Jawaharlal Nehru Technological University Tender

na;Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Cassette Air-Conditioner including foaming etc., complete. 1. 3/4" x 3/8" or 2. 5/8" x 1/4" or 3. 1/2" x 1/4"

na;Supply,Transportation & Installation of Slim line / Tower Model/Verticool type split AC unit with 100% copper indoor unit and floor mounted outdoor condensing unit Hermetically sealed Scroll compressor suitable for operation on AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units etc complete with cordless remote control with 2 years warranty and annual maintenance contract. 4.0 / 3.8 TR Three Phase capable of delivering 45600 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes: Daikin / Blue Star / Carrier or equivalent including outdoor MS bracket suitable for fixing outdoor unit of AC unit.

na;BLDCSTNProviding and applying (Two coats ) of Wall Putty of white cement or polymer or cement based (Water Resistant) to interior faces of new walls and ceiling of approved colour as per manufacturers

na;Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work including cost and conveyance of all materials and labour charges

na;Supply and fixing Teak Wood framed FLUSH Doors single shuter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Powder Coated/ Chromium Plated Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No Aluminium tower bolt of 250x12mm dia, 1 No. Aluminium Aldrops - 300 mm long, 1 No Flat Latches: 200 mm long and 2 Nos. Aluminium handles of 150 mm size & 1 No. 63 mm long Aluminium door stopper including fixing the fixtures to door with required no.of brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002

na;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) black set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of granite over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, granite, white cement, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.707 & 701) GF

na;S&F premium make wall mirror including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal/external threaded connection conforming to IS 8931 for all floors, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;S&F of 15 mm brass body Premium variety Chromium plated finish Swan neck tap with right/left hand operating knob with aerator of not less than 500 grams weight quarter turn spindle conforming including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tubeand wall hook with 10 yearswarranty including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;Supply & fixing of PVC low level system with internal components & short bend: 10 liters capacity Dual Flush including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;S&F of Towel rod 24 " premium make powder coated stainless steel body with 10 years including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;S&F CP finish brass body 32 mm dia nominal size waste coupling doom type with half/ full thread & brass body check nut conforming to IS 2963: 1979 including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) GF

na;Reinforced Brick Masonry for partition walls (115 mm thick) in CM (1:6) prop. (Cement : Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 509 & 501) GF

na;Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, etc. complete for finished item of work in all respects.

na;Supply of Tractor in JNTUH Campus to clean the unwanted materials, debris, manure etc. with help of labour including cost and conveyance chagres complete dump in the dumping yard with help of tractor at JNTUH, Kukatpally, Hyderabad

na;Dadooing to walls with glazed red or white full body ceramic wall tiles of size 1200 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work.

na;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete, curing etc., complete for finished item of work. (APSS No. 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX

na;Painting to walls with 2 coats of acrylic emulsion paint of approved brand and shade after thoroughly rushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work as per SS 911 for external walls for:-Internal Colouring - acrylic emulsion paint - 2 Coats

na;S&F Stainless steel 5" square Grating for nahany or floor trap cover with cockroach trap with or without hole including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complee for finished item of work

na;Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Coloured - Grade - I/ Grade - II

na;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc.,(APSS No.707 & 701)GF

na;Flooring with Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc.,(APSS No.707 & 701)GF

na;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, excluding seigniorage charges and all operational, incidental, labour charges, such as mixing cement complete for finished item of work.FF

na;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 110mm dia

na;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) 75mm dia

na;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials and operational, ncidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including providing 4" coving with cement concrete in (1:2:4) prop. rounding off the wall and slab junction etc., complete for finished item of work. (APSS No. 901 & 903) for:-Impervious coat CM(1:3), 20mm FF

na;Providing specialized high performance acrylic polymer modified elastomeric cementitious waterproof coating to the terrace / walls / internal portion of the bathroom & toilets / internal portion f the water tanks duly cleaning of the surface from dirt, dust and other contaminations, providing and application of Two coats of High performance Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg /Each Coat )

na;Demolishing and disposal of Unreinforced cement concrete more than 15 cm thickness including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed

na;Dismantling/ Removing floor tiles/pan tiles or Mangalore tiles over flat tiles 15 meters lead. including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work

na;Perforated wall panels channeled wood works sheets of width 128 mm, thickness of 16mm and length 2440 mm made of a high density particle board substrate with a laminated facing as per the approved shade/ species & finish and a melamine balancing layer on the reverse side, with a special perforation pattern fluted perforation on the visible surface with a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476 with a ?tongueand- grooved? edges and the back of the perforated panel is with sound absorbing nonwoven acoustical fleece

na;Flooring with Vitrified tiles of Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 1800 x 1200 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.707 & 701)

na;Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work including cost and conveyance of all materials and labour charges

na;Supply of Venetian blinds roller blinds wide with allaccessories. including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work

na;Painting to old Iron works with 1 coats of approved synthetic enamel paint of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to Old Iron Work - 1 coat

na;Painting to old wood works with 1 coats of approved synthetic enamel paint of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to wood work - Synthetic enamel paint to Old Wood Work - 1 coat

na;Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete including of Painting with Acrylic emulsion paint of dulux supreme 3 in a or equivalent brand to interior faces of new walls and ceiling with two coats of approved make, shade and colour over a base coat of primer approved make including cost and conveyance of materials like Acrylic emulsion etc., to site and labour charges such as preparing the wall, applying primary coat, applying two coats of Acrylic emulsion etc., sales and other taxes on cost of all materials, complete for finished item of work in all floors as directed by Engineer-in-charge.

na;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overhead & contractor's profit complete for finished item of work as per India Gypsum Ltd specification.