit around the pipe. PP Saddles shall be blue with moulded SS female threaded outlets. Seal shall be thermoplastic elastomer rubber suitable for drinking water and SS nut-bolt-washer. Maximum working pressure rating of 10 bar., Supply of 20mm x ½? PPR Female Threaded Adaptor conforming to DIN Standards 8077/8092,Supply of tamper proof house hold non return cum flow control valve (with all three parts made by using sold steel bars of SS316) with CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.5 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEEO manual) including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation but excluding GST.,Manufacture, Supply & Delivery of MDPE pipe conforming to ISO 4427 Part-2 (or any equivalent Bureau of Indian Standards code) of PE-80 grade material along with all fittings, including cost of materials, manufacturing, loading, unloading, stacking, transit insurance, transportation to any where in Telangana but excluding GST.,S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 (TBSP- F.1-01),S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete. (TBSP-GI-07),Labour charges for fitting and testing - Earth work excavation & refilling for trench of size 0.9 x 0.9x0.9m,Excavation, refilling of pipe line trench, etc., all charges for laying of MDPE pipe lines etc., including contractors profit, exluding GST

Water Supply;Restoration of plain cement concrete pavement with 0.7 width x 0.15 thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per GORT No. 63 of PR 7 RD dt. 24.01.2017 providing VCC (1:2:4) M 20 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using scareed and plate vibrators and finished in continuous operation including curing of concrete slabs for 14- days. and water finishing to lines and grade as per Technical Specification Clause 1501 MORD

Water Supply;Cutting CC road surface with 0.7 m width x 0.15 thickness including stacking of excavated materials excluding Taxes. For pipe dia 63mm to 315mm