Jawaharlal Nehru Technological University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
196831Bid Award Id
ViewTender No
JNTUH/ED/HBD/3812/2020-21, Dated 30-09-2020Tender Authority
Jawaharlal Nehru Technological University ViewPurchaser Address
-Website
http://https://jntuh.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
na;Supply and Laying of 10 Sqmm 4 core XLPE / PVC Armoured alluminium cable 1.1 KV grade, underground cable, the cable shall be laid on wall / existing pipe with necessary fixing arrangements such as saddles, clamps, wooden separators etc., (as directed by departmental officials) including cost and conveyance of materials and labour charges etc., complete. The cable shall conform to IS 1554/Part I. Makes RPG / Polycab / Fonolex / Havells.
450
-
97416
na;Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering.
279
-
29163.87
na;Supply and Run of 25mm X 6mm GI Strip including cost of all accessories and labour charges etc., complete.
45
-
6336.45
na;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. Long connected with reducer providing G.I funnel with mesh enclosed in C.C. Chamber of 400mm x 400mm x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm lenght wtih all acessories and labour charges complete, as per IS specifications 732/1982 (Part II).
2
-
13898.56
na;Supply, fabrication, errection and commissioning of cubical panel board of size floor mounted. The panel shall be fabricated with 14/16 gauge CRCA sheet steel enclosure for power control cubicle panel / boxes etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials and labour charges. The pannel board shall consists of following switch gear. 1) 125 A FP MCCB - 1Nos & 80 A FP MCCB - 1 NO as incommer 2) 63 FP MCB - 4 Nos, 3) 40A FP MCB - 4 Nos, 5) Digital Ammeter and Voltmeter, 6) Selector Switches and LED Indicator Set, 7) Current Transformers and 8) Copper Busbar.
2
-
230852.58
na;Supply & laying of 35 Sqmm 3.5 Core XLPE insulated, 1100V gradearmoured alluminium cable as per specification confirming to IS:7098 (Part - I) o fMakes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon
180
-
59977.8
na;Supply & laying of 50 Sqmm 3.5 Core XLPE insulated, 1100V gradearmoured alluminium cable as per specification confirming to IS:7098 (Part - I) of Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon
180
-
77770.8
na;Supply, Transportation, Installation, Testing and commissioning of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with ABS plastic body of 25 Ltrs capacity to withstand up to 8.0 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided hose pipe, testing and all labour charges etc., complete.Makes : Crompton Solarium BLX / Jaquar Elena / Venus Lyra / Racold Eterno Swift / Racold Andris Lux Plus / AO Smith HSE SDS / AO Smith HSE SES / Havells Puro Turbo
50
-
757144.5
na;Supply and fixing 4 way VTPN - Vertical type Distribution board with IP - 43 Protection (Metal Door) with 4 Pole 40 Amps MCB 16kA as incomer 12 nos (6-32) A SP MCBs as outgoing including internal connection and labour charges for surface / flush mounting etc., complete. of Legrand / Schneider / Siemens / L&T / Hager / Cabtree Xpro.
2
-
34193.58
na;Supply and fixing 8 way VTPN - Vertical type Distribution board with IP - 43 Protection (Metal Door) with 4 Pole 63Amps MCB 16kA as incomer 24 nos (6-32) A SP MCBs as outgoing including internal connection and labour charges for surface / flush mounting etc., complete. of Legrand / Schneider / Siemens / L&T / Hager / Cabtree Xpro.
2
-
45730.04
na;Supply and Fixing of Switch Dummys of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
36
-
675
na;Supply and fixing of 2 modular switch controled board galvanized metal box with modular cover frame including all labour charges etc complete (for light points) of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
18
-
2631.96
na;Supply and fixing of 3 modular switch controled board galvanized metal box with modular cover frame including all labour charges etc complete (for light points) of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
54
-
10392.84
na;Supply and fixing of 4 modular switch controled board galvanized metal box with modular cover frame including all labour charges etc complete (for light points) of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
18
-
4116.78
na;Supply and fixing of 6 modular switch controled board galvanized metal box with modular cover frame including all labour charges etc complete (for light points) of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
260
-
81234.4
na;Supply and fixing of 8 modular switch controled board galvanized metal box with modular cover frame including all labour charges etc complete (for light points) of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
27
-
10696.86
na;Supply and fixing of 12 modular switch controled board galvanized metal box with modular cover frame including all labour charges etc complete (for light points) of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
45
-
21595.95
na;Supply and Fixing of 20A Modular Socket with shutter Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
54
-
9178.38
na;Supply and Fixing of 16/ 20A 1 Way Modular Switch of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
54
-
5668.92
na;Supply and Fixing of 6A 3/2 pin Modular Socket of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
520
-
61089.6
na;Supply and fixing of 6A / 10A 1 Way 1 Module Modular Switch of Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
808
-
63621.92
na;Supply, Transportation and Fixing of 12" (300mm) 250V light duty ISI mark of make Crompton / Havells Ventilair-DB / Orient hill air , exhaust / Fresh Air fan with metallic body and blades including making hole in wall and masonry work and all labour charges etc., complete
36
-
71435.52
na;Supply and fixing of 2 Module Modular type Electronic Fan Regulator Makes : Legrand Myrius / Million mway /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / Hager Insista
279
-
132151.14
na;Supply, Transportation & installation of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM(tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient
279
-
931860
na;Supply and fixing of 1 x 11W Mirror light with all standard accessories diffuserMakes : G.E. / Phillips / Crompton / Bajaj.
18
-
15584.4
na;Supply and fixing of 9W LED Lamp with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base along with angle/batten holder. Makes: Phillips / OSRAM / Crompton / Eveready / Bajaj / Havells / Pharox / Halonix / Greenlites / IB LED/ Jaquar / C&S / GM / / FIEM / Gold Medal / Million / Syska including batten holder/Angle Holder
45
-
13755.6
na;Supply, transportation and installation of 18- 20W, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF?0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI?80,.etc complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
369
-
367966.8
na;Supply and Run of 4 of 140/0.3mm (10.0 Sq.mm) with Run 1 of 56/0.3mm (4.0 Sq.mm) (FRLS) / HFFR P.V.C. insulated flexible ISI mark copper cable of Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). in existing pipe for run of mains including all labour charges etc., complete.
270
-
139617
na;Supply and Run of 4 of 84/0.3mm (6.0 Sq.mm) with Run 1 of 36/0.3mm (2.5 Sq.mm) (FRLS) / HFFR P.V.C. insulated flexible ISI mark copper cable of Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). in existing pipe for run of mains including all labour charges etc., complete.
270
-
95928.3
na;Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) with Run 1 of 23/0.3mm (1.5 Sq.mm) (FRLS) / HFFR P.V.C. insulated flexible ISI mark copper cable of Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR).in existing pipe for run of mains including all labour charges etc., complete.
990
-
144648.9
na;Supply and Run of 2 of 36/0.3mm (2.5Sq.mm) with Run 1 of 22/0.3mm (1.5 Sq.mm) (FRLS) / HFFR P.V.C. insulated flexible ISI mark copper cable of Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR). in existing pipe for run of mains including all labour charges etc., complete.
1530
-
177036.3
na;Wiring with 2 runs of 22/0.3mm (1.5Sq.mm) (FRLS) / HFFR P.V.C. insulated flexible ISI mark copper cable of Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR) in existing concealed pipe with Ceiling Rose including all labour charges etc., complete for light, Fan, Exhaust Fan and bell points in Buildings for more than 5.0mtrs length (for long points).
90
-
71235
na;Wiring with 2 runs of 22/0.3mm (1.5Sq.mm) (FRLS) / HFFR P.V.C. insulated flexible ISI mark copper cable of Makes : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR) in existing concealed pipe with Ceiling Rose including all labour charges etc., complete for light, Fan, Exhaust Fan and bell points in R.B.
558
-
358660.08
na;Supply and Fixing of 32mm dia Medium grade P.V.C. pipe (ISI Mark)of concealed in wall with all required accessories including masonary work for light, fan and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / Austro
180
-
18270
na;Supply and Fixing of 25mm dia medium grade P.V.C. pipe (ISI MARK) on surface with all accessories for fixing on wall like metallic base saddles, screws & including all labour charges etc., complete Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / Austro
1530
-
132620.4
na;Supply and Fixing of 25mm dia medium grade PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.complete.Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / Austro
630
-
61998.3
na;Supply and Fixing of 32mm dia medium grade PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC / Beljin / Champion / Austro
360
-
42498
na;Supply and Fixing of 25mm dia heavy grade PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold/ Polycab / DEC / Beljin / Champion / Austro
2430
-
262002.6
na;Supply of 25mm PPR Ball Valve conforming to DIN Standards 8077/8092 as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
56
-
14168
na;Supply of 25mm x ¾? PPR Male Threaded Adaptor conforming to DIN Standards 8077/8092 as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
112
-
23296
na;Supply of White Cement conforming to IS:8042- 1989 including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
160
-
6400
na;Supplying & Fixing 15 mm nominal size PVC connection with brass union nut C.P coated as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
288
-
33696
na;S & F internal cistern fittings for PVC flush tank as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
64
-
63168
na;Labour charges for removing and refixing the pumber fittingsPlumber ( Licensed ) / Pipe fitter
32
-
21984
na;Removing and refixing wash hand basins/wall mixers of any size with fittings complete as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
144
-
38880
na;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
240
-
90000
na;Constructing Brick masonry support for G.I pipe with C.M 304.8 x 228.6 x228.6 mm size including plastering and finishing etc. complete.
12
-
1068
na;Cutting holes in RCC slab floor & repairs Labour charges only
234
-
28080
na;Cutting holes in Brick masonry & repairs Labour charges only
10
-
800
na;Cutting holes in stone masonry & basement and repairs Labour charges only
10
-
1200
na;Cutting holes in C.C; basement & repairs Labour charges only
10
-
1800
na;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.
10
-
44130
na;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. 5'-0" Depth
2
-
26960
na;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of excluding seigniorage on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. 3'-0" Depth
27
-
228717
na;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of work 202.8 mm (8") dia
20
-
20260
na;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of workg. 152.4 mm (6") dia
20
-
17100
na;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of work 101.4 mm (4") dia
45
-
26640
na;Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 40 mm Nominal Bore
9
-
20637
na;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
6
-
15936
na;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
6
-
7770
na;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 15 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
15
-
10035
na;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, etc., , overheads & contractors profit etc, all taxes, except GST, complete for finished item of work at all floor levels. e) 41.30mm OD pipe
83
-
33449
na;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, etc., , overheads & contractors profit etc, all taxes, except GST, complete for finished item of work at all floor levels. d) 34.90mm OD pipe
62
-
20150
na;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, etc., , overheads & contractors profit etc, all taxes, except GST, complete for finished item of work at all floor levels. c) 28.60mm OD pipe
1037.39
-
247936.21
na;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, etc., , overheads & contractors profit etc, all taxes, except GST, complete for finished item of work at all floor levels. b) 22.20mm OD pipe
1530.65
-
304599.35
na;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, etc., , overheads & contractors profit etc, all taxes, except GST, complete for finished item of work at all floor levels. a) 15.90mm OD pipe
250
-
41000
na;Supplying and fixing Glass frameless mirror and plywood back with CP screws of size 609.6 mm x 457 .2 mm (24" x 18") Indian make best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
15
-
8085
na;Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: including cost of 50mm dia pvc pipe, 12.7 mm PVC connection with brass union nut C.P coated and concealed stop cock 12.7 mm (1/2") etc compete for 550 x 400 mm - Single C.P. Pillar cock
15
-
28545
na;Supply and fixing C.P. soap dish of approved make with screws etc., complete for finished item of work in all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
12
-
7140
na;Supply, installing and commissioning approved make Hindustan / Parry ware with white European Water Closet of Approved Model with P or S trap 1st quality conforming to IS:2556-Part-2-1973 with CI short Connector & thimble pipe, PVC Low Level Cistern fixed on wall above EWC with CP Flush Bend and all internal parts of cistern viz. seat cover of approved make & colour with rubber buffer and cap 15 mm angle stop cock, 450 mm long PVC inter connection pipe, wall flanges all of approved make etc. complete for finished item of work in all respects as directed by the Engineer-in-Charge.
14
-
79996
na;S&F of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931 for all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
24
-
15792
na;Supply & fixing of PVC low level system with internal components & short bend: 10 Liters capacity Single Flush including cost and conveyance of all materials and labour charges etc complete as per standard practice for finished item of work
2
-
3332
na;Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat and CC Squatting plate including cost and conveyance of all materials and labour charges etc complete as per standard practice for finished item of work
4
-
9236
na;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for 76.2 mm (3") dia pipe
140
-
44090.67
na;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) for 101.6 mm (4") dia pipe
417.08
-
191689.97
na;S&F of 15 mm CP finish brass body wall mixer conforming to IS 8931 with centre distance 150 mm conforming to IS 8931 for all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
10
-
22530
na;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931 for all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
10
-
8240
na;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 for all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
35
-
22750
na;Supplying & fixing of 1st quality 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand)
45
-
5175
na;Supplying and fixing 152.40 mm (6") x 101.60 mm (4") SWG gully trap of 1st class traps of ISI make conforming to IS: 651 & IS: 4127with C.I. grating and constructing single brick masonry wall chamber of size 20" x 14" x 12" in CM (1:6) pro. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost & conveyance to site, labour charges, etc. complete for finished item of work. (APSS No 1326)
7
-
5012
na;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for Internal walls - acrylic emulsion paint
3200
-
289280
na;Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead for Brick work for groove cutting inside the shelfs
12
-
36300
na;S&F Rabbit wire mesh (chicken mesh) of not less than 30 gauge including cost and conveyance chagres etc. complete
48.3
-
1062.6
na;Supply of Tractor in JNTUH Campus to clean the debris, manure etc. with help of labour including cost and conveyance chagres complete dump in the dumping yard with help of tractor at JNTUH, Kukatpally, Hyderabad
6
-
3018
na;Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metre lead Not exceeding 3 sq.m. in area including cost and conveyance of all materials and labour charges etc,complete for finished item of work as directed by engineer-incharge.
10
-
2670
na;Supply and fixing of the ply wood Shelf of size 2100x2100 mm with plywood sheet for frame Single layered 18mm thick having shutters single layered is fixed with decolam sheet including cost and conveyance of all materilas such as ply wood sheet, nails, Butt hinges stainless steel 100mm long, stainless steel door handles 150mm long -, magnetic catchers and labour charges for fixing etc. complete for finished item of work as directed by engineer in charge
18
-
89874
na;Supply and fixing of the ply wood Shelf of size 2430x3000 mm with plywood sheet for frame Single layered 18mm thick having shutters single layered is fixed with decolam sheet including cost and conveyance of all materilas such as ply wood sheet, nails, Butt hinges stainless steel 100mm long, stainless steel door handles 150mm long -, magnetic catchers, wood adhesive and labour charges for fixing etc. complete for finished item of work as directed by engineer in charge
36.5
-
222467.5
na;Supply and fixing of the ply wood Shelf of size 2100x2100 mm with plywood sheet for frame Single layered 18mm thick having shutters single layered is fixed with decolam sheet including cost and conveyance of all materilas such as ply wood sheet, nails, Butt hinges stainless steel 100mm long, stainless steel door handles 150mm long -, magnetic catchers and labour charges for fixing etc. complete for finished item of work as directed by engineer in charge
44.1
-
234700.2
na;Supply and fixing of the ply wood Shelf of size 2430x2430 mm with plywood sheet for frame Single layered 18mm thick having shutters single layered is fixed with decolam sheet including cost and conveyance of all materilas such as ply wood sheet, nails, Butt hinges stainless steel 100mm long, stainless steel door handles 150mm long -, magnetic catchers and labour charges for fixing etc. complete for finished item of work as directed by engineer in charge
24
-
129000
na;Supplying and fixing NP-3 class RCC Spun/ Vibrated Cast (Reinforced ) Plain ended pipes and collers, as per site requairements including Lowering the RCC plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with Cement joints including curing, the cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including filling with water with a water lead upto 500 metres as per BIS No.783/85 and cost and conveyance of all materials, labour charges, etc., complete for finished item work
230
-
402960
na;Providing Scaffolding on Hire basis for acess using Casuarinas Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm (Wall Area) including hire charges cost and conveyance of all other consumable accessories, taxes etc complete for finished item of work as directed by Engineer in charge 4th floor
504
-
105840
na;Jointing with Epoxy Floor coating: Hibond floor & protective coatings Epoxy waterproof / damp proof coating to Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm of any colour including cost and conveyance of all materials like cement, epoxy chemicals etc., to site including all labour charges for Jointing in between tiles to required as directed by the Engineer-in-charge curing etc., complete for finished item of work. SF
76.96
-
77960.48
na;Jointing with Epoxy Floor coating: Hibond floor & protective coatings Epoxy waterproof / damp proof coating to Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm of any colour including cost and conveyance of all materials like cement, epoxy chemicals etc., to site including all labour charges for Jointing in between tiles to required as directed by the Engineer-in-charge curing etc., complete for finished item of work. FF
76.96
-
76036.48
na;Jointing with Epoxy Floor coating: Hibond floor & protective coatings Epoxy waterproof / damp proof coating to Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm of any colour including cost and conveyance of all materials like cement, epoxy chemicals etc., to site including all labour charges for Jointing in between tiles to required as directed by the Engineer-in-charge curing etc., complete for finished item of work. GF
76.96
-
74266.4
na;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: (cement : Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50): Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, mixing, laying concrete, curing but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX TF
0.72
-
4704.48
na;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: (cement : Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50): Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, mixing, laying concrete, curing but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX SF
0.5
-
3171.67
na;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: (cement : Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50): Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, mixing, laying concrete, curing but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX FF
0.5
-
3051.72
na;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: (cement : Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50): Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, mixing, laying concrete, curing but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX GF
0.5
-
2930.76
na;Providing Solar fencing system up to a height of 3'-0" on the compound wall with 4'-0" height poles embedded in compound wall with concrete grouting with with an interval of 10'-0" from pole to pole with 9 Nos stands with linen to line gap is 100mm including fence enerziser, Fence voltage Alarm,Digital voltameter etc., as per the standard specfications of the company. (Blaze Automation Services(Pvt) Ltd., including cost and conveyance of all material and labour charges etc. complete for finished item of work as directed by engineer-in-charge.
252
-
189000
na;Supplying and fixing stainless steel hand railing, balustrade etc using 304 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" high from ground level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials buffing charges polishing charges etc complete for finished item of work. (50mm dia @4.57kg/Rmt, 40mm dia @3.61kg/Rmt and 25mm dia @2.46kg/Rmt
16.2
-
135367.2
na;Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete (APSS No.1200, 1207 & 1211) in all floors.
818
-
156238
na;Painting to new wood work with luppam finish, including applying metal paste coat to give even & smooth surface and painting two coats of synthetic enamel paint 1st grade of approved brand and shade to get glossy surface including cost and conveyance of all materials to site, all taxes and all labour charges etc. complete including sand paper on lappam coats for neat even and glossy surface etc. complete for all floors for finished item of work as directeda by Engineer-in-charge during exection.
297
-
81081
na;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
3019
-
812111
na;Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls for:-Internal Colouring - Providing Putty to Internal walls
4572.4
-
1069941.6
na;Supply and fixing door shutter with frame made out of PVC section and panels conforming to IS:10151-1982 having panel sizes of 100 mm x 30 mm with self extruded grooves at 40 mm x 50 mm grooves on front face and the infill panel dimension is 610 mm x 20 mm seamless hallow multi chambered PVC single panel for finished item of work
36.2
-
97848.6
na;Supply and fixing Teak Wood framed FLUSH Doors single shuter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Powder Coated/ Chromium Plated Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No Aluminium tower bolt of 250x12mm dia, 1 No. Aluminium Aldrops - 300 mm long, 1 No Flat Latches: 200 mm long and 2 Nos. Aluminium handles of 150 mm size & 1 No. 63 mm long Aluminium door stopper including fixing the fixtures to door with required no.of brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (0.90x2.15)
110
-
678370
na;Supply and fixing Teak Wood framed FLUSH Doors double shutter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1 No Flat Latches: 200 mm long and 1 No. fancy handles of 150 mm size & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (1.80x2.40)
22
-
109934
na;Providing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position including cost of Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position etc. complete for finished item of work.
12.78
-
1351817.28
na;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Top Hung 2 '-0 x 2'-0 (609.6x609.6mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm and (ii) Ventilators: Top Hung 4 '-0 x 2'-0 (1219.2x609.6mm) outer frame section size of 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm and (iii) Ventilators: Top Hung 4 '-0 x 3'-0 (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 mm
17.2
-
137496.8
na;Supply and fixing of pre-painted steel casement/ openable windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutter 4'-0 x 4 '-0 (1219.2x12.19.2mm) without Mullion section
66.6
-
499500
na;Providing 16 to 18mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing charges etc., to site, but excluding seigniorage charges on all materials etc., complete for finished item of work. Treads of 0.3 m height SF
43
-
298028.7
na;Providing 16 to 18mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing charges etc., to site, but excluding seigniorage charges on all materials etc., complete for finished item of work. Treads of 0.3 m height FF
43
-
290370.4
na;Providing 16 to 18mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads, polishing charges etc., to site, but excluding seigniorage charges on all materials etc., complete for finished item of work. Treads of 0.3 m height GF
63
-
414212.4
na;Providing 16 to 18mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges etc., to site, but exclding seigniorage charges on all materials etc., complete for finished item of work. Risers of 0.15m height SF
4
-
18727.6
na;Providing 16 to 18mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges etc., to site, but exclding seigniorage charges on all materials etc., complete for finished item of work. Risers of 0.15m height FF
4
-
18479.2
na;Providing 16 to 18mm thick high polished granite stone slabs other than black and premium colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges etc., to site, but exclding seigniorage charges on all materials etc., complete for finished item of work. Risers of 0.15m height
9
-
41019.3
na;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ Premium colours set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, granite, white cement, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 & 707) SF
6
-
29808
na;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ Premium colours set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, granite, white cement, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 & 707) FF
6
-
29256
na;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black/ Premium colours set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, granite, white cement, cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 & 707) GF
22
-
105270
na;Dadooing to walls with glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. SF
138
-
121854
na;Dadooing to walls with glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. FF
138
-
120198
na;Dadooing to walls with glazed red or white full body ceramic wall tiles of size 300 x 600 mm and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. GF
77
-
66143
na;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.707 & 701) SF
64
-
65792
na;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.707 & 701) FF
64
-
62592
na;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.707 & 701) GF
25
-
23200
na;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like (Cement, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 &707) The skirting should flush online with plastering. SF
44
-
52008
na;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like (Cement, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 &707) The skirting should flush online with plastering. FF
44
-
49808
na;Skirting with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like (Cement, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 &707) The skirting should flush online with plastering. GF
19.2
-
20774.4
na;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like (Cement, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 & 707) SF
295
-
350165
na;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like (Cement, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 & 707) FF
295
-
335415
na;Flooring with Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like (Cement, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, tiles, white cement, all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., to site (excluding cost of C.C. bed) but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No.701 & 707) GF
317
-
344579
na;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water proofing compound, water, all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 901 & 903). TF
526
-
377668
na;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water proofing compound, water, all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 901 & 903). SF
60
-
40440
na;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water proofing compound, water, all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 901 & 903). FF
60
-
37740
na;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water proofing compound, water, all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 901 & 903). GF
143
-
83512
na;Ornamental ceiling plastering 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) TF
36
-
25992
na;Ornamental ceiling plastering 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) SF
358
-
238070
na;Ornamental ceiling plastering 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) FF
358
-
217306
na;Ornamental ceiling plastering 12mm thick using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) GF
375
-
206250
na;External Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) TF
133
-
90839
na;External Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) SF
530
-
334430
na;External Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) FF
530
-
307400
na;External Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) GF
1071
-
565488
na;Internal Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) TF
133
-
90839
na;Internal Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) SF
1316.6
-
830774.6
na;Internal Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) FF
1316.7
-
763686
na;Internal Plastering 12mm thick in two coats using (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all materials, all operational incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing,cutting grooves as directed by Engineer-in-charge etc.,but excluding seigniorage charges on all materials etc., complete for finished item of work. (SS 901,903 & 904) GF
1455
-
768240
na;Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work. (APSS No. of 509) SF
100
-
102000
na;Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work. (APSS No. of 509) FF
100
-
92900
na;Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work. (APSS No. of 509) GF
72
-
60264
na;Masonry work in CM(1:6) prop (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 501 & 504). TF
16.4
-
150174.8
na;Masonry work in CM(1:6) prop (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 501 & 504). SF
133
-
1141539
na;Masonry work in CM(1:6) prop (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 501 & 504). FF
133
-
1065197
na;Masonry work in CM(1:6) prop (Cement : Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), bricks, water, all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges on all materials etc., complete for finished item of work. (APSS No. 501 & 504). GF
257
-
1910795
na;Supplying, fitting and placing (HYSD Fe-500/500D/550D Steel) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work TF
3.9
-
280686.9
na;Supplying, fitting and placing (HYSD Fe-500/500D/550D Steel) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work SF
11
-
774532
na;Supplying, fitting and placing (HYSD Fe-500/500D/550D Steel) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work FF
11
-
757383
na;Supplying, fitting and placing (HYSD Fe-500/500D/550D Steel) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work GF
42.6
-
2866724.4
na;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.for:-Sun Shade-Slab thk 62.50 SF
36
-
38124
na;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.for:-Sun Shade-Slab thk 62.50 FF
36
-
36576
na;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.for:-Sun Shade-Slab thk 62.50 GF
36
-
34956
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - T F-175 mm thick 3.66M Height
23.4
-
50193
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - S F-175 mm thick 3.66M Height
16
-
32944
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - F F-175 mm thick 3.66M Height
16
-
31536
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - G F-175 mm thick 3.66M Height
16
-
30176
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - S. F-150 mm thick 3.66M Height
253
-
467544
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - F. F-150 mm thick 3.66M Height
253
-
448063
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - G. F-150 mm thick 3.66M Height
253
-
428076
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - T F-125 mm thick 3.66M Height
36.3
-
62871.6
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - S F-125 mm thick 3.66M Height
114
-
189240
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - F F-125 mm thick 3.66M Height
114
-
181146
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for SLAB - G F-125 mm thick 3.66M Height
142
-
215414
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS - THIRD FLOOR 3.66M Height
3
-
43479
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS - SECOND FLOOR 3.66M Height
19.7
-
273613.3
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS - FIRST FLOOR 3.66M Height
19.7
-
261694.8
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for BEAMS - GROUND FLOOR 3.66M Height
19.7
-
249756.6
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC WALLS 230MM THICK - THIRD FLOOR
42
-
379050
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for LINTELS - THIRD FLOOR
0.1
-
1697
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for LINTELS - SECOND FLOOR
2.5
-
40295
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for LINTELS - FIRST FLOOR
2.5
-
38170
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for LINTELS - GROUND FLOOR
2.2
-
31719.6
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS - Third Floor 3.66 M Height
3.3
-
57789.6
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS - Second Floor 3.66 M Height
16
-
264775.44
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS - First Floor 3.66 M Height
16
-
249344
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS - Ground Floor 3.66 M Height
46
-
672474
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for Steps FF
0.6
-
6792
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for Steps FF
0.6
-
6458.4
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for Steps GF
4
-
40832
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for Plinth Beams
32.9
-
454118.7
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for Pedestals
5.2
-
60798.4
na;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, (Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), coarse aggregate, water, all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication and seigniorage charges on all materials etc., complete for finished item of work (APSS No. 402) with minimum cement content as per IS code including pumping, centring, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for Footings
164
-
1803672
na;Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ sqm of the vertical surface & @ 5.0 Liters/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge
562.2
-
220494.84
na;Filling with Carted Gravel in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 & 310).
234.48
-
101568.92
na;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
595.6
-
29780
na;Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC : M-15 MACHINE MIX BED BLOCKS, BANDS SF
1.8
-
11737.8
na;Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC : M-15 MACHINE MIX BED BLOCKS, BANDS FF
1.8
-
11359.8
na;Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and excluding seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, for:-Machine Mix-PCC : M-15 MACHINE MIX BED BLOCKS, BANDS GF
17.8
-
108580
na;Raised Pointing to RR/ CRS Masonry in CM (1:3) (cement : Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50) including cost and conveyance of all materials in site, curing, labour charges but excluding seigniorage charges on all materials etc., complete for finished item of work.
173.2
-
21494.12
na;Random Rubble Stone masonry in CM (1:8) prop: (cement : sand) using hard Granite stones from approved quarry including cost and conveyance of all materials like cement, sand water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation & basement. (APSS No. 615 & 601)
221.8
-
946420.6
na;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX
166.4
-
710195.2
na;Earth work excavation for BUILDING foundations for Hard Rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS 20B (APSS 308) ( excavated rock to be stacked and 40% volume to be deducted for voids) for Hard rock (blasting prohibited)-Upto 3 M depth
47.9
-
127375.68
na;Earth work excavation for BUILDING foundations for Ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS 20B (APSS 308) ( excavated rock to be stacked and 40% volume to be deducted for voids) for Ordinary rock (not requiring blasting) Mechanical means -Upto 3 M depth
47.7
-
11771.57
na;Drilling of 18mm dia holes 900mm deep in rock, cleaning the holes manually, supplying and fixing 16mm dia cold twisted bars 1800mm long, 900mm length fixed in drilled hole with approved epoxy bonding agent and 900mm projection above including cost of epoxy, all materials and labour complete as per approved drawing, but excluding the cost of reinforcement and its fabrication as directed by Engineer-in-charge.
42.9
-
30201.6
na;Earth work excavation for BUILDING foundation (for SUMPS, TANKS & Open excavation) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth
58.8
-
6671.6
na;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth
954.5
-
187372.33
na;Conducting soil tests for determining Safe Bearing Capacity (SBC) for BUILDING foundations duly excavating trial pits of size not less than 1.2 x 1.2 x 1.5 M and collecting the Un-disturbed soil samples (UDS) as per the standard code of practice and getting the soils tested in a reputed soil laboratory such as 'Industrial Consultancy Services' of Andhra University or 'Industrial Consultancy services' of JNT University, Vizianagaram and furnish the report to the N.A.C. authorities for ensuring the design bearing pressure at site with that of the actual bearing pressure including making the excavated pit good by refilling to its original state and all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, collecting undisturbed soil sample, sending it to the soil laboratory, furnishing the SBC report etc. complete for finished item of work as per IS: 6403-1981
1
-
6814
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements