Mishra Dhatu Nigam Limited Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 60,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Mod-i Construction Of Toilet Block Near Hrm And Mod-ii Renovation Of Qcl North Block (g.f), South Block (g.f And F.f)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MDN_95476_1Tender No
AP20241018/EADVT/289/24-25Tender Authority
Mishra Dhatu Nigam Limited ViewPurchaser Address
-Website
http://http://midhani-india.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kinds of soil. From -1.5m lvl to -3.0m lvl
25
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 20 mm nominal size derived from natural sources)
15
-
-
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
20
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as directed by the Engineer in charge.
120
-
-
Disposal of excavated excess earth from the site including conveyance of materials up to an average lead of 1KM away from the site, and correspondiong required lift, loading, unloading etc complete as directed by the EIC. (The quantity is net quantity of capacity of truck after deduction of 20% for looseness) By mechanical transport including loading, unloading and stacking. (Lead upto 1KM away from the site)
38
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using Coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
12
-
-
All works above plinth level upto floor V level
20
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
a) upto ground level- Foundations, footings, bases of columns, etc. for mass concrete.
50
-
-
b) above ground level- Lintels, beams, plinth beams, girders, bressumers, Slab and cantilevers
200
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Thermo-Mechanically Treated bars of grade Fe-500D or more.)
2720
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of Cement mortar 1:6 (1 cement : 6 coarse sand) of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes.
40
-
-
a) Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
220
-
-
b) Providing and laying 12 mm cement plaster 1:6 (1 cement : 6 coarse sand)
60
-
-
c) Providing and laying 6 mm cement plaster 1:3 (1 cement : 3 fine sand)
75
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer),of Make : KAJARIA/AGL/Make approved by EIC, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size of tile is 600 X 1200 mm)
190
-
-
Providing and laying Vitrified tiles in floor of Make : KAJARIA/AGL/Make approved by EIC (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
75
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.
18
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. (New work (two or more coats) over and including water thinnable priming coat with cement primer)
160
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
200
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solid door/window/ Celsetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame size 65 x 100 mm
62.8
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 35 mm thick
21.84
-
-
Supply and fixing of aluminium powder coated ventilator of size of 36''X 18'' windows including provinding of 4 mm thick glass panes, provision of exhaust fan complete & mosquito mesh.
10
-
-
Providing & Fixing of Sanitary Fittings
-
-
-
Providing & fixing European water closet star white of approved make(Parryware/cera/hindware(Economical)), including the cost of providing & fixing seat cover, angle cock of approved by EIC, heavy duty PVC connection inlet pipe etc., closing the joints with white/ coloured cement wherever necessary as per the installation guide given in approved sanitary limited.
3
-
-
Providing and fixing Water Closet squatting pan (Indian type W.C. pan) with 100mm P or S trap, Single Flush low level white P.V.C. flushing cistern (Sleek Fresh(ISI)) with manually controlled device (handle lever) conforming to IS : 7231, also including 15mm inlet connection with brass unions at ends including one 15mm angle valve with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. including P trap of indian W.C shall be encased on CC (1:2:4) 6" alround well above the joints to stop leakage at the joint etc, complete including cost of automatic PVC flush tank 5 litre capacity with flush pipe, ball cock, Angle cock, inlet & outlet arrangement and conveyance of all materials to site, cost of CC bed, labour charges and, charges etc., complete for finished item of work.
5
-
-
Providing and fixing white vitreous china urinal basin (Parryware/cera/Hindware (Economical) with CP brass fittings such as speader with unions and clamps including 25mm CP concealed flush valve with isolation valve, CP brass flush bend also dome shaped waste coupling, union, nut 50mm dia PVC waste pipe clamped in walls with suitable trap leading up to the P Trap etc. including cutting and making good walls, including cost and conveyance of all materials to site,labour charges etc., complete for finished item work.
4
-
-
Providing & fixing of 12mm thick toughened glass urinal partition size (3'X2') fixing to the wall including brackets support complete etc.
5
-
-
Supply and fixing of CPVC 25 mm dia pipe (Aashirvad / Sudhakar) with complete connection fittings.
60
-
-
Supply & fixing PVC out let pipe 75 mm dia pipe (Aashirvad / Sudhakar) including all connected fittings like vent cap and clamping etc., complete
30
-
-
Supply & fixing PVC out let pipe 110 mm dia pipe (Aashirvad / Sudhakar) including all connected fittings like vent cap and clamping etc., complete
40
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms, 15 mm nominal bore (Make Seiko/ Parryware/ Cera).
16
-
-
Providing and fixing C.P. brass angle valve for geyser points 15mm nominal bore (Make Seiko/ Parryware/ Cera).
8
-
-
Providing & fixing of stainless steel push cock of approved make complete
4
-
-
Providing and fixing of Health Faucet & Bib cock 2 in 1 tap 20mm nominal bore with plunge complete and all connected accesories.
3
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. (25 mm nominal bore)
4
-
-
Providing & fixing uplasticised PVC connection pipe with brass unions (20mm nominal bore)
4
-
-
Providing and fixing of PVC floor nahani traps including jointing with cement solvent complete in 75mm .
8
-
-
Providing & fixing of C.P brass jalli of approved make.
6
-
-
Providing & fixing of C.P brass hole jalli of approved make.
2
-
-
Providing and fixing of CP brass soap dish tray of good quality of normal make complete.
5
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
-
-
m) Providing and placing on terrace (at all floor levels) polyethylene water storage tank of capacity 1000 litres (Sintex), IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2
-
-
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4
2
-
-
mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.
-
-
-
Supply of labours
-
-
-
a. Skilled
10
-
-
b. Un-skilled
20
-
-
Mod-II : BOQ for Renovation of wash rooms at QCL North block(GF), South block (GF+FF)
-
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
32
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm
426
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
3
-
-
Dismantling of RCC work by manually/ mechanical means including cutting reinforcement bars manually/by mechanical means in RCC works, stacking of steel bars and disposal of unserviceable concrete at a place directed by Engineer- in- Charge.
1
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.
-
-
-
All kinds of soil. From 0.00m lvl to -1.5m lvl
4
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
1
-
-
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) et complete as directed by EIC
2
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of Cement mortar 1:6 (1 cement : 6 coarse sand) of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes.
3
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Thermo-Mechanically Treated bars of grade Fe-500D or more.)
100
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using Coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/Cum. Excess/less cement used as per design mix is payable/recoverable separately).
-
-
-
All works upto plinth level
2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
a) above ground level- Lintels, beams, plinth beams, girders, bressumers, Slab, Columns,and cantilevers etc,.
10
-
-
Providing and laying Vitrified tiles in floor of Make : KAJARIA/AGL/Make approved by EIC (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 600 x 600 mm
69
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer),of Make : KAJARIA/AGL/Make approved by EIC, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size of tile is 600 X 1200 mm)
411
-
-
Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1cement : 6 coarse sand). Above plinth level upto floor V level
6
-
-
Providing and laying 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
444
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer
213
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
149
-
-
Providing and fixing factory made single extruded WPC (wood polymer Composite) solid door frame/chowkat of size : 65 x 100mm having minimum frame density of 750 Kg/Cum & minimum compressive strength of 58 N/mm2, modular of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS Hold fast/lugs/SS dash fasterners of required dia and length. Cost also includes for MS hold fast/lugs/SS fasterners etc complete as per direction of EIC.
117
-
-
Providing and fixing factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of required size and 35mm thick having minimum density of 650 Kg/Cum & minimum compressive strength of 50 N/mm2, modular of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws. The cost also includes stainless steel butt hinges and necessary fittings like tower bolts, aldrops with ss screws etc complete, all as per direction of EIC. 35 mm thick WPC door shutter
38
-
-
Supply and fixing in position powder coated aluminum fully glazed windows of approved colour using Aluminum 3 track box section frame with top and verticle sides and for frame bottom using sliding shutters made out of aluminum sections, inside the h-section for top and bottom and plain section for ends including making window weathering seal proof and mounted in fibre wheels 2 nos for each shutter and fixed 5 mm thick plain float glass 1st quality with necessary PVC rubber beeding alround including providing 2 nos maruti lock cleat for window with 7.5mm thick aluminum grill and mesh as approved by the department @ 3.58/kg/m2 including cost and conveyance of all materials, labour charges for making, erecting in position etc., . gaps between wall and Al frame shall be closed with white cement, where ever required complete.
8.3
-
-
Supply and fixing of aluminium powder coated ventilator of size of 24''X 18'' windows including provinding of 4 mm thick glass panes, provision of exhaust fan complete & mosquito mesh.
13
-
-
Providing & Fixing of Sanitary Fittings
-
-
-
Providing & fixing European water closet star white of Hindware make: Universal P standard closet, cat No: 20012 or equivalent make as approved by EIC. The cost includes cover, angle cock of approved by EIC, heavy duty PVC connection inlet pipe etc., closing the joints with white/ coloured cement wherever necessary as per the installation guide given in approved sanitary limited.
8
-
-
Providing and fixing Water Closet squatting pan (Cera make: Orrisa Pan (BR) , Cat no: S3020105) or equivalent make as approved by EIC (Indian type W.C. pan) with 100mm P or S trap, Single Flush low level white P.V.C. flushing cistern (Sleek Fresh(ISI)) with manually controlled device (handle lever) conforming to IS : 7231, also including 15mm inlet connection with brass unions at ends including one 15mm angle valve with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. including P trap of indian W.C shall be encased on CC (1:2:4) 6" alround well above the joints to stop leakage at the joint etc, complete including cost of automatic PVC flush tank 5 litre capacity with flush pipe, ball cock, Angle cock, inlet & outlet arrangement and conveyance of all materials to site, cost of CC bed, labour charges and, charges etc., complete for finished item of work.
4
-
-
Providing & fixing star white Wash basin with pedestal (Parryware/cera/Hindware (Economical) fixing to the wall. The cost includes supply and fixing of heavy duty PVC flexible connection inlet pipe upto 1.50 mtrs long. Also PVC flexible outlet pipe (heavy duty) , two no's angle cocks approved by EIC, waste coupling 32mm, waste pipe, rag bolt / brackets and making good in walls where ever required.
10
-
-
Providing and fixing white vitreous china urinal basin of Hindware make: Dyna, Cat No: 60010 or equivalent make as approved by EIC with CP brass fittings such as speader with unions and clamps including 25mm CP concealed flush valve with isolation valve, CP brass flush bend also dome shaped waste coupling, union, nut 50mm dia PVC waste pipe clamped in walls with suitable trap leading up to the P Trap etc. including cutting and making good walls, including cost and conveyance of all materials to site,labour charges etc., complete for finished item work.
10
-
-
Providing & fixing of 12mm thick toughened glass urinal partition size (3'X2') fixing to the wall including brackets support complete etc.
6
-
-
Providing & fixing angle cock 20mm nominal bore dia.
15
-
-
Providing & fixing of Flush cock 25mm-Push type spring loaded of Hindware make, Cat No: F850020CP complete.
14
-
-
Providing and fixing of Paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete.
10
-
-
Providing & fixing of Long body tap of 20mm nominal bore dia as complete.
15
-
-
Providing and fixing of Health Faucet & Bib cock 2 in 1 tap 20mm nominal bore with plunge complete and all connected accessories.
10
-
-
Providing & fixing of shower along with shower extension rod with complete fittings.
3
-
-
Providing and fixing of 600mm long Towel rod of CP brass frame with accesories complete.
6
-
-
Providing & fixing of Towel ring rod of CP brass frame with accesories complete.
11
-
-
Providing and fixing of soap dispenser of good quality complete.
11
-
-
Providing and fixing of CP brass soap dish tray of good quality of normal make complete.
12
-
-
Providing & fixing of C.P brass jalli of approved make.
22
-
-
Providing & fixing of C.P brass hole jalli of approved make.
5
-
-
Providing and fixing Concealled stop cock with adjustable wall flange (20mm) with all connected fittings complete.
3
-
-
Providing & fixing of 1" PVC connections
15
-
-
Supply and fixing of CPVC 25 mm dia pipe (Aashirvad / Sudhakar) with complete connection fittings.
135
-
-
Supply & fixing PVC out let pipe 75 mm dia pipe (Aashirvad / Sudhakar) including all connected fittings like vent cap and clamping etc., complete
75
-
-
Supply & fixing PVC out let pipe 110 mm dia pipe (Aashirvad / Sudhakar) including all connected fittings like vent cap and clamping etc., complete
60
-
-
Providing and fixing of 1" Ball valve with all connected fittings complete
3
-
-
Providing & fixing of short body tap of 20mm nominal bore dia as complete.
3
-
-
Providing and fixing bevelled edge mirror of size 600 mm X 450 mm of superior glass (of approved quality) complete with 6 mm thick with C.P. brass studs button type & conveyance of all materials to site and all operational ,incidental labour charges etc, complete for finished item of work complete.
12
-
-
Providing and fixing of plastic water tank (Sintex) 1000 Liters including float valve, tank nipple connections etc., complete.
3
-
-
Providing and fixing of PVC floor nahani traps including jointing with cement solvent complete in 75mm .
21
-
-
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
6
-
-
Supply of labours
-
-
-
a. Skilled
15
-
-
b. Un-skilled
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements