Jawaharlal Nehru Technological University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
490796Tender No
JNTUH/ED/CER/4964/2023-24 Dated 11-01-2024Tender Authority
Jawaharlal Nehru Technological University ViewPurchaser Address
-Website
http://https://jntuh.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
NA;CABLE TERMINATIONS (including supply of cable glands and lugs) 3.5 C x 95Sq.mm / XLPE,AL.AR. Cable
155
599
92922.5
NA;Supply, Laying, Fixing and Termination of the 1.1KV grade PVC Insulated, aluminium conductor, Armoured and PVC sheathed cable for the following sizes. The termination shall include gland fixing and lugging with Dowels make copper/aluminium lugs. FOR THE FOLLOWING TYPE OF CABLES : 4 C x 10 Sq.mm AR Cu Cable
700
956
669829.44
NA;Supply, Laying, Fixing and Termination of the 1.1KV grade PVC Insulated, aluminium conductor, Armoured and PVC sheathed cable for the following sizes. The termination shall include gland fixing and lugging with Dowels make copper/aluminium lugs. FOR THE FOLLOWING TYPE OF CABLES : 4 C x16 Sq.mm AR Cu Cable
700
1136
795829.44
NA;Supply and Laying of 95.0 Sqmm 3.5 core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Polycab / Havells / RR kable
115
903
103845
NA;Supply, Laying, Fixing and Termination of the 1.1KV grade PVC Insulated, aluminium conductor, Armoured and PVC sheathed cable for the following sizes. The termination shall include gland fixing and lugging with Dowels make copper/aluminium lugs. FOR THE FOLLOWING TYPE OF CABLES : 3.5 C x 70Sq.mm / XLPE,AL.AR. Cable
230
695
159850
NA;Supply, Laying, Fixing and Termination of the 1.1KV grade PVC Insulated, aluminium conductor, Armoured and PVC sheathed cable for the following sizes. The termination shall include gland fixing and lugging with Dowels make copper/aluminium lugs. FOR THE FOLLOWING TYPE OF CABLES : 3.5 C x 95Sq.mm / XLPE,AL.AR. Cable
1215
1242
1509758.03
NA;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
4
16670
66680
NA;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
6
5836
35016
NA;Supply & laying of following GI/Cu. flat and wires as earthing conductors from equipments to earth stations. The earth strips shall be laid 300mm below ground/ on wall/tray/ceiling with necessary supports as required.All joints in the runs shall be Welded for GI and protected with bitumen paint/Brazed for Cu. Earth flats. The equipment connections shall be bolted with washer using galvanized for GI & brass for Cu. hardware for proper earthling effect.
1500
375
563010
NA;Supply, providing and testing of 3mm thick GI pipe electrode Earth station as per latest IS 3043 complete with 2.5M long, 38mm dia class 'B' reducer, GI pipe funnel with 20SWG GI wire mesh, earth flat clamp & test link. The rate shall include excavation of earth, filling with mixture of soil/salt/charcoal. Brick masonry chamber of 450mm L x 450mm W x 300mm Deep with CI cover etc., Manhole cover with frame shall be painted with bit mastic paint, identification of earth pit with yellow paint below the chamber cover. 38mm dia GI Pipe Electrode Earth Station for Body Earthing of ) ,Metering panels
20
5836
116720
NA;Supply and Fixing of 9" (225mm) Light duty exhaust fan with metal blades etc complete Makes : Crompton / Havells Ventilair-DB / Orient hill air.
18
1596
28729.8
NA;Supply, fabrication, errection and commissioning of floor mounted cubical panel board. The panel shall be fabricated with 16 gauge CRCA sheet steel enclosure for power control cubicle panel / boxes etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials and labour charges. The pannel board shall consists of following switch gear. 1) 250A FP MCCB 35/36KA - 1Nos, 2) 160A FP MCCB 25KA - 1Nos, 3) 125A FP MCCB 25KA - 4 Nos, 4) 63A FP MCCB 16KA - 4 Nos, 5) Digital Ammeter and Voltmeter, 6) Selector Switches and LED Indicator Set, 7) Current Transformers and 8) Copper Busbar.
2
262827
525655.14
NA;LT PANELS : ( SWITCH GEAR MAKE : L&T/C&S/INDOASIAN) Supply, erection, testing and commissioning of LT switch boards. This includes the C channels required to mount the panel or floor mounted with anchor fasteners. MDB, INCOMER 250A, 4P, MCCB of 35KA breaking capacity - 1No, ON,OFF Indication Lamps - 1 No, 2A, Control Fuse - 3 Nos. LED Type R - Y - B Phase Indicating Lamps -3 No's (1 set), 250/5A, CL-.1, 15VA CT's with tape wound - 3 nos, Multi function meter (MFM) OUTGOING FEEDERS 125A, 4P, 25KA - MCCB's - 5No's. BUSBAR RATING 250A, 415V, 3Ph, 4W, 50Hz, 35KA AL BUS.
4
174263
697052
NA;Supplying, drawing and wiring CAT-6 cable with soldered terminals on both ends of 0.61 mm dia. annealed tinned electrolytic grade copper conductor, PVC insulated, twisted pairs bunched together in concentric layers so as to minimize crosstalk and wrapped with melinex tape & overall PVC sheathed suitable for indoor TEL/LAN/TV wiring conforming to ITD-S/WS-113C and S/WS-114 in existing MS conduit on surface/ in recess/ above false and in floor race ways/ceiling etc. complete as required:-
11600
78
906540
NA;Supply, Installation, Testing & Commissioning of Single face plate and Modular co-Axial socket type TV Antenna outlet complete including Backbox cutting, chases, fixing and cable connection entire.
6
452
2717.4
NA;Supply, Installation, Testing & Commissioning of Single face plate and backbox LAN sockets complete including Backbox cutting, chases, fixing and cable connection entire.
294
566
166551
NA;Supply, Installation, Testing & Commissioning of Single face plate and backbox Telephone sockets complete including Backbox cutting, chases, fixing and cable connection entire.
6
502
3017.4
NA;Supply and Fixing of 25mm dia 2.2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. (Excluding TV/TELEPHONE wire)
6100
124
759145
NA;Supply of 300mm dia Light duty exhaust fan with wire guard etc complete
146
1982
289503.4
NA;Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering.
1008
193
194866.56
NA;Supply of 1200 mm (48") sweep ISI mark ceiling Fan as per IS 374- 1979 and operating on 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories. Brown color
458
3756
1720683.1
NA;Supply of 3W LED FOOT LIGHT with input voltage 90 to 300V, Colour temparature 3000k - 6500k, Beam angle 170 - 220 degrees, B22 base..(for new installation)
144
1010
145486.08
NA;Supply of 1 x 12W Mirror light with all standard accessories diffuser.(for new installation)
76
307
23335.04
NA;Supply and transportation of 24W back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 50,000 burning hours with BIS Certification.(for new installation)
12
2119
25430.4
NA;Supply and transportation of 18W edge lit LED slimline panel light Housing made of Pressure die cast aluminium with Powder coated, round / Square with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification.(for new installation)
328
1283
420899.44
NA;Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient
350
3003
1051050
NA;Supply, Transportation and Fixing of 90 W (>=9000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / CROMPTON / BAJAJ / Wipro / HAVELLS LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
20
8324
166490
NA;Supply and transportation of 20W +/- 10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with PC body,wide operating voltage with Single / double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification. (for new installation)
154
737
113596.56
NA;Supply, Transportation and Fixing of 36W (>=3240 Lumens) Edge lit, 2' x2' (600mm x 600mm) slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >90 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% with non integrated driver etc., complete with 2 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
20
3198
63960
NA;Supply, Transportation and Fixing of 22W +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
525
801
420525
NA;Supply and Fixing of 8 Way VTPN DB with IP 43 Protection as per IS:13032 and suitable for accommodating 24 Nos of 6-32A SP MCB's as out goings and 125A 4 Pole MCCB, 25KA as Incommer including internal connection and labour charges for surface / flush mounting etc., complete. Makes : Legrand / Schneider / Siemens / L&T.
6
37730
226380
NA;Supply and transportation of 22W, 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 50,000 burning hours with BIS Certification with BIS Certification.. (for new installation)
740
835
618159
NA;Supply, Wiring with 2 run of 1.5 Sq.mm and 1 run of 1.5 S.q.mm for earthing F.R. P.V.C insulated flexible copper cable in existing PVC Conduit pipe for 6 A modular switch control on a independent sockets from switch boards to independent sockets including all labour charges etc. Complete. Note : 1Meter = 2Runs of 1.5 Sq.mm + 1 Run of 1.5Sq.mm
5800
126
732250
NA;Supply and Laying of 4 runs of 10.0 Sq.mm and 1 run of 2.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
190
591
112291.9
NA;Supply, Wiring with 4 run of 6 Sq.mm and 1 run of 6 S.q.mm for earthing F.R. P.V.C insulated flexible copper cable in existing PVC Conduit pipe for 32A sockets from sub distribution board to switch boards including all labour charges etc. Complete. Note : 1Meter = 4Runs of 6 Sq.mm + 1 Run of 6Sq.mm
600
523
314370
NA;Supply and Laying of 4 runs of 6.0 Sq.mm and 1 run of 2.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
190
382
72665.5
NA;Supply, Wiring with 2 run of 6 Sq.mm and 1 run of 6 S.q.mm for earthing F.R. P.V.C insulated flexible copper cable in existing PVC Conduit pipe for 20A sockets from sub distribution board to switch boards including all labour charges etc. Complete. Note : 1Meter = 2Runs of 6 Sq.mm + 1 Run of 6Sq.mm
600
241
144660
NA;Supply, Wiring with 2 run of 4 Sq.mm and 1 run of 2.5 S.q.mm for earthing F.R. P.V.C insulated flexible copper cable in existing PVC Conduit pipe for 16A sockets & A/C points from sub distribution board to switch boards including all labour charges etc. Complete. Note : 1Meter = 2Runs of 4 Sq.mm + 1 Run of 2.5Sq.mm
6400
213
1368640
NA;Supply and Laying of 2 runs of 4.0 Sq.mm and 1 run of 1.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
1160
158
183384.4
NA;Supply, Wiring with 2 run of 2.5 Sq.mm and 1 run of 1.5 S.q.mm for earthing F.R. P.V.C insulated flexible copper cable in existing PVC Conduit pipe for lighting Circuit wring from sub distribution board to switch boards,5A sockets and Gyser point wring including all labour charges etc. Complete. Note : 1Meter = 2Runs of 2.5 Sq.mm + 1 Run of 1.5Sq.mm
9730
158
1543178
NA;Wiring with 2 runs of 1.5 Sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specification for Copper cable. in existing pipe with Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Makes : Finolex / RR kabel / Havells /Polycab
1500
896
1344255
NA;Supply of 8WAY VTPNDB Protection as per IS:13032 and suitable for accommodating T.P. / S.P. as out goings and 125A / 160A 4 pole MCCB as Incomer etc complete
18
41742
751372.92
NA;Supply and Fixing of 4 Way VTPN DB with IP 43 Protection as per IS:13032 and suitable for accommodating 12 Nos of 6-32A SP MCB's as out goings and 63A 4 Pole MCCB, 16KA as Incommer including internal connection and labour charges for surface / flush mounting etc., complete. Makes : Legrand / Schneider / Siemens / L&T.
2
28149
56298
NA;Supply and fixing of 8 way TPN Distribution board with IP-43 protection (Metal Door) suitable for 1 No. 63A 3 phase FP Isolator as incomer and 24 Nos 6-32 A 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.
20
20198
403962.6
NA;Supply and fixing of 4 way TPN Distribution board with IP-43 protection (Metal Door) suitable for 1 No. 63A 3 phase FP Isolator as incomer and 12 Nos 6-32 A 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.
18
12938
232886.34
NA;Supply and Fixing of 2 Module Modular type Electronic Fan Regulator. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
700
528
369600
NA;Supply and Fixing of 16A / 6A 1 way 2 Module Combi Socket Modular Socket with shutter Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
72
190
13701.6
NA;Supply and Fixing of 16A / 20A 1 Way 1 Module Modular Switch. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
72
116
8395.2
NA;Supply and Fixing of 10A 3/2 Pin 2 Module Modular Socket with shutter Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
216
129
28036.8
NA;Supply and Fixing of 6A / 10A 1 Way Modular Switch Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
1700
86
147730
NA;Supply and fixing of Supply of 32A TP Plug and Socket with SS enclosure with earth continuity including wire leads, earth connections along with all labour charges etc., complete
8
3497
27983.2
NA;Supply and fixing of 20A flush type wall plug socket with shutter and 20A 1 way flulsh type modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete
8
746
5975.2
NA;Supply and fixing of 16 A 3 pin modular wall plug socket with 16 A modular switch control on a independent switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
204
819
167249.4
NA;Supply and fixing of 6A 3/2 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
548
791
433961.2
NA;Wiring with 3 runs of 1.5 Sq.mm Fire Retardant Low Smoke (FRLS) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6 A modular switch, Regulator and Fan Junction box including all labour charges etc., complete for fan point. ( PVC conduit, back box and front plate will paid through other item)
308
2564
789943
NA;Wiring with run of 3 of 1.5 Sq.mm FRLS / HFFR PVC insulated flexible ISI marked copper cable make in existing consealed pipe including supply and fixing of 6 Module Metal Box with cover frame 3 Plate Jumbo Ceiling rose and 10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B.
800
1892
1513720
NA;Supply and fixing of 1 or 2 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
144
155
22334.4
NA;Supply and fixing of 3 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
18
204
3682.8
NA;Supply and fixing of 4 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
16
243
3889.6
NA;Supply and fixing of 6 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
72
332
23918.4
NA;Supply and fixing of 8 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
20
421
8426
NA;Supply and fixing of 12 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
210
511
107415
NA;Supply and Laying of 32mm outer dia PVC pipe medium grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
190
91
17411.6
NA;Supply and Laying of 25mm outer dia PVC pipe medium grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
450
68
30960
NA;Supply and Laying of 32mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
420
93
39194.4
NA;Supply and Laying of 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
850
82
70006
NA;Supply and Fixing of ISI marked 32mm outer dia medium grade FRLS with IS:9537 part 3 regid PVC pipe on concealed /surface of wall / on slaughted channels with supporting anchor rods with MS Junction box normal range big size long neck fixing on chromium plated metallic base saddles including all required materials and labour charges etc.,with redoing wall fine cement plastering etc., complete for run of mains.
5810
139
807880.5
NA;Supply and laying of ISI marked 25mm outer dia medium grade FRLS with IS:9537 part 3 rigid PVC pipe concealed in wall with Metallic junction boxes, PVC Bends accessories including masonary work for light, fan and separate plug point including chisseling brick work, engaging skilled mason for fine wall cement plastering & all labour charges etc., complete.
6450
131
844950
NA;Supply and Laying of ISI marked 25mm outer dia heavy grade FRLS with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes, PVC Bends including binding wire work and rechecking the continuity of pipes during slab laying and also after removing the centrering work including all labour and other incidental charges etc., complete.
13850
124
1723632.5
NA;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes,collors, PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
504
406
204624
NA;Cutting holes in RCC slab floor & repairs Labour charges only, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.
60
125
7500
NA;Cutting holes in Brick masonry & repairs Labour charges only including all incidental,laboour charges, overheads & contractors profit etc. complete for finished item of work.
60
85
5100
NA;Cutting holes in stone masonry & basement and repairs- Labour charges only including overheads & contractors profit etc. complete for finished item of work.
4
125
500
NA;Cutting holes in C.C; basement & repairs- Labour charges only including overheads & contractors profit etc. complete for finished item of work.
4
188
752
NA;Supplying & Fixing white glazed flat back half stall urinals of size 590 x 375 x 390 mm with standard C.P. Spreader fixed with screws complete Indian make 1st quality conforming to IS:2556-1995: fitted with 15 mm brass body CP finish self closing tap push type conforming to IS 1711 and 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects for all floors
66
4766
314556
NA;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 5'-0" Depth
48
15441
741168
NA;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 3'-0" Depth
28
9783
273924
NA;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of work 202.8 mm (8") dia
90
1281
115290
NA;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of workg. 152.4 mm (6") dia
680
1007
684760
NA;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping etc complete for finished item of work 101.4 mm (4") dia
400
910
364000
NA;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.
7200
10
72000
NA;Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 40 mm Nominal Bore
14
4623
64722
NA;Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 40 mm Nominal Bore
18
2626
47268
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
20
3041
60820
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
24
1484
35616
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 20 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
20
1070
21400
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 15 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
24
767
18408
NA;Supply and laying of ASHIRVAD or equivalent CPVC Pipes and Fittings or equalant for Hot & Cold conforming to IS 15778:2007 with malleable specials such as Tees, Elbows, check nuts, unions, bushes, etc, with hot pressed joints with required solution including fixing in walls ceiling floors Include for necessary excavation in all sorts of soils, chasing in the walls etc, refilling consolidation with the excavated earth & Making bores in walls ceiling etc. and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including cost, all taxes and all labour charges for all operations and transportation etc., complete for finished item of work as directed by the Engineer In charge for OD Pipe SDR 11..rate inclusive of CP & OH Premium make CPVC Pipes of 54.00mm OD Pipe-SDR 11
360
674
242640
NA;Supply and laying of ASHIRVAD or equivalent CPVC Pipes and Fittings or equalant for Hot & Cold conforming to IS 15778:2007 with malleable specials such as Tees, Elbows, check nuts, unions, bushes, etc, with hot pressed joints with required solution including fixing in walls ceiling floors Include for necessary excavation in all sorts of soils, chasing in the walls etc, refilling consolidation with the excavated earth & Making bores in walls ceiling etc. and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including cost, all taxes and all labour charges for all operations and transportation etc., complete for finished item of work as directed by the Engineer In charge for OD Pipe SDR 11..rate inclusive of CP & OH Premium make CPVC Pipes of 41.30mm OD Pipe-SDR 11
544
463
251872
NA;Supply and laying of ASHIRVAD or equivalent CPVC Pipes and Fittings or equalant for Hot & Cold conforming to IS 15778:2007 with malleable specials such as Tees, Elbows, check nuts, unions, bushes, etc, with hot pressed joints with required solution including fixing in walls ceiling floors Include for necessary excavation in all sorts of soils, chasing in the walls etc, refilling consolidation with the excavated earth & Making bores in walls ceiling etc. and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including cost, all taxes and all labour charges for all operations and transportation etc., complete for finished item of work as directed by the Engineer In charge for OD Pipe SDR 11..rate inclusive of CP & OH Premium make CPVC Pipes of 34.90mm OD Pipe-SDR 11
792
373
295416
NA;Supply and laying of ASHIRVAD or equivalent CPVC Pipes and Fittings or equalant for Hot & Cold conforming to IS 15778:2007 with malleable specials such as Tees, Elbows, check nuts, unions, bushes, etc, with hot pressed joints with required solution including fixing in walls ceiling floors Include for necessary excavation in all sorts of soils, chasing in the walls etc, refilling consolidation with the excavated earth & Making bores in walls ceiling etc. and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including cost, all taxes and all labour charges for all operations and transportation etc., complete for finished item of work as directed by the Engineer In charge for OD Pipe SDR 11..rate inclusive of CP & OH Premium make CPVC Pipes of 28.60mm OD Pipe-SDR 11
1060
274
290440
NA;Supply and laying of ASHIRVAD or equivalent CPVC Pipes and Fittings or equalant for Hot & Cold conforming to IS 15778:2007 with malleable specials such as Tees, Elbows, check nuts, unions, bushes, etc, with hot pressed joints with required solution including fixing in walls ceiling floors Include for necessary excavation in all sorts of soils, chasing in the walls etc, refilling consolidation with the excavated earth & Making bores in walls ceiling etc. and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including cost, all taxes and all labour charges for all operations and transportation etc., complete for finished item of work as directed by the Engineer In charge for OD Pipe SDR 11..rate inclusive of CP & OH Premium make CPVC Pipes of 22.20mm OD Pipe-SDR 11
228
229
52212
NA;Supply and laying of ASHIRVAD or equivalent CPVC Pipes and Fittings or equalant for Hot & Cold conforming to IS 15778:2007 with malleable specials such as Tees, Elbows, check nuts, unions, bushes, etc, with hot pressed joints with required solution including fixing in walls ceiling floors Include for necessary excavation in all sorts of soils, chasing in the walls etc, refilling consolidation with the excavated earth & Making bores in walls ceiling etc. and making good the chased surface in cement mortar and complete. When making a transition use metal threads fittings, including cost, all taxes and all labour charges for all operations and transportation etc., complete for finished item of work as directed by the Engineer In charge for OD Pipe SDR 11..rate inclusive of CP & OH Premium make CPVC Pipes of 15.90mm OD Pipe-SDR 11
642
189
121338
NA;Supplying, laying and jointing 40mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc excluding GI bends, GI connectors including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge.
120
559
67080
NA;Supplying, laying and jointing 25mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc excluding GI bends, GI connectors including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge.
136
357
48552
NA;Supplying, laying and jointing 15mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc excluding GI bends, GI connectors including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge.
288
244
70272
NA;Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost and conveyance of all materials to site, all operational,incidental , labour charges etc. overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
60
618
37080
NA;Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, etc. complete for finished item of work in all respects.
54
3941
212814
NA;Supply and fixing CP finish brass soap dish of approved make with screws including cost and conveyance of all materials to site, all operational,incidental , labour charges and overhead & contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge.
142
712
101104
NA;Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2- 2004 of white glazed with 'S' trap with CI short Connector & 4" dia CP thimble pipe: 150 mm long, best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996, PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and 15 mm nominal size PVC connection with brass union nut C.P coated all of approved make, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
48
7164
343872
NA;Supply & fixing of PVC low level system with internal components & short bend: 10 liters capacity Dual Flush including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
22
2242
49324
NA;S&F of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931 including cost & conveyance of all materials, all operational, incidental labour charges, overhead & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
8
753
6024
NA;Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges, etc.,. complete as per standard practice for finished item of work.
22
5935
130570
NA;Supplying and fixing of 75mm dia Sinble Socket SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) for 76.2 mm (3") dia pipe
1460
333
486180
NA;Supplying and fixing of 110mm dia Sinble Socket SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) for 101.6 mm (4") dia pipe
1912
409
782008
NA;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
114
934
106476
NA;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded conenction conforming to IS 8931, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
130
311
40430
NA;Supplying & fixing of 3" (75 mm nominal size ) Nahany Trap with Jali - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
150
187
28050
NA;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc. complete for finished item of work. (APSS No 1326)
28
820
22960
NA;Supply & erection of open shelves using cement bonded particle board (Bison Panel) confirming to IS 14276 with 20mm thick board for sides & shelves, 8mm back liner with 15 ?depth, Each shelf height 12? to 15? with all hardware screws & nails
280
2459
688520
NA;Supply and Installation of 12 mm thick Flux standing seam polycarbonate panel system of DPI Daylighting or Equivalent, Supply and installation of translucent roof with DPI flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm min width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility and strength. Panels with all fixing accessories to ensure best performance for wind uplift vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid separately) with 3 numbers of self-drilling screws and trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min 7000N tested as per ISO 6892-1998 and IS 1608-2005 as per design requirement. Panels must satisfy dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min of 500 Hours as per ASTM G 155. Panels shall not have yellowness index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2;2018. Panel shall be with additional end cap/ Aluminium U/F profile/Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the Engineer-in-Charge.
180
3655
657900
NA;Providing Mild Steel, Structural Steel, I.e., MS Plates and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.
3000
161
483000
NA;Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
774
191
147834
NA;Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.
3142
204
640968
NA;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer
12550
264
3313200
NA;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
37688.64
147
5540230.08
NA;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for walls - including cost of access scaffolding for:putty THIRD FLOOR
634.02
535
339200.7
NA;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for walls - including cost of access scaffolding for:putty SECOND FLOOR
4221.04
506
2135846.24
NA;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for walls - including cost of access scaffolding for:putty FIRST FLOOR
4221.04
478
2017657.12
NA;Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for walls - including cost of access scaffolding for:putty GROUND FLOOR
8321.04
449
3736146.96
NA;Supplying and fixing stainless steel hand railing, balustrade etc using 304 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" height from base level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials to site, buffing charges, polishing charges, overheads & contractors profit etc using SS pipes with minimum weight of 4.57kg/Rmt for 50mm dia, 3.61kg/Rmt for 40mm dia and 2.46kg/Rmt for 25mm dia, complete for finished item of work.
3400
788
2679200
NA;Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60mm x 55 mm x 2.40 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 mm x 60 mm x 2.40 mm with reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
92
4880
448960
NA;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
600
7119
4271400
NA;Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge (SS butt hinges and SS screws shall be paid separately)
230
2138
491740
NA;Providing and fixing factory-made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast.
640
777
497280
NA;Providing Mild Steel, Structural Steel, I.e., Angles, Channels, of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.
1700
123
209100
NA;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
18
6200
111600
NA;Supply and fixing of pre-painted steel casement/ openable windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutter with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2x1219.2mm)
60
8744
524640
NA;Supply and fixing Teak Wood framed FLUSH Doors double shutter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm andflush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x12mm dia, 1 No. Aldrops - 300 mm long, 1No latch 200mm long and 2 Nos. handles of 150 mm size & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
603
5316
3205548
NA;Supply and fixing single shutter doors as per drawing with Medium teak wood door frames of size 125x75 mm and flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on the other face (lipping) 30 mm thick conforming to IS:2202 including cost of 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, supplying and fixing Stainless Steel fixtures of 3 Nos Butt hinges (IS 12817) - 125 mm Long, 1 No Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 No. Aldrop (IS:15834) 250 mm long, , 2 Nos. Door handles 100 mm ,1 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters including providing and fixing PVC door cladding 1mm thick duly pasting with sythetic glue or nailed as per the directions of the engineer in charge, including cost of overheads and contractor profit etc., complete for finished item of work as per APSS 1001 and 1002. (0.75X2.15)
30
8557
256710
NA;Supply and fixing Teak Wood framed FLUSH Doors double shutter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1 No Flat Latches: 200 mm long and 1 No. fancy handles of 150 mm size & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
222
6474
1437228
NA;Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated base steel as per IS 513 of ?D? quality, galvanized as per IS 277 and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanized steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer, finish painted with a polyester paint or powder coated with pure polyester powder and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and EPDM gasket, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self-expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges excluding scaffolding complete for finished item of work.
492.94
7509
3701456.42
NA;Providing skirting to internal walls to 12.50 cm height with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand (fine aggreage to be used as (50% sand + 50% manufactured sand)) with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete for finished item of work. (APSS No.701 &707)
40
889
35560
NA;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 600 x 600mm or any other size as specified set over a base coat of CM (1:8), (fine aggreage to be used as (50% sand + 50% manufactured sand)) 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
300
794
238200
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads of 0.3 m height THIRD FLOOR
39.6
7674
303890.4
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads of 0.3 m height SECOND FLOOR
39.6
7498
296920.8
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads of 0.3 m height FIRST FLOOR
139.6
7323
1022290.8
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads of 0.3 m height GROND FLOOR
319
7148
2280212
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers THIRD FLOOR
20.7
5170
107019
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers SECOND FLOOR
20.7
5110
105777
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers FIRST FLOOR
70.7
5050
357035
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers GROND FLOOR
146.85
4990
732781.5
NA;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours including black in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick, (fine aggreage to be used as (50% sand + 50% manufactured sand)) with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work THIRD FLOOR
14.61
6073
88726.53
NA;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours including black in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick, (fine aggreage to be used as (50% sand + 50% manufactured sand)) with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of workSECOND FLOOR
71.89
5928
426149.1
NA;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours including black in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick, (fine aggreage to be used as (50% sand + 50% manufactured sand)) with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work FIRST FLOOR
71.89
5782
415653.53
NA;Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours including black in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick, (fine aggreage to be used as (50% sand + 50% manufactured sand)) with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand, water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707)GROND FLOOR
91.89
5637
517969.84
NA;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) THIRD FLOOR
18.3
5439
99533.7
NA;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) SECOND FLOOR
500
5351
2675500
NA;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) FIRST FLOOR
522
5263
2747286
NA;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) GROND FLOOR
653
5175
3379275
NA;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge SECONF FLOOR
602
1107
666414
NA;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge FIRST FLOOR
928
1096
1017088
NA;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge GROND FLOOR
2471
1084
2678564
NA;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) SECONF FLOOR
150
1011
151650
NA;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) FIRST FLOOR
248
964
239072
NA;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) GROND FLOOR
337
916
308692
NA;Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. SECOND FLOOR
124.18
1336
165903.14
NA;Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. FIRST FLOOR
171.18
1288
220478.55
NA;Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. GROND FLOOR
281
1240
348440
NA;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) SECOND FLOOR
801
1344
1076544
NA;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) FIRST FLOOR
2133
1296
2764368
NA;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) GROND FLOOR
5574
1248
6956352
NA;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). THIRD FLOOR
6448
678
4371744
NA;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). SECOND FLOOR
140
635
88900
NA;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). FIRST FLOOR
140
592
82880
NA;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). GROND FLOOR
602
549
330498
NA;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) THIRD FLOOR
315
681
214515
NA;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) SECOND FLOOR
2677.5
626
1676115
NA;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) FIRST FLOOR
4775.5
572
2731586
NA;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) GROND FLOOR
9800.5
517
5066858.5
NA;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) THIRD FLOOR (INTERNAL & EXTERNAL)
1534.02
644
987908.88
NA;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) SECOND FLOOR (INTERNAL & EXTERNAL)
6090.04
595
3623573.8
NA;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) FIRST FLOOR (INTERNAL & EXTERNAL)
12148
545
6620660
NA;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) GROND FLOOR (INTERNAL & EXTERNAL)
16421
496
8144816
NA;Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) SECOND FLOOR
219.74
1048
230287.52
NA;Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) FIRST FLOOR
343.74
961
330334.14
NA;Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) GROND FLOOR
525.74
875
460022.5
NA;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, (with 50% river sand & 50% manufactured sand). bricks, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504).THIRD FLOOR
97.24
9614
934865.36
NA;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, (with 50% river sand & 50% manufactured sand). bricks, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). SECOND FLOOR
657.64
9062
5959533.68
NA;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, (with 50% river sand & 50% manufactured sand). bricks, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). FIRST FLOOR
1182.64
8511
10065449.04
NA;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, (with 50% river sand & 50% manufactured sand). bricks, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). GROND FLOOR
1555.14
7960
12378914.4
NA;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) THIRD FLOOR
12.91
91469
1180864.79
NA;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) SECOND FLOOR
79.62
89976
7163889.12
NA;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) FIRST FLOOR
150.62
88483
13327309.46
NA;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) GROND FLOOR
333.96
86990
29051180.4
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / Sunshadefor:-Sun Shade-Slab thk 62.50 THIRD FLOOR
40
1164
46560
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / Sunshadefor:-Sun Shade-Slab thk 62.50 SECOND FLOOR
200
1124
224800
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / Sunshadefor:-Sun Shade-Slab thk 62.50 FIRST FLOOR
233
1083
252339
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / Sunshadefor:-Sun Shade-Slab thk 62.50 GROND FLOOR
367
1042
382414
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - F F-200 mm thick 3.66M Height
71
1786
126806
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - G F-200 mm thick 3.66M Height
153
1750
267750
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - G F-150 mm thick 6.00M Height
2800
1900
5320000
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - F F-125 mm thick 4.27M Height
1398
1479
2067642
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - G F-125 mm thick 4.27M Height
2112
1438
3037056
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - T F-125 mm thick 3.66M Height
400
1435
574000
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - S F-125 mm thick 3.66M Height
1765
1399
2469235
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - F F-125 mm thick 3.66M Height
1765
1364
2407460
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - G F-125 mm thick 3.66M Height
1765
1328
2343920
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - GROUND FLOOR 6.00M Height
140
15026
2103640
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - GROUND FLOOR 4.27M Height
273
12129
3311217
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - THIRD FLOOR 3.66M Height
40
12101
484040
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - SECOND FLOOR 3.66M Height
156.57
11789
1845803.73
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - FIRST FLOOR 3.66M Height
156.57
11476
1796797.32
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - GROUND FLOOR 3.66M Height
156.57
11164
1747947.48
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS - THIRD FLOOR
3
13074
39222
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS - SECOND FLOOR
16.3
12808
208770.4
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS - FIRST FLOOR
22.3
12543
279708.9
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS - GROUND FLOOR
42.3
12278
519359.4
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS - Ground Floor 6.00M Height
304
15080
4584320
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS - Ground Floor 4.27 M Height
105
12991
1364055
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS - Third Floor 3.66 M Height
15.96
13412
214055.52
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS -Second Floor 3.66 M Height
117.94
13039
1537819.66
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS -First Floor 3.66 M Height
117.94
12667
1493945.98
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS - Ground Floor 3.66 M Height
147.94
12294
1818774.36
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS SECOND FLOOR
4
8091
32364
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS FIRST FLOOR
4
7987
31948
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS GROUND FLOOR
14
7883
110362
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for PLINTH BEAMS
361
10756
3882916
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for PEDESTALS .
63
8545
538335
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Footings
1969
7883
15521627
NA;Pre construction anti termite treatment Chemical: Imidacloprid 30.5sc Bayer company brand name: premise. 1st stage sparying in the pits : In the bottom level up to 3 feet. 2nd stage: Before laying the Raft / Floor PCC Treating the top surface of the consolidated earth within the plinth walls by making channels all wall adjacent ares poring chemical emulsion @7.5 lts per sqm and digging holes in the top surface of Filled Soil/Sand area at the distance of 300mm ie 1feet and depth 300mm ie 1feet if site is consolidated other wise in case of soling depth may be 100 mm to 150mm only after that filling @5lts chemical emulsion per sqm 3rd stage : Around the building outside area ie periphery at the distance of 300mm by making channels Pouring chemical emulsion @ 7.5lts per sqm. Ratio 2.1 ML chemical per 1 lts of water ie 10.5 ML in 5 ltrs water ie 1LTR chemical in 475 ltrs water.
4530
134
607020
NA;Filling with carted gravel in trenches,sides of foundations and basement in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water, gravel to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310) Mechanical
3411
405
1381455
NA;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310) Mechanical
7495
209
1566455
NA;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:3:6) NOMINAL MIX
1160
5729
6645640
NA;Plain Cement Concrete corresponding to M-20 grade as per IS 456 nominal mix using 20mm size graded aggregate machine crushed hard granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing etc., complete for finished item of work, for:-Machine Mix-PCC : M-20 NOMINAL MIX. FOR BED OF SUMP AND SEPTIC TANK.
36
5708
205488
NA;Raised Pointing to RR/ CRS Masonry in CM (1:3) (with 50% river sand & 50% manufactured sand) including cost and conveyance of all materials in site, curing, labour charges etc, overheads & contractors profit, complete for finished item of work.
578
111
64158
NA;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (with 50% river sand & 50% manufactured sand), water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
555
4446
2467530
NA;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
248
4575
1134600
NA;Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)
187
3547
663289
NA;Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308) Mechanical means
3514
161
565754
NA;Drilling of 18mm dia holes in hard granite or sheet rock, cleaning the holes manually, supplying & fixing of 25mm dia bars in rock and in concrete fixed in drilled hole with two parts system of epoxy bonding adhesive conforming to ASTM-C881 at 0.60 Kgs per RM including cost and conveyance of epoxy and all materials to site and labour complete as per approved drawing/ as per site conditions excluding cost of reinforcement and its fabrication as directed by the Engineer-in-Charge including cost of and overheads & contractors profit etc., complete for fnished item of work
307
1025
314675
NA;Earth work excavation for SUMPS, TANKS & Open excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth
1338
87
116406
NA;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means-Up to 3M depth
9803
151
1480253
NA;Conducting soil tests for determining Safe Bearing Capacity (SBC) for BUILDING foundations duly excavating trial pits of size not less than 1.2 x 1.2 x 1.5 M and collecting the Un-disturbed soil samples (UDS) as per the standard code of practice and getting the soils tested in a reputed soil laboratory such as 'Industrial Consultancy Services' of Andhra University or 'Industrial Consultancy services' of JNT University, Vizianagaram and furnish the report to the N.A.C. authorities for ensuring the design bearing pressure at site with that of the actual bearing pressure including making the excavated pit good by refilling to its original state and all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, collecting undisturbed soil sample, sending it to the soil laboratory, furnishing the SBC report etc. complete for finished item of work as per IS: 6403-1981
5
6784
33920
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements