Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Rep Replacement To P125 Stn Hq At Afs Hakimpet in Hyderabad, Telangana, with an estimated contract value of Rs. 38,80,000. The bid opening date for this tender is 06-10-2026 and the last date for bid submission is 24-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Telangana Tender

Opening Date6 Oct 2026
Closing Date24 Nov 2026
Tender Amount₹ 38,80,000 
Notes
Download

Costs

Description

Spl Rep Replacement To P125 Stn Hq At Afs Hakimpet

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar all as specified and directed.

3

-

-

... More
Taking down Chowkhats or frames with shutters n exc 1.5 sq. m without taking off shutters fro the frame each complete all as specified and as directed

90

-

-

... More
Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each without taking off shutters fro the frame complete all as specified and as directed.

20

-

-

... More
Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

120

-

-

... More
Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

30

-

-

... More
All same as per item No.8 here in before but 20 mm bore.

30

-

-

... More
Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as direcetd.

1.2

-

-

... More
Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified and as directed.

50

-

-

... More
M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

30

-

-

... More
Demolition of cement concrete reinforced ( reinforcement) any description and in any position not otherwise specialy provided/manhole cover/septic tank.

0.25

-

-

... More
M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed.

170

-

-

... More
M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry, pointed with white/colour cement to match colour of tiles all as specified and directed.

15

-

-

... More
M&L Glazed Ceramic tiles coloured, of size 600mmX350mm/300mmX(7-9)mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

30

-

-

... More
M&L Non Skid Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

120

-

-

... More
M&L Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in skirting in neat cement slurry and pointed in white or coloured cement to match all as directed.

5

-

-

... More
M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:4,backing coat or fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed.

30

-

-

... More
Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

150

-

-

... More
S&F Factory made single extruded approved colored/wood finish WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat Single Rebate of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

25

-

-

... More
S&F Factory made single extruded approved colored/wood finish WPC (Wood Polymer Composite) solid flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, door of approved colour and pattern all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

13

-

-

... More
S&F 125 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and directed by the Engineer-in-Charge

15

-

-

... More
S&F 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

10

-

-

... More
S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

14

-

-

... More
S&F 250mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

5

-

-

... More
S&F mild steel helical door spring, rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge.

5

-

-

... More
S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge.

5

-

-

... More
M&L for Preparing Old wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

25

-

-

... More
S&F factory made approved colored/wood finish UPVC ( Unplastisized Poly-Vinyl Chloride ) Fixed Windows /Louvered multichambered and stiffened / reinforced framed windows using 50mm x 50 mm x 2.3mm (±0.2mm) size sections alround as main frames with necessary Mullion sections of sizes 68mm x 50mm as sash bars (If Required) including the cost and fixing of 5mm thick Pinhead Glass in suitable PVC Louver Clips Fixed to GI Channels (Powdercoated finish), the corners of all the profiles of frames shall be homogeneously fusion heat welded without any gap.Frame shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the window unit to the existing masonry with anchor fasteners as required. The gaps between the widnow frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation team at site.

20

-

-

... More
S&F Factory made approved colored/wood finish uPVC Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

86

-

-

... More
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

30

-

-

... More
S&F 5.5mm Sheet glass(tinted), selected quality, in squares nexc. 0.5 sq. m each pane complete all as specified.

70

-

-

... More
M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m all as specified and directed.

20

-

-

... More
M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

50

-

-

... More
M&L 2 coats of white wash on old plastered surfaces on ceilings complete all as specified and as directed.

20

-

-

... More
M&L 18-20 mm thick Sadarahalli Stones slab (of any type), in steps,Skirting and risers etc any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

40

-

-

... More
M&L Complete removal of existing treatment on walls complete all as directed.

1500

-

-

... More
M&L for preparation of old /New Surfaces of wall and Applying two or more coats coats of Oil bound st Quality Acrelic distempering (ready Mixed) having VOC Content less then 50gms/ltr of approved manufacturer of required shade and colour over a coat of primer over 3mm thick wall putty with white or tinted incl chalk whiting, preparatory to distempering on walls complete all as specified and as directed.

1500

-

-

... More
M&L preparation of old /New Surfaces of wall Finishing walls on Plastered brick/Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

750

-

-

... More
S& F MS Powder Coated Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165(cut to ordinary lengths complete all as specified and directed by engineer in charge.

2000

-

-

... More
S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

2.5

-

-

... More
M&L 1mm thick Laminate sheet (sunmyca sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete, as specified and directed

2.5

-

-

... More
S&F Stainless steel Handle 100mm dia as directed.

10

-

-

... More
S&F Clip on soft hinges full overlay as directed. Make : Godrej

16

-

-

... More
Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

20

-

-

... More
Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

5

-

-

... More
S&F 16mm bore CPVC pipes with SDR 11 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs complete all as specified and directed.

30

-

-

... More
All as per item No.48 above but 20mm bore.

30

-

-

... More
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth

20

-

-

... More
Providing, cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

0.15

-

-

... More
Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

2

-

-

... More
All as per ser Item No 52 above but exc 1.0 Sqm and not exc 2 sqm each complete all as specified and directed

2

-

-

... More
M&L Reinforced cement concrete M-25 (design mix) in Roof Beams,Slabs cantilevers,bressummers, lintels over 1.5m span

0.1

-

-

... More
M&L TMT steel bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia as in reinforcement.

50

-

-

... More
M&L TMT steel bars 6 to 8 mm dia cut to length, bent to shape required including cranking, bending spirally, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia as in reinforcement.

20

-

-

... More
M&L Formwork to sides and soffits offloor or roof beams, beam haunchings,girders, bressummers,lintels slabs , cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

2

-

-

... More
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

70

-

-

... More
S&F sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings all as specified and directed.

1

-

-

... More
S&F CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete as directed by the Engr-in-charge.

1

-

-

... More
Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

1

-

-

... More
S&F Vitreous China wash hand basin whiteflat back, size 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed.

1

-

-

... More
S&F in Repair 15mm bore pillar taps of Swan neck type Hot & Cold CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make: Prayag Catpart No-6314N or quivalent in other make.

1

-

-

... More
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat and cover for pedestal pan with all as specified and directed.

1

-

-

... More
Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and directed.

1

-

-

... More
S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent

3

-

-

... More
S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent

1

-

-

... More
S&F brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as specified and directed Make: Prayag Catpart No-6675 or quivalent in other make.

1

-

-

... More
S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed.

1

-

-

... More
S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make: Prayag/Parryware or equivalent.

4

-

-

... More
S&F Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

1

-

-

... More
S&F Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long in repairs complete all as specified and directed

1

-

-

... More
S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed

1

-

-

... More
S&F CP Towel ring for WHB complete all as specified and directed

1

-

-

... More
S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in all as specified and directed.

1

-

-

... More
S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed

1

-

-

... More
S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed.

4

-

-

... More
S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

4

-

-

... More
S&F in Repair 600x450 mm bevelled edge Cabinet mirror of selected quality glass mounted on frame less and fixed to half cut glass clips with chromium plated brass screws and cup washers in repairs complete all as directed by the Engr-in-Charge.

1

-

-

... More
S&F in Repair 900x450 mm bevelled edge looking Mirror fixed with fasteners complete all as directed by the Engr-in-Charge.

3

-

-

... More
M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed.

54.39

-

-

... More
M&L for Heavy Duty Pavement tiles of size 400x400x12 mm/300x300x12 mm thick for out door spaces any colour/pattren of anti skid , anti bactiarial stain resitance and scratch resitant tiles(Endora tiles) and pointed in chemical laid over 15 mm thick screed bed or bedding layer in CM 1:6 Complete all as specified and directed.

50

-

-

... More
M&L Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed by Engineer in charge.

8.88

-

-

... More
M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

1.1

-

-

... More
M & L for Rendering 15 mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified.

30

-

-

... More
M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

230.51

-

-

... More
M & L 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes as specified and directed by Engineer In charge

4.39

-

-

... More
M&L Machine cut kota stone kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all complete as specified by Engineer in charge

4.39

-

-

... More
Rendering 10 mm thick on vertical surface for as for Kota stone ,terrazo tiles finishes in cement mortar 1:3 all complete as specified by Engineer in charge

0.24

-

-

... More
Machine cut kota stone slab 20- 25 mm thick in riser of steps, skirting, dado and pillers laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete all as complete as specified by Enginner in charge

0.24

-

-

... More
M&L for non skid colour ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:4) coloured tiles all as specified and as directed.

15

-

-

... More
M&L Non skid ceramic tiles (Rectified tiles) of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting including 10mm thick in cement mortar 1:4, scoured for fixing tiles in skirting/ dados etc in neat cement slurry and pointed in white or coloured cement to match all as directed.

7

-

-

... More
M&L Glazed Ceramic tiles coloured, of size 450mmX350mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles including rendering to Stone/Brick masonry surfaces or other than fair faces of concrete surfaces, 10mm thick in cement mortar 1:4, scoured for fixing tiles /stone slabs in skirting/ dados all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above

45.78

-

-

... More
Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

3

-

-

... More
Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

6

-

-

... More
M&L for Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified

60

-

-

... More
M&L for Aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified

12

-

-

... More
M&L for Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified

6

-

-

... More
M & L for fixing ACP in repairs (aluminium composite panel )4.5 mm thinckness to aluminium substructure at any height in any colour (as approved by E in Charge) non toxic PE core -3 mm and back coil 0.5mm with minimum 30 +/- 5 mirror PVDF coating on top coil polyster/epoxy coating on back coil (7+-2 micron) fixed on aluminium sub structures complete all as specified

6

-

-

... More
M&L for Mortice lock 4 levers vertical type, size 100 mm complete all as directed.

6

-

-

... More
M&L for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as directed.

6

-

-

... More
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil

48

-

-

... More
Excavation in post holes each n.exc 0.50 cum getting out. Returning filling in layers n.exc 25cm etc removal at surplus soil to a distance n.exc 50 mt and making good surface in hard/ dense soil

12

-

-

... More
M&L Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) laid in base, mass concrete all as specified and directed by Engineer In charge.

1.46

-

-

... More
M&L Hardcore of gauge exc. 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to a true surface complete all as specified.

4.8

-

-

... More
M & L Type D2 1:4:8 (40mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified.

4.8

-

-

... More
M&L 50mm sand filling under floor all as specified and directed.

2.4

-

-

... More
M&L Machine pressed precast conctete interlocking paver block with grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 all as specified and directed.

48

-

-

... More
M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

0.56

-

-

... More
Removal of Excavated material exc 250m but n exc 500 and deposited where directed

14.4

-

-

... More
S&F Steel work as in tubular / L post trusses,plates, purlins including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St 240 complete all as specified.

1464.83

-

-

... More
M&L for two coats of synthetic enamil paint over a coat of red oxide zinc chrome on new surfaces of any description complete all as specified.

50

-

-

... More
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

63.6

-

-

... More
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

7.2

-

-

... More
S&F in repair vitreous China wash hand basin white,oval type,size 580X450 mm including cutting for pinning in ends of brackets,complete.

2

-

-

... More
S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, .

2

-

-

... More
Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete

2

-

-

... More
S&F brass CP Shower rose with arms 125 mm size fixed to pipe all as specified and directed.

2

-

-

... More
S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

2

-

-

... More
S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make: Prayag/Parryware or equivalent.

6

-

-

... More
S&F in Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.

2

-

-

... More
S&F in repair sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long

2

-

-

... More
S&F Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

2

-

-

... More
S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed

2

-

-

... More
S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed.

4

-

-

... More
S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe. Make : Parryware Cat No T9921A1 or equivalent

2

-

-

... More
Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed, 100mm dia

10

-

-

... More
S &F 75 mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as specified and directed.

2

-

-

... More
S &F 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

5

-

-

... More
S &F 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor all as specified and directed.

5

-

-

... More
S &F 75mm bore PVC(SWR) bend all as specified and directed.

2

-

-

... More
S &F110mm bore PVC(SWR) bend all as specified and directed.

2

-

-

... More
Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

6

-

-

... More
S & F in repair for vitreous china, half stall urinal white with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed

2

-

-

... More
S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

2

-

-

... More
S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.

2

-

-

... More
S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

2

-

-

... More
S&F 600 x 450 mm bevelled edge mirror of selected quality glass mounted on frameless and fixed to wooden plugs with chromium plated brass screws and cup washers in repairs complete all as directed by the Engr-in-Charge.

2

-

-

... More
S&F Factory made single extruded approved colored/wood finish WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

10

-

-

... More
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge

6

-

-

... More
S&F 150 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

2

-

-

... More
Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

84

-

-

... More
M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding in accordance with IS 694, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR ITEM NO. 2,3,4:- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes and conduits to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. Note that if the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

-

-

-

... More
One light point controlled by one; one way switch.

10

-

-

... More
One bell point controlled by one; one way switch.

1

-

-

... More
One fan/exhaust fan point controlled by one, one way switch

10

-

-

... More
One 3 pin socket out let 5 amp point on the (same board) with other switches.

5

-

-

... More
One 3 pin socket outlet 5 amp point on the independent board

5

-

-

... More
All as per item No. 2 here-in-before but with 2.5 sq mm size FRLSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

13

-

-

... More
All as per item No. 2 here-in-before but with 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 15A sockets/ earth plug sockets for ACs and geysers

2

-

-

... More
M&L in replacement for point wiring with 1.5 sq.mm FRLSH insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through existing concealed PVC conduit including FRLSH, PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet box with 3mm thick laminated hylam sheet fixed with cadmium plated screws for mounting switches, sockets, fan regulator, etc including all accesories if required making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.

-

-

-

... More
a) One light point controlled by one switch

10

-

-

... More
b) One 3 pin 6 Amps socket point controlled by one switch on same board

5

-

-

... More
c) One 3 pin 6 Amps socket point controlled by one switch on independent board

5

-

-

... More
d) One ceiling fan point controlled by one switch and regulator

5

-

-

... More
e) One bell point controlled by one switch

1

-

-

... More
All as per item No. 155 here-in-before but with 2.5 Sqmm for 3 pin 6 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

3

-

-

... More
All as per item No. 155 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

3

-

-

... More
S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

35

-

-

... More
Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

71

-

-

... More
Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

31

-

-

... More
Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

30

-

-

... More
Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

21

-

-

... More
Supply and fix modular fan regulator 100 W 2 module, socket type and capacitive type all as specified and directed by Accepting officer

11

-

-

... More
S & F call bell, ding dong AC 230 Volt single pole complete as specified.

1

-

-

... More
S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

2

-

-

... More
Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as apecified and directed by the Engineer-in-charge

10

-

-

... More
Supply and fixing LED luminaire 1200 mm x 300 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as apecified and directed by the Engineer-in-charge

2

-

-

... More
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, luminous efficiency > 100 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface all as specified and directed.

29

-

-

... More
Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

2

-

-

... More
Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

12

-

-

... More
S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by Engr-in-charge.

2

-

-

... More
Supply and fix in replacement MCB, SPN, 40-63 Amps, 240 Volts

2

-

-

... More
S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

10

-

-

... More
Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

180

-

-

... More
M&L for submain wiring along with earth wire with 3 x 6.0 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through existing PVC Conduit in wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Two runs of 6.0 Sqmm copper cable and 1 run of copper earth wire shall be measured as one unit length.

40

-

-

... More
M&L in replacement for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC casing capping in surface/recessed and its all accessories of suitable size complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

40

-

-

... More
All as per item No. 178 here-in-before but with 5 x 10.0 sqmm FRLSH PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Four runs of 10.0 Sqmm copper cable and 1 run of copper earth wire shall be measured as one unit length.

40

-

-

... More
M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

4

-

-

... More
Supply and fixing in replacement LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

2

-

-

... More
Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

2

-

-

... More
Supply and fixing ceiling fans complete with blades, copper motor, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) without remote complete including depositing the old fan in MES E/M store complete all as specified and as directed.

2

-

-

... More
Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly, lubricating with approved lubricants, reassembling, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified and as directed.

10

-

-

... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed

6

-

-

... More
Material and labour for Disconnecting of air conditioners along with stabilizers and accessories and refixing the same after wall work complete all as specified and directed by Engr-in-charge.

4

-

-

... More
Core cutting 40mm dia in stone wall of any thickness including making good the disturbed surface to match with the existing surfaces complete all as specified and directed by the Engineer-in-charge

4

-

-

... More
Taking down, re-laying and testing the existing LT cable of any type and size in pipe / trench / cable duct / fixed on wall by proper shaped GI clamps with nut bolts etc and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge.

40

-

-

... More
Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified .

10

-

-

... More
Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect all as specified and as direcred by Engr-in-Chrage. Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning.

3.24

-

-

... More
Returning and filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed .

6.37

-

-

... More
Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

3.63

-

-

... More
Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by the Engineer-in-charge

260

-

-

... More
Supply and lay GI pipe light grade 40mm dia laid in trenches/concealed in wall for cable protection complete all as specified and directed by Engr-in-chagre.

20

-

-

... More
Supply and laying Rigid non-metallic PVC conduit 32mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed by the Engineer-in-charge.

40

-

-

... More
M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable in accordance with relevant IS with proper colour coding, 1100 volts grade drawn in ISI marked MMS grade PVC conduit of dia 20mm minimum/ casing capping , 1.2 mm thick minimum, 20mm width minimum with double locking arrangement, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge (i.e. 1.6mm thickness) including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) The decision of casinf capping/PVC conduit rests with the Engineer-in-charge.For casing capping, screws of minimum 35x8mm and suitable plugs should be used for fixing. In case of stone walls, wooden gutties shall be grouted in wall for fixing of screws. Distance between 2 screws shall not be more than 600mm. Size of Trunking shall be correct depending on number of wires to be drawn as per SSR Part1 but not less than 20mm. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

-

-

-

... More
One light/buzzer point controlled by one; one way switch.

24

-

-

... More
One fan/exhaust fan point controlled by one, one way switch

11

-

-

... More
M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding and relevant IS, 1100 volts grade drawn for flame proof wiring in ERW steel conduit of size not less than 20mm dia on surface terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories suitable for flame proof wiring and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column and core cutting etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces.In case the electrical box needs to be installed on surface, prior approval must be taken from the Engineer-in-charge and surface modular boxes made of FR grade ABS of minimum 1mm thickness with rounded corners need to be used instead of metal flush boxes. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule. (iv) Steel conduit shall be used in wiring for flame proof fittings wherever applicable

-

-

-

... More
One fan/exhaust fan point controlled by one, one way switch

1

-

-

... More
S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

16

-

-

... More
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed by the Engineer-in-charge

6

-

-

... More
S&F Switch flame proof rotary type with termination box in LM6, 16A, double pole 250V complete all as specified and directed

1

-

-

... More
Supply and Fixing of flame proof exhaust fan 12" including connecting it to the ceiling rose complete all as specified and directed by the Engineer-in-charge

1

-

-

... More
Taking down MCBs, metal clad plug of any type, size and capacity and deposting to MES E/M store complete all as specified and directed by Engr-in-charge

2

-

-

... More
M&L for submain wiring alongwith earth wire with 5 x 10.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including MMS PVC Conduit/casing capping on surface and its all accessories of suitable size on wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Five runs of 10.0 Sqmm copper cable and one run of PVC conduit/casing capping shall be measured as one unit length.

100

-

-

... More
S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 32A complete all as specified and directed.

1

-

-

... More
S&F Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB 63A complete all as specified and directed.

3

-

-

... More
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) including taking down and depositing old fans to MES E/M store complete all as specified and directed by Engineer-in-Charge.

3

-

-

... More
Supply 12" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, powder coated white colour for ceiling fans of any size with all accessories complete all as specified and directed by Engineer-in-Charge.

6

-

-

... More
Supply and fix in replacement Exhaust fan, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed by Engr-in-charge

3

-

-

... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed

4

-

-

... More
M&L for cutting round holes suitable for fixing of exhaust fan any size and shape into through stone/brick walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete including colour/white wash to the disturbed portion all as specified and directed by Engr-in-charge.

3

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.