Mission Bhagiratha Department Tender

NA;Chakriyal VT Pump Set Supply, delivery and fixing of Vertical Turbine pump set Model: WVT-26-12 pump Discharge-3500LPM, Head-50mtr, well depth-21mtr along with Motor Stool, Sole Plate, Stainer, TBH, Foundation bolt & nuts and 45 kw Motor,includig of required dia suction pipe etc., complete. for Chakrial Intakewell . Excluding GST

NA;Supply, delivery and fixing of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing confirming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make), Including construction of RCC chamber of suitable size, excluding GST 450mm on 800mm DI at Raipahad

NA;Supply, delivery and fixing of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing confirming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make), Including construction of RCC chamber of suitable size, excluding GST 800mm on 800mm DI at Raipahad

NA;Supply, delivery and fixing of Electromagnetic Flow meter, manufacturer should have ISO 9001:2008 certification and flow meter testing confirming to ISO 17025; Flow meter Tube: SS 304;Flanges: Carbon Steel as per DIN PN 10 or higher rating as per requirement; Liner: Hard Rubber or PTFE suitable for drinking water application; Grounding: Grounding Rings SS 304 /Grounding Electrodes of material SS 316; Coil Housing and Junction Box: SS 304 /Die Cast Aluminum/ Carbon Steel with anticorrosive epoxy coating of minimum thickness 150 microns/ equivalent as per EN ISO-12944 standard (as per the site condition) ; Ingress Protection: IP 68 for sensor and IP 67 for transmitter; Flow Transmitter Accuracy: +/- 0.5% of the measured value for velocities 0.5 m/sec and above; Display: Digital LCD/LED (backlit LCD / LED ) Display, Instantaneous flow, Bi- Directional flow and Totalized flow; Cable between Flow Head and Transmitter: Maximum 25 meters including PVC conduit; Surge Arrester: To be provided;Power Supply & Output: 230 V AC or 24 V DC as applicable to Site condition & 4-20 mA HART; Compatible to SCADA/WEB Based Data acquisition System; Flow meter test lab certification should be provided from NABL approved lab/FCRI ; Excluding all taxes with 5 years Warranty. (Make: M/s Krohne Marshall/Endress+Hauser/ Yokogawa /Siemens/ Emerson/ABB/ or equivalent make), Including construction of RCC chamber of suitable size, excluding GST 1000mm on 1000mm DI at Raipahad

NA;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846- 2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept.. Two coats of primer suitable for EPOXY PAINTS finish shall be applied to all metal surface and finally two coats of Epoxy Paint. The Valves shall be tested for (closed end Test) against Hydrostatic test requirement. The operation can be done with hand wheel/cap. ISI Marked.,dismantling joint to suit the pressure class of pipe, etc.complete for finished item of work The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of work, but excluding GST On HDPE Pipeline 150 mm dia on 140 mm dia line

NA;'Manufacture, supply and delivery of Single Chamber DI Air Valve (PN 16)with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST on HDPE Pipeline 50 mm dia on 140 mm dia line (Fixing Only)

NA;'Manufacture, supply and delivery of Single Chamber DI Air Valve (PN 16)with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept pipe line including supply of Air valve ,CI Specials to suit the pressure class of pipe and construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete for finished item of work but excluding GST on HDPE Pipeline 50 mm dia on 140 mm dia line

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work and Excluding GST 140 mm dia 6 Kg/Cm2 Only Laying and jointing

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work and Excluding GST 140 mm dia 6 Kg/Cm2

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work and Excluding GST 110 mm dia 6 Kg/Cm2

NA;Construction of pipe line for water supply with HDPE pipes (PE 100) as per IS:4984/2016,with its amendments and revisons thereon including supplying of pipes, specials as per requirements, lowering, laying and jointing of pipe lines true to alighnment and gradient, trench excavtion for pipe lines in all soils except Rock requiring blasting and refilling trenches with excavated earth(other than rocky soil and boulders) with watering, tamping and removeing surplus earth from site of work and filling pipe line with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials and labour charges for finished item of pipe line work and Excluding GST 90 mm dia 6 Kg/Cm2

NA;Construction of pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes with cement mortar lining inside the pipe as per IS 4179/1989 with its amendments and revisions thereon and with rubber gaskets as per IS:8329-2000, including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992 and jiffy joints, specials with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation (Earthwork excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST 400mm dia DI K9 Pipeline

NA;Pipeline Repairs & Renewals Construction of pipelines for water supply with centrifugally cast (spun) Ductile Iron S/S pipes with cement mortar lining inside the pipe as per IS 4179/1989 with its amendments and revisions thereon and with rubber gaskets as per IS:8329-2000, including supply of pipes and rubber gaskets, mechanical joints as per IS:13382-1992 and jiffy joints, specials with DI as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation (Earthwork excavation in all soils upto SDR using machine with 2/3rd and manual with 1/3rd) of pipelines in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete., The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST 150mm dia DI K9 Pipeline

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Andole constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be adopted as per cluase no 6.9 of Vol-I -PART A Chakriyal 4MLD ( to Supply 3569.28 KL per day )

NA;"Operation & Maintenance of integrated CPWS Schemes under Medak Segment in Andole constituency of Sangareddy Dist. for the period from date of agreement to 31.03.2024 and to supply treated potable drinking Water to the habitations at the specified quantity and quality as per Mission Bhagiratha Standards including all operating expenses like wages and other amenities as applicable as per the minimum wages act, mobility/ transportation facilities, etc. of the designated qualified Pump Operators, Fitters, Helpers, Watchmen for carrying out all operations involved in drawing of water from source, treatment and supply of drinking water mixing of Bleaching Powder and Alum /PAC as per the CPHEEO manual, relevant IS specifications and other standard procedures as directed by the Employer/ Engineer; routine maintenance, including all incidental inevitable expenses in Operation & Maintenance of the overall scheme etc., complete but excluding cost of chemicals involved in disinfection and flocculation processes, power consumption charges, labour cess The staff for Maintenance of scheme shall be adopted as per cluase no 6.9 of Vol-I -PART A Pocharam 8MLD ( to supply 5179.68 KL per day )