Mission Bhagiratha Department Tender

Construction of 90KL Sump cum Pump House;Supply and Fixing of 18 Gauge MS Plain Sheet Door with frame made of Angular of 40 x 40 x 6 mm with and inner frame of single Shutter with MS "L" angle of 40 x 40 x 5mm and welded with 2 Nos. of 25 x 25 x 3mm angle and 1 No 30 x 4mm flat for each leaf and welded with 3 Nos. of 125mm {5"} long MS Powder Coated Hinges, 1 Nos. of 250mm long MS Powder Coated Aldrop, 1 No. of 250mm MS Powder Coated tower bolts and 6 Nos. of 225mm long hold fasts of 40 x 40 x 6mm and 2 Nos. of 125mm MS Powder Coated Handles, including Red Oxide Paint including cost and conveyance of all materials to site and all labour charges etc., complete for finished item of work. Door of 2.10 x 1.2 mts

Construction of 90KL Sump cum Pump House;Epoxy protective coating with procoat SNF (item 279 SSR) paint 3 coat over water proof plastering including conveyance of all m/labour charges etc?,complete

Construction of 90KL Sump cum Pump House;Construction and Supply of Stainless Steel pipes of all sizes & Diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish for Handrailing on structures - 38.1 mm Dia Pipe 16 Guage

Construction of 90KL Sump cum Pump House;Earthing: Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Construction of 90KL Sump cum Pump House;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges. - For Gate Pillar Footings

Construction of 90KL Sump cum Pump House;Manufacture, Supply and delivery of DI DF dia Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40 SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89IS14846-2000DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. - 50mm dia Sluice valve - Delivery

Construction of 90KL Sump cum Pump House;Manufacture supply laying testing Commissioning of Delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers etc. complete including providing applying of epoxy coating. C Class Heavy Pipes - 80mm dia MS pipes - Manifold

Construction of 90KL Sump cum Pump House;Construction of pipe line including manufacture, supply and delivery of HDPE PE-100 grade pipe line per IS:4984/1988 with its amendments and revisions and as shown in the drawing (Part C of Vol - I) and technical specifications(Part B of Vol - I) including supply of pipes, trench excavation by machinery and preparing the bed surface to the gradient by manual for pipe lines in all soils except rock, lowering, laying and jointing of pipes, Specials,valves true to alignment and gradient, asper approved LS drawing, refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete as specified. The rates are inclusive of Cost of pipes, specials, Lowering , laying and testing and ,labour charges for finished pipeline work but excluding CED and other taxes,cost of vales, Anchor/thrust blocks. And Execution as per approved designs and LS drawings to suit the feild requirement complete and surge. - 75mm dia HDPE PN8 pipeline

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Side wall - For Bottom haunches

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Top circular slab

Construction of 90KL Sump cum Pump House;Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH and Earth work excavation in all soils upto SDR except hard rock requiring blasting by using Manual

Construction of 90KL Sump cum Pump House;Supply, fabricating , installing structural steel supports for fixing all sizes of Angles including cost of material, conveyance, labour etc complete with painting. Y Angle 50 X 50 X 6 MM

Construction of 90KL Sump cum Pump House;Interiors are painted with 1+2 coat of Oil Bounded Distemper paint including cost, labour and conveyence

Construction of 90KL Sump cum Pump House;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges. - For Gate Pillar Footings

Construction of 90KL Sump cum Pump House;Supply and applying of Red Oxide Primer Paint for iron works of Grade -1, to MS Angles

Construction of 90KL Sump cum Pump House;Vertical Posts

Construction of 90KL Sump cum Pump House;Sand filling in basement with watering and tamping including cost and Conveyance of all materials, labour charges and seigniorage etc complete. For foundation levelling course

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Slab - (3-6 Mtr AGL) Sun shades

Construction of 90KL Sump cum Pump House;Providing, transporting, fabricating and fixing in position structural support made out of MS pipes, angles, channel and plate etc including two coats of synthetic enamel paint over the fabricated structure and fixing the structure to the raft/ wall as required all complete - For Pumps and Panel board

Construction of 90KL Sump cum Pump House;Manufacture supply laying testing Commissioning of Delivery MS pipes of pressure rating 16 Kg/cm2 conforming to IS 3589 and 1239 including fittings like elbows tees flanges tapers etc. complete including providing applying of epoxy coating. C Class Heavy Pipes - 50mm dia MS pipes - Delivery

Construction of 90KL Sump cum Pump House;Supply and delivery of Single Chamber DI Air Valve of PN 1.6 rated with Body and cover in Ductile Iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue, drilled as per IS:1538.with Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Isolation - Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 1.6 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538, including supply of DI/MS Tee to suit the main pipe and Air Valve including laying, jointing of DI/MS Tee and Isolation Sluice valves along with Air Valve including cost of Jointing Materials such as Rubber Gaskets, Bolts & Nuts including with a vertical stem of 50mm dia 3.0m long MS D/F pipe including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamail paint including fixing charges and Airvalve encasement all incidental and operational charges etc complete for finished item of work. - 50mm Air valve on 63mm dia HDPE pipeline

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Side wall - 2nd step with 200 mm thick

Construction of 90KL Sump cum Pump House;Panel Board : Supply and Transportation of control panel for three phase submersible motors above 7.5 HP to 12.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Construction of 90KL Sump cum Pump House;Fabrication and Fixing of SS Ladder inside water retaining portion with 40mm dia SS 304 pipe of 1.5mm thk of length 4.0 m - 2 nos along the height and 40mm dia SS 304 pipe of 1.5mm thk of 450mm length 13No, stiffened on back side with 65x65x6mm thk MS angle of length 50 mm - 2 Nos from Cantilever slab above access shaft/ Side wall to water retaining portion OHBR/ GLBR/ Sump

Construction of 90KL Sump cum Pump House;Supply, Fabrication and fixing of MS gate using including all necessary material for gate including cost and conveyance of all material and labour charges etc complete

Construction of 90KL Sump cum Pump House;Supply, construction of Phenyl ventilator with VRC M30 consisting of 4 nos of 100mm dia column connected by tie beam VB1 of size 150x150mm in two rows and a slab of size 950x950mm of 100mm thick on total 0.217 cum and Fe500 Steel of total 16Kg and covered with flymesh all around and at bottom in top dome of all OHBR including all materials, labours and consumbales etc. complete - Wire mesh 20 gauge for Phenial

Construction of 90KL Sump cum Pump House;Supply and Fixing of 18 Gauge MS Plain Sheet Door with frame made of Angular of 40 x 40 x 6 mm with and inner frame of single Shutter with MS "L" angle of 40 x 40 x 5mm and welded with 2 Nos. of 25 x 25 x 3mm angle and 1 No 30 x 4mm flat for each leaf and welded with 3 Nos. of 125mm {5"} long MS Powder Coated Hinges, 1 Nos. of 250mm long MS Powder Coated Aldrop, 1 No. of 250mm MS Powder Coated tower bolts and 6 Nos. of 225mm long hold fasts of 40 x 40 x 6mm and 2 Nos. of 125mm MS Powder Coated Handles, including Red Oxide Paint including cost and conveyance of all materials to site and all labour charges etc., complete for finished item of work. - Window of size 1.35 X 1.20 mts

Construction of 90KL Sump cum Pump House;Manufacture, Supply and delivery of DI DF dia Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40 SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89IS14846-2000DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. - 50mm dia Sluice valve - for Isolation of Air valve

Construction of 90KL Sump cum Pump House;Cement concrete (1:4:8)prop using 40 mm gauge HG metal including cost & conveyance of all materials and labour charges ,seigniorage charges using concret mixer etc complete

Construction of 90KL Sump cum Pump House;Supply and Fixing of Hot dipped Galvanized Iron Chain link mesh 8 gauge -(4.0 mm) as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge - Chain Link Mesh

Construction of 90KL Sump cum Pump House;Construction of pipe line including manufacture, supply and delivery of HDPE PE-100 grade pipe line per IS:4984/1988 with its amendments and revisions and as shown in the drawing (Part C of Vol - I) and technical specifications(Part B of Vol - I) including supply of pipes, trench excavation by machinery and preparing the bed surface to the gradient by manual for pipe lines in all soils except rock, lowering, laying and jointing of pipes, Specials,valves true to alignment and gradient, asper approved LS drawing, refilling trenches with excavated earth except rock requiring blasting (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete as specified. The rates are inclusive of Cost of pipes, specials, Lowering , laying and testing and ,labour charges for finished pipeline work but excluding CED and other taxes,cost of vales, Anchor/thrust blocks. And Execution as per approved designs and LS drawings to suit the feild requirement complete and surge. - 63mm dia HDPE PN8 pipeline

Construction of 90KL Sump cum Pump House;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges. - For Gate Column 0-3M AGL

Construction of 90KL Sump cum Pump House;Plastering in CM(1:3) prop 12mm thick including cost&coveyance of all materials lalbour charges,seign.charges etc.complete for wearing coat. - Outsite

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Slab - Pump house Top slab

Construction of 90KL Sump cum Pump House;Cement concrete (1:4:8)prop using 40 mm gauge HG metal including cost & conveyance of all materials and labour charges ,seigniorage charges using concret mixer etc complete

Construction of 90KL Sump cum Pump House;Earthwork excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH and Earth work excavation in all soils upto SDR except hard rock requiring blasting. by using Machinery

Construction of 90KL Sump cum Pump House;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges with construction of RCC valve chambers etc.complete for finished item of work - 80mm dia Sluice valve on 75mm dia HDPE pipeline

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Raft slab

Construction of 90KL Sump cum Pump House;Supply, delivery ,transporation, errection, testing and commisioning of 15 HP Three Phase open well submersible motor pump set of Kirlosker/Crompton /Texmo/CRI/KSB/AQUA make with water resistant dynamically balanced impeller with stainless steel sleeves pump coupling and pivot with squirrel cage inductor motor of 3phase 415V 50HZ AC supply heavy copper windings with with water proof insulation and high pressure strength not to be efected by chemicals in water with suitable bronze bearings errected with h-type clamps odutable size and strength including cost of all materilas, transportation and all labour chrages as per the directions of the Engineer-in-charge.

Construction of 90KL Sump cum Pump House;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges. - For poles

Construction of 90KL Sump cum Pump House;Plastering in CM(1:3) prop 12mm thick including cost&coveyance of all materials lalbour charges,seign.charges etc.complete for wearing coat. - Inside

Construction of 90KL Sump cum Pump House;Manufacture, Supply, Delivery and fixing of 50mm dia C.I Dismantling Joints with both side flange end suitable for installation in between flange end pipes of delivery pipe.

Construction of 90KL Sump cum Pump House;Construction and Supply of Stainless Steel pipes of all sizes & Diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish for Handrailing on structures - 25.4 mm Dia Pipe 16 Guage 2nd

Construction of 90KL Sump cum Pump House;Cost of steel and its fabrication charges incl., bending, cost of binding wire etc., complete

Construction of 90KL Sump cum Pump House;Cables: Supply and run of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) in exsting trench/wall including providing end terimations with glands. lugs , crimping job etc complete for finished item of work.

Construction of 90KL Sump cum Pump House;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges. - For Plinth Beam

Construction of 90KL Sump cum Pump House;Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs

Construction of 90KL Sump cum Pump House;Supply and Placing of the DI D/F Pipes 150 mm Dia Pipe 2 Mtr-1, 1.5 Mtr-1, 1 Mtr-1, Duct foot bend 1 No's, Bell mouth 1 No's, 200 mm Dia Pipe 2 Mtr-1, 1.5 Mtr-1, 1 Mtr-1, Duct foot bend 1 No's, Bell mouth 1 No's & 150MM Sluive Valve

Construction of 90KL Sump cum Pump House;Impervious coat plastering with CM(1:3),12mm thick including cost and conveyance of all the materials ect complete.

Construction of 90KL Sump cum Pump House;Manufacture, Supply, delivery, installation and commissioning of 50mm dia Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. excluding transportation etc., complete. Dia in mm. PN-20

Construction of 90KL Sump cum Pump House;Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint including cost, labour and conveyence

Construction of 90KL Sump cum Pump House;Supply and delivery laying true to alignment jointing with flanges of PN 1.6 rated DI D/F Gate Valves (Soft Seated) Resilient seated soft seating gate valves (Sluice valves) of PN 16 grade with body bonnet of ductile cast iron of grade GGG40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4, valves should be with Electrostatic powder coating both inside and outside pocket less body passage, drilled as per IS:1538.to suit the pressure class of pipe and Valve including cost of joint materials such as rubber gaskets Bolts and Nuts and labour charges with construction of RCC valve chambers etc.complete for finished item of work - 80mm dia Sluice valve on 63mm dia HDPE pipeline

Construction of 90KL Sump cum Pump House;Manufacture, Supply and delivery of DI DF dia Sluice Valves of PN-16 with body bonnet of ductile cast iron of grade GGG40 SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89IS14846-2000DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538. for finished item of work as directed by the Engineer-In-Charge. 80mm dia Sluice valve - Pressure main

Construction of 90KL Sump cum Pump House;Construction of super stucture with brick masonary in (1:6) using 2nd class bricks including cost and conveyance of all materials,labour charges and seign. charges etc. complete

Construction of 90KL Sump cum Pump House;Manufacture, Supply,delivery,laying and Jointing of 50mm dia Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 40012 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve , DI Specials to suit the pressure class of pipe, Valve should be electrostatically powder coated from inside & outside.

Construction of 90KL Sump cum Pump House;Construction and Supply of Stainless Steel pipes of all sizes & Diameters for - 304 Grade including Labour charges for Fabrication of stainless steel railing works using stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish for Handrailing on structures - 25.4 mm Dia Pipe 16 Guage 1st

Construction of 90KL Sump cum Pump House;Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. For M30 grade Concrete for Side wall - 1st step with 200 mm thick