Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Spl Repair To Road From Rp Gate To Tolichowki Family Quarters Gate At Asif Nagar And Spl Repair To Road In Mkd Area Of Arty Centre Under Ge Golconda in Hyderabad, Telangana, with an estimated contract value of Rs. 1,07,96,000. The bid opening date for this tender is 28-10-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - Telangana Tender
Opening Date28 Oct 2026
Closing Date25 Nov 2026
Tender Amount₹ 1,07,96,000
Costs
EMD
₹ 1,83,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Spl Repair To Road From Rp Gate To Tolichowki Family Quarters Gate At Asif Nagar And Spl Repair To Road In Mkd Area Of Arty Centre Under Ge Golconda
Contact
Tender Id
2026_MES_796168_1Tender No
81370/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
https://mes.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L 75 mm thick (compacted thickness) Wet Mix Macadam (WMM), grading as per table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber. The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge works 2013 and including preparing existing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming / tack coat with bituminous primer at 10 kg per 10 sq metre complete all as specified and directed.
30
-
-
... More
M&L consolidated thickness 75 mm or less, premixed bituminous macadam laid, spread using mechanical paver with 4% binder content by weight of total mix, using paving bitumen binder of grade VG-30 grade by weight of total mix, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc. 12 tonne complete all as specified and directed.
92.65
-
-
... More
M&L bituminous premix semi-dense asphaltic concrete (SDAC), 30 mm consolidated thickness with 5.50% binder (paving bitumen) of grade VG - 30 content by weight of total mix by using mechanical paver and vibratory roller 8 to 12 tonne, spread, rolled and compacted to required chamber and gradient and including preparing the old / new bituminous macadam or SDAC surface by brushing with wire brushes for removing cracked mud, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming tack coat with bituminous primer @ 5 Kg / 10 Sqm of surface using paving bitumen VG-10 complete all as specified and directed.
954.8
-
-
... More
Note: For design purpose min. binder content is specified as 5.5 % for VG-30 grade bitumen and it shall not reduce under any circumstances. During design stage, if binder content exceeds 5.5% no extra payment shall be made to contractor for excess use of binder.
-
-
-
... More
Providing and fixing Glow studs of size 100 x 20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/- 5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as per recommended in BS: 873 part 4:1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer and including taking down complete all as specified and directed.
1060
-
-
... More
M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) and including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) and including making drainage opening wherever required complete all as specified and directed.
273
-
-
... More
M&L moorum / red bajri filling in berm or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed and including watering complete all as specified and directed.
237
-
-
... More
Surface dressing n. exc. 15 cm deep in oft / loose soil complete all as specified and directed.
1060
-
-
... More
M&L hardcore of gauge n. exc. 63 mm using broken stones or boulders, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
113
-
-
... More
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc, or for shafts wells, cesspits, manholes, pier holes etc, n.exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in hard / dense soil and including returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.
48
-
-
... More
M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation complete all as specified and directed.
109
-
-
... More
Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; and including demolition of stone slabs of any thickness complete all as specified and directed.
1060
-
-
... More
M&L machine pressed precast concrete interlocking paver block with grey cement and pigments of any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade and including demolition complete all as specified and directed.
325
-
-
... More
M&L 450 mm reinforced concrete pipes, class NP3, laid and jointed with collars complete all as specified and directed.
24
-
-
... More
M&L block-in-course masonry well bonded, built in CM 1:6 complete all as specified and directed.
12
-
-
... More
Providing, cement concrete type B0 1:2:4 (12.5 mm graded stne aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
3
-
-
... More
M&L pointing to random rubble masonry, uncoursed or
brought upto courses in CM 1:4 complete all as specified and directed.
4.5
-
-
... More
M&L average 2.50 mm thick thermoplastic road marking paint (white and yellow) in centre line / edge line / zebra crossings etc, and including providing drop on glass beads @ 0.25 Kg/ Sqm and including preparation of surfaces as per manufactures instructions complete all as specified and directed.
500
-
-
... More
S&F road stud (cat eye) two way reflective of size 100 x 100 x 25 mm (min size) and max size according to manufacturer made with ABS material, scratch and abrasion resistant, micro plastic, temperature resistant body fixed on bituminous / concrete surfaces as per manufactures instructions complete all as specified and directed.
303
-
-
... More
M&L earth work in excavation in all kind f soils by mechanical means (Hydraulic excavator) / in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 m complete all as specified and directed.
108
-
-
... More
M&L 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified.
325
-
-

