Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Special Repair Replacement To Accounts Section At Afs Hakimpet in Hyderabad, Telangana, with an estimated contract value of Rs. 42,70,000. The bid opening date for this tender is 06-10-2026 and the last date for bid submission is 24-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Telangana Tender

Opening Date6 Oct 2026
Closing Date24 Nov 2026
Tender Amount₹ 42,70,000 
Notes
Download

Costs

Description

Special Repair Replacement To Accounts Section At Afs Hakimpet

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
M&L sand filing under floors including watering and consolidation all as specifide and directed

0.8

-

-

... More
M&L Rubberised machine pressed precast concrete coloured interlocking paver block any shape and size fixed with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness, M-45 Grade all as specified and directed

80

-

-

... More
M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

1.76

-

-

... More
Dissmantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed

460

-

-

... More
M & L 595mm x 595 mm false ceiling system, using hot dipped galvanised steel section exposed surface with precoated capping GI powered coated tee and cross tee of size 24x32mm & 24x27mm having 0.27 mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is to be suspended at every 1200mm c/c in both direction using 2mm thick pre straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS 14862) of size 595x595mm and ant line of the design (cascadev or electra) back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed by EIC (Make Everest or equivalent) Note : Grid & board of shall be of the same make

460

-

-

... More
M & L for treating the soil under plinth protection at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and directed

105

-

-

... More
M & L for ATT post construction treatment of soil under existing floor using emulsion as per manufacturer instruction @ 1 ltrs per hole 300mm apart incl drilling and plugging 12mm dia holes with cement mortar 2:2 (1 cement 2 coarsse sand ) to match the exsiting floor complete all as specified and directed

150

-

-

... More
M & L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

105

-

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises.

50.4

-

-

... More
M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed.

579.25

-

-

... More
M&L Non skid ceramic tiles (Rectified/square tiles) of 7 to 10 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:6 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed.

440

-

-

... More
M&L Non skid ceramic tiles (Rectified tiles) of 7 to 10 mm thick (square/ rectangular) area of each the exceeding 0.18 sqm but not exceeding 0.38 sqm,of approved 1st quality in skirting/dado etc with screed bed or bedding layer 10mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as specified and directed.

44

-

-

... More
M&L Glazed Ceramic tiles coloured, of size 450mmX350mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Note: PVC tile beading to be done at external corners along the edge of the tile and the cost is included in rate quoted above.

58

-

-

... More
M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

8

-

-

... More
Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

7.5

-

-

... More
M&L 18-20 mm thick Sadarahalli Stones slab (of any type), in floors, steps,Skirting and risers etc any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

105

-

-

... More
Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

32

-

-

... More
Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

20

-

-

... More
S&F Factory made single extruded coloured WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for Single rebate) of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

96

-

-

... More
S&F Factory made single extruded coloured WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat (for double rebate) of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

19.2

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer coloured Composite) solid plain flush shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

40

-

-

... More
S&F Factory made single extruded WPC (Wood Polymer coloured Composite) skeleton or glazed door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges, wiremesh or glass and necessary S S screws shall be paid separately)

8

-

-

... More
S&F 100 mm long SS Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC door frame along with strong adhesives to Brass screws for fixing complete all as specified and directed

60

-

-

... More
S&F Factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories is included and packing the gaps with silicon sealent complete all as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

52

-

-

... More
Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each

0.75

-

-

... More
S & F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having w multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

1.08

-

-

... More
M & L MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

255

-

-

... More
S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed

20

-

-

... More
S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed

40

-

-

... More
S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

20

-

-

... More
S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed

20

-

-

... More
S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed

20

-

-

... More
Supply only Wire netting of stainless steel wire 1.4mm dia size of mesh 25mm fixed with tinned tacks of 'stainless steel wire staples for skeleton shutters etc complete all as specified and directed

23.04

-

-

... More
S&F 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty exc 0.5sqm in each pane complete all as specified and directed.

24

-

-

... More
S&F in repairs 25 mm dia Stainless steel curtain rods with fixing brackets, End caps, stops, rollers etc.and taking down old pipe complete all as specified and as directed

36

-

-

... More
Dismantling of existing PVC 500-1000 ltrs water tank complete all as specified and directed.

3

-

-

... More
S&F 1000Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified and directed.

3

-

-

... More
S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

3

-

-

... More
S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.

6

-

-

... More
Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

18

-

-

... More
All same as per item No.43 here in before but 20 mm bore.

27

-

-

... More
S&F 16mm CPVC pipe outer dia with SDR 13.5 pipes & plain CPVC SDR 11 fittings fittings in trenches, floors, walls etc complete all as specified and directed.

18

-

-

... More
All as per item No.45 above but 20mm bore.

27

-

-

... More
M & L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth

12

-

-

... More
Providing, fixing, and commissioning of a Vitreous China Wash Hand Basin of size 550 mm to 600 mm in [White / Glossy / Ivory] finish, complete with a matching Vitreous China Full/Half Floor-Mounted Pedestal, manufactured from premium scratch-resistant and non-porous ceramic. The unit shall be wall-hung and securely anchored, with the pedestal providing stable floor-mounted support and concealing all internal plumbing in repairs complete all as specified and directed. Make: Parryware or equivalent

3

-

-

... More
S&F in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. Make: Prayag/Parryware or equivalent.

3

-

-

... More
S&F in repairs 32mm Dia PVC waste pipe for sinks/urinals/ wash basins complete all as directed and specified.

3

-

-

... More
S&F 650x450 mm frame less bevelled edge mirror of selected quality glass and fixed with CP scews and cup washers in repairs complete all as directed by the Engr-in-Charge.

3

-

-

... More
S&F in repairs 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make: Prayag or quivalent in other make.

3

-

-

... More
S&F in repairs 32mm CP Bottle traps for washbasin/urinal outlet Make: Prayag or equivalent in other make complete all as specified and as directed

3

-

-

... More
S&F Counter top wash hand basin oval shaped 550x430x195mm incl waste copuling, waste pipe complete all as specified and directed. Make: Parryware or equivalent

3

-

-

... More
S&F in repairs for Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed

6

-

-

... More
S&F Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

6

-

-

... More
Supply and fix 15 mm bore PVC connection pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

6

-

-

... More
S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and directed.

3

-

-

... More
S&F in repairs brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed Make : Prayag/Parryware or equivalent

3

-

-

... More
S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted to pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent

3

-

-

... More
S&F 15mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make: Prayag/Parryware or equivalent.

6

-

-

... More
S&F in repairs Acrylic Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as directed

3

-

-

... More
S&F in repairs CP Towel ring complete all as specified and directed

3

-

-

... More
S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in all as specified and directed.

3

-

-

... More
S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed

3

-

-

... More
S&F Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

3

-

-

... More
S&F in repairs Stainless Steel Pegset of 4 No Pegs fixed withand including CP brass screws and wooden/Plastic cleats and fixed complete all as specified and directed.

3

-

-

... More
S&F SS Grating round 140 mm dia (Minimum weight 50gms) and fixed in repairs all as specified and directed.

3

-

-

... More
S&F SS Grating doom 125 mm dia with waste hole (Minimum weight 40gms) and fixed in repairs all as specified and directed.

3

-

-

... More
Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

34

-

-

... More
S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

3

-

-

... More
S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

9

-

-

... More
S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

3

-

-

... More
S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

25

-

-

... More
S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

3

-

-

... More
S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

3

-

-

... More
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

3

-

-

... More
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar, complete all as directed

2

-

-

... More
M&L Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

2

-

-

... More
M&L Reinforced concrete pipes, class NP3 150mm bore, laid and jointed complete with collars etc complete all as specified and as directed

15

-

-

... More
Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

200

-

-

... More
M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed.

100

-

-

... More
M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

100

-

-

... More
M&L preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer and chalk whiting with using of all fixtures which are necessary for execution of work and leaving premise,clean and tidy all as specified & directed

100

-

-

... More
M&L Complete removal of existing treatment on walls complete all as specified and as directed.

1102.5

-

-

... More
M&L for two coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

630

-

-

... More
M & L for Preparing of old/new plastered surfaces of stone/brick and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified

472.5

-

-

... More
M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint with using of all fixtures which are necessary for execution of work and leaving premise,clean and tidy all as specified & directed

12

-

-

... More
M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint with using of all fixtures which are necessary for execution of work and leaving premise,clean and tidy all as specified & directed

25

-

-

... More
M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge.

6

-

-

... More
M & L for providing and fixing stainless steel (Grade 304) railing made of hollow/square tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includin fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed

860

-

-

... More
S & F Solid UPVC / PVC Wall Lining decorative type consisting of 10mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

70

-

-

... More
S & F 5mm thick UPVC / PVC sheet fillet of width35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

24

-

-

... More
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface as per site requirement complete all as specified and directed by Engr-in-Charge.

122

-

-

... More
Taking down existing unserviceable MCCB/main switch (any type and capacity) and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.

1

-

-

... More
Taking down existing unserviceable distribution board with MCBs, switch fuse unit, enclosure and making good the disturbed surface of walls including paint touchup to match with the existing surfaces complete all as specified and as directed by the Engineer in charge.

4

-

-

... More
Taking down Existing old unserviceable submain wiring of any description /type size and removal of UNSV material from site and making good the disturbed surface of walls / ceiling so as to match with the existing finishes all as specified and as directed by the Engineer -in- charge .

150

-

-

... More
M&L for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, concealed wiring terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR ITEM NO. 5,6,7 :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes and PVC conduits to required depth & making good the disturbed surface in CM 1:4 including core cutting whwrever required and finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

-

-

-

... More
One light point controlled by one, 1 way switch

25

-

-

... More
One 3 pin 6 Amps socket point controlled by one switch on same board

2

-

-

... More
One 3 pin 6 Amps socket point controlled by one switch on independent board

2

-

-

... More
One ceiling fan/exhaust fan point controlled by one 1way switch

18

-

-

... More
All as per item No. 198 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
All as per item No. 198 here-in-before but with 4 sq mm size FR-LSH PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 15A sockets/ earth plus sockets for ACs and geysers

5

-

-

... More
M&L in replacement for point wiring with 1.5 Sqmm (nominal area) multi stranded copper conductor, single core, FR-LSH PVC insulated & unsheathed cable with proper colour coding subjected to IS 732, 1100 volts grade drawn in ISI marked MMS non-metallic PVC conduit of size not less than 20mm dia conforming to IS 9537:latest, surface type terminated in sunken type GI sheet metal flush boxes of 16 Gauge including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FR-LSH PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE FOR ITEM NO.8,9,10:- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. If the building is stone masonry, diamond tools must be used to cut the surfaces. In case the box needs to be put on surface, prior approval must be taken from the Engineer-in-charge and high impact ABS plastic boxes with minimum 1mm thickness shall be used instead of metal boxes. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision and installation of conduits, covering sunken boards/terminal boxes / junction boxes of any shape and size modular white colour cover plate with frame and modular metal flush box. All metal boxes and plates to be of the same make as the switches mentioned in this schedule.

-

-

-

... More
a) One light point controlled by one, 1 way switch

12

-

-

... More
b) One 3 pin 6 Amps socket point controlled by one switch on same board

1

-

-

... More
c) One 3 pin 6 Amps socket point controlled by one switch on independent board

2

-

-

... More
d) One ceiling fan/exhaust fan point controlled by one 1way switch

7

-

-

... More
e) One bell point controlled by one switch

1

-

-

... More
All as per item No. 8 here-in-before but with 2.5 Sqmm for 3 pin 6 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
All as per item No. 8 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
M&L in replacement for point wiring with 1.5 sq.mm FRLSH insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn through existing concealed MS/PVC conduit upto 32mm including FRLSH, PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor as per proper colour coding and pressed steel terminal boxes made out of 1.6 mm thick MS sheet box with 3mm thick laminated hylam sheet fixed with cadmium plated screws for mounting switches, sockets, fan regulator, etc including all accesories if required making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.

-

-

-

... More
a) One light point controlled by one switch

25

-

-

... More
b) One 3 pin 6 Amps socket point controlled by one switch on same board

2

-

-

... More
c) One 3 pin 6 Amps socket point controlled by one switch on independent board

1

-

-

... More
d) One ceiling fan point controlled by one switch and regulator

10

-

-

... More
e) One bell point controlled by one switch

1

-

-

... More
All as per item No. 104 here-in-before but with 2.5 Sqmm for 3 pin 6 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
All as per item No. 104 here-in-before but with 4 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
M&L in replacement for submain wiring alongwith earth wire with 3 x 4.0 Sqmm FRLSH PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC casing capping recessed in wall and its all accessories of suitable size complete all as specified and directed by Engineer-in-Charge. Note: Three runs of 4.0 Sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

40

-

-

... More
All as per item No. 107 here-in-before but with 5 x 10.0 sqmm FRLSH PVC insulated copper conductor cable complete all as specified and directed by Engineer-in-Charge. Note: Four runs of 10.0 Sqmm copper cable and 1 run of copper earth wire shall be measured as one unit length.

30

-

-

... More
M&L for submain wiring along with earth wire with 3 x 6.0 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through existing PVC Conduit in wall/roof surfaces complete all as specified and directed by Engineer-in-Charge. Note: Two runs of 6.0 Sqmm copper cable and 1 run of copper earth wire shall be measured as one unit length.

80

-

-

... More
S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

97

-

-

... More
Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

185

-

-

... More
Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

30

-

-

... More
Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

50

-

-

... More
Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

30

-

-

... More
S&F modular metal flush box 3 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

8

-

-

... More
S&F modular metal flush box 4 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

8

-

-

... More
S&F modular metal flush box 6 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

5

-

-

... More
S&F modular metal flush box 8 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

5

-

-

... More
S&F modular metal flush box 16 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

8

-

-

... More
S&F modular metal flush box 18 module including taking down the existing and depositing to E/M store and any civil work required to make good the disturbed surface complete all as specified and directed by Engr-in-charge.

6

-

-

... More
Supply and fixing of modular cover plate white with frame complete for 3 module complete all as specified and directed by Engr-in-charge.

8

-

-

... More
Supply and fixing of modular cover plate white with frame complete for 4 module complete all as specified and directed by Engr-in-charge.

8

-

-

... More
Supply and fixing of modular cover plate white with frame complete for 6 module complete all as specified and directed by Engr-in-charge.

5

-

-

... More
Supply and fixing of modular cover plate white with frame complete for 8 module complete all as specified and directed by Engr-in-charge.

5

-

-

... More
Supply and fixing of modular cover plate white with frame complete for 16 module complete all as specified and directed by Engr-in-charge.

8

-

-

... More
Supply and fixing of modular cover plate white with frame complete for 18 module complete all as specified and directed by Engr-in-charge.

6

-

-

... More
S & F earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, C Curve 20A, 240 Volts as per all as specified and directed.

7

-

-

... More
Taking down existing 2’ x 2’ LED panel light fittings from false ceiling and refixing the same at revised location in new false ceiling, including disconnection, reconnection, minor wiring extension, connectors, testing and commissioning complete.

40

-

-

... More
Supply & fixing in replacement of high efficacy recess luminaire suitable for armstrong/grid ceiling with high brightness LEDs and PMMA extrured diffuser giving glare free light and good aesthetic appeal 35/36 W LED (2ft X 2ft) lumens not less than 120 Wcomplete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

28

-

-

... More
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, luminous efficiency > 110 lm/watt, surge protection upto 4kV, 440V High voltage protection, power factor > 0.95, CRI > 80 including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface all as specified and directed.

49

-

-

... More
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt lumens not less than 110 W 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

1

-

-

... More
Dismantling, shifting and refixing of existing split type air conditioner unit of any capacity from existing location to new location as directed, including safe disconnection of electrical supply, pump down/recovery of refrigerant wherever feasible, dismantling of indoor and outdoor units, copper refrigerant piping, drain piping, control/power cabling and supports/brackets, shifting the units to new location, refixing indoor and outdoor units with suitable brackets/supports, providing/reusing copper piping, insulation, drain pipe and control cabling as required, making electrical connections, vacuuming, leak testing, gas charging/top-up if required, testing and commissioning complete all as specified and directed.

2

-

-

... More
Supply and fix in replacement distribution board double door type VTPN 8 way sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
Supply and fixing in replacement MCCB 125 Amp three pole 415 Volt , breaking capacity 25 KA, ICS = 100% ICU, Adj thermal and Adj magnetic with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.

1

-

-

... More
Supply and fix in replacement distribution board double door type TPN 4 way sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
S&F in replacement MCB Triple pole and Neutral (TPN) of capacity 40-100 Amps 415 volts ,breaking capacity 10 KA,'C' series ,fixed in proper position all as directed by the Engineer in charge .

1

-

-

... More
Supply and fix MCB distribution board single door type SPN 12 way sheet steel powder painted with bus bar ,neutral link & earth bar etc.with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing circuit complete all as specified and directed by Engineer-in-Charge.

1

-

-

... More
All as per item No. 136 above but of SPN 8 way.

2

-

-

... More
Supply and fix in replacement MCB, SPN, 40-63 Amps, 240 Volts

5

-

-

... More
S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

40

-

-

... More
M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

2

-

-

... More
Supply and fixing LED building security light fitting 35Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

6

-

-

... More
Disconnecting ceiling fans of any sweep and from any height including electrical connections, bringing down, dismantling, opening up, cleaning internally and externally, overhauling by replacing unserviceable items such as split pins, bearings, bushes, copper flexible cord, cotter pins and check nuts etc, lubrication with approved lubricants, reassembling including replacement of worn-out /defective parts and refixing for smooth functioning and connecting cable from ceiling rose to fan including testing complete all as specified and directed by the Engineer-in-charge.

18

-

-

... More
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories without remote, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated as per latest BEE norms in vogue at the time of supply with brushless direct current motor (BLDC) complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S&F 400mm swing wall fan, 4star, smooth oscillation, copper motor with remote control, 5 speeds, metal body complete all as specified and directed by Engr-in-charge.

2

-

-

... More
S&F exhaust fan of sweep 250mm, plastic body , power consumption not to exceed 25watt, AC single phase 230V, 50Hz, copper winding complete all as specified and directed

3

-

-

... More
Supply and fix in replacement Exhaust fan, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed by Engr-in-charge

2

-

-

... More
Supply and fix XLPE insulated armoured heavy duty electric cable with aluminium conductor, ISI marked, 1100 volts grade of cross sectional area 70 sqmm 3.5 core complete all as specified and directed

200

-

-

... More
Excavation in trenches not exc 1.5 wide and not exc 1.5 mtr deep and getting out in hard /dense soil for laying pipes complete all as specified .

48.6

-

-

... More
Supply and fill riddled soil obtain from excavated soil upto depth of 30cm (8cm below cable and remaining above cable) for cushioning of cable complete in respect all as specified and as direcred by Engr-in-Chrage. Note :Excavated soil shall be riddled by using sieve to seperate composite particles etc as per IS 1255:1983 and refilling in trenches as in cable cushioning.

14.58

-

-

... More
Returning and filling in soils , including spreading ,levelling ,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed .

32.22

-

-

... More
Removal of excavated material to a distance not exc 50 mtr away from starting point and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed .

16.38

-

-

... More
Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed by the Engineer-in-charge

1200

-

-

... More
Supply and lay GI pipe light grade 50mm dia laid in trenches/concealed in wall for cable protection complete all as specified and directed by Engr-in-chagre.

15

-

-

... More
Material and labour for cutting of road / hard standing 0.3 mtr wide and 0.3 mtr deep for laying and taking out water pipe line including making good the disturbed portion as per existing earlier complete all as specified and directed .

8

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.