Jawaharlal Nehru Technological University Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 11,800
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
393003Bid Award Id
ViewTender No
JNTUH/ED/CEW/4431/2022-23, Dated 16-02-2023Tender Authority
Jawaharlal Nehru Technological University ViewPurchaser Address
-Website
http://https://jntuh.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
NA;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
2
16670
33340
NA;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
6
5836
35016
NA;Supply and Fixing of 9" (225mm) Light duty exhaust fan with metal blades etc complete Makes : Crompton / Havells Ventilair-DB / Orient hill air.
18
1596
28729.8
NA;Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering.
350
193
67662
NA;Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient
350
3003
1051050
NA;Supply, Transportation and Fixing of 90 W (>=9000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / CROMPTON / BAJAJ / Wipro / HAVELLS LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
10
8324
83245
NA;Supply, Transportation and Fixing of 36W (>=3240 Lumens) Edge lit, 2' x2' (600mm x 600mm) slim panel LED luminaire Square Housing Made of Aluminum alloy with corrosion resistant powder coat, with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >90 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% with non integrated driver etc., complete with 2 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
10
3198
31980
NA;Supply, Transportation and Fixing of 22W +/ 10% , >/ 2300 lumens, 1200mm length LED light housing made with alluminium anodised body, wide operating voltage with PF=0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI=80 etc., complete with 5 years warranty with BIS Certification with BIS Certification. LUMINAIRE MAKE: Phillips / OSRAM / GE Venture / Wipro / Crompton / Bajaj / Havells LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
525
801
420525
NA;Supply and Fixing of 8 Way VTPN DB with IP 43 Protection as per IS:13032 and suitable for accommodating 24 Nos of 6-32A SP MCB's as out goings and 125A 4 Pole MCCB, 25KA as Incommer including internal connection and labour charges for surface / flush mounting etc., complete. Makes : Legrand / Schneider / Siemens / L&T.
6
37730
226380
NA;Supply and Fixing of 4 Way VTPN DB with IP 43 Protection as per IS:13032 and suitable for accommodating 12 Nos of 6-32A SP MCB's as out goings and 63A 4 Pole MCCB, 16KA as Incommer including internal connection and labour charges for surface / flush mounting etc., complete. Makes : Legrand / Schneider / Siemens / L&T.
1
28149
28149
NA;Supply and Fixing of 2 Module Modular type Electronic Fan Regulator. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
350
528
184800
NA;Supply and Fixing of 16A / 6A 1 way 2 Module Combi Socket Modular Socket with shutter Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
36
190
6850.8
NA;Supply and Fixing of 16A / 20A 1 Way 1 Module Modular Switch. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
36
116
4197.6
NA;Supply and Fixing of 10A 3/2 Pin 2 Module Modular Socket with shutter Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
108
129
14018.4
NA;Supply and Fixing of 6A / 10A 1 Way Modular Switch Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio.
850
86
73865
NA;Supply and Laying of 4 runs of 10.0 Sq.mm and 1 run of 2.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
95
591
56145.95
NA;Supply and Laying of 4 runs of 6.0 Sq.mm and 1 run of 2.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
95
382
36332.75
NA;Supply and Laying of 2 runs of 4.0 Sq.mm and 1 run of 1.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
580
158
91692.2
NA;Supply and Laying of 2 runs of 2.5 Sq.mm and 1 run of 1.5 Sqmm FRLSH P.V.C. insulated 1100V grade as per IS:694/1990, IS 17048 specification for copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes : Finolex / RR kabel / Havells / Polycab
865
111
96426.74
NA;Wiring with 2 runs of 1.5 Sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specification for Copper cable. in existing pipe with Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings. Makes : Finolex / RR kabel / Havells /Polycab
750
896
672125
NA;Supply and fixing of 1 or 2 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
72
155
11167.2
NA;Supply and fixing of 3 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
9
204
1841.4
NA;Supply and fixing of 4 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
8
243
1944.8
NA;Supply and fixing of 6 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
36
332
11959.2
NA;Supply and fixing of 8 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
10
421
4213
NA;Supply and fixing of 12 modular hot dip galvanized metal box with modular cover frame including all labour charges etc complete. Makes : Legrand Myrius / Anchor Roma viola / Havells Fabio
105
511
53707.5
NA;Supply and Laying of 32mm outer dia PVC pipe medium grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
190
91
17411.6
NA;Supply and Laying of 25mm outer dia PVC pipe medium grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
450
68
30960
NA;Supply and Laying of 32mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
420
93
39194.4
NA;Supply and Laying of 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi
850
82
70006
NA;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes,collors, PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
20
406
8120
NA;Cutting holes in RCC slab floor & repairs Labour charges only, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.
4
125
500
NA;Cutting holes in Brick masonry & repairs Labour charges only including all incidental,laboour charges, overheads & contractors profit etc. complete for finished item of work.
4
85
340
NA;Cutting holes in stone masonry & basement and repairs- Labour charges only including overheads & contractors profit etc. complete for finished item of work.
4
125
500
NA;Cutting holes in C.C; basement & repairs- Labour charges only including overheads & contractors profit etc. complete for finished item of work.
4
188
752
NA;Supplying & Fixing white glazed flat back half stall urinals of size 590 x 375 x 390 mm with standard C.P. Spreader fixed with screws complete Indian make 1st quality conforming to IS:2556-1995: fitted with 15 mm brass body CP finish self closing tap push type conforming to IS 1711 and 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects for all floors
12
4766
57192
NA;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 5'-0" Depth
4
15441
61764
NA;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 3'-0" Depth
4
9783
39132
NA;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4 mm (3'0") depth and refilling watering and tamping, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work 152.4 mm (6") dia
240
910
218400
NA;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.
2000
10
20000
NA;Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 40 mm Nominal Bore
2
2626
5252
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
2
3041
6082
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
2
1484
2968
NA;S&F Bronze Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type - 15 mm NB Size of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
2
767
1534
NA;Supplying, laying and jointing 40mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc excluding GI bends, GI connectors including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge.
120
559
67080
NA;Supplying, laying and jointing 25mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc excluding GI bends, GI connectors including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge.
136
357
48552
NA;Supplying, laying and jointing 15mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete, with necessary excavation in all types of soils (except rock requiring blasting) refilling and making good the walls and floors to the original surface, fixing M.S. clamps and T.W. block on walls wherever required, Brick support pillars on terraces etc excluding GI bends, GI connectors including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work as directed by Engineer-in-charge.
288
244
70272
NA;Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost and conveyance of all materials to site, all operational,incidental , labour charges etc. overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
8
618
4944
NA;Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/ Nice/ Esso or equivalent, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded onforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials, etc. complete for finished item of work in all respects.
8
3941
31528
NA;Supply and fixing CP finish brass soap dish of approved make with screws including cost and conveyance of all materials to site, all operational,incidental , labour charges and overhead & contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge.
20
712
14240
NA;Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2- 2004 of white glazed with 'S' trap with CI short Connector & 4" dia CP thimble pipe: 150 mm long, best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996, PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and 15 mm nominal size PVC connection with brass union nut C.P coated all of approved make, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
8
7164
57312
NA;S&F of 15 mm brass body CP finish pillar tap of not less than 300 grams weight screw type (full turn) conforming to IS 8931 including cost & conveyance of all materials, all operational, incidental labour charges, overhead & contractor's profit etc., complete for finished item of work as directed by Engineer-in-charge.
8
753
6024
NA;Supply & fixing of PVC low level system with internal components & short bend: 10 liters capacity Dual Flush including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
4
2242
8968
NA;Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials and labour charges, etc.,. complete as per standard practice for finished item of work.
4
5935
23740
NA;Supplying and fixing of 75mm dia Sinble Socket SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) for 76.2 mm (3") dia pipe
52
333
17316
NA;Supplying and fixing of 110mm dia Sinble Socket SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) for 101.6 mm (4") dia pipe
200
409
81800
NA;S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
4
934
3736
NA;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded conenction conforming to IS 8931, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
12
311
3732
NA;Supplying & fixing of 3" (75 mm nominal size ) Nahany Trap with Jali - UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads & contractors profit etc. complete for finished item of work.
20
187
3740
NA;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc. complete for finished item of work. (APSS No 1326)
4
820
3280
NA;Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
67
191
12797
NA;Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.
985
116
115146.5
NA;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
4623
147
679581
NA;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats + 1 coat primer
3474
264
917136
NA;Providing Mild Steel, Structural Steel, I.e., Angles, Channels, MS Plates and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.
1700
123
209100
NA;Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Fixed louvers 2'-0 x 2'-0 (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm and (ii) Ventilators: Fixed louvers 4'-0 x 2'-0 (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm and (iii) Ventilators: Fixed louvers 4'-0 x 3'-0 (1219.2 x 914.4 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
12
6200
74400
NA;Supply and fixing of pre-painted steel casement/ openable windows base steel as per IS 513 of - 0.58 mm thick 'D quality, galvanized as per IS 277, finish painted with a polyester paint, section for outer frame of 46 x 52 mm section for shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading 18 x 25 mm panelled with 5 mm thick plain float glass fitted with EPDM gaskets, handle made of high grade aluminium powder coated frames fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars @ 150 mm pitch for Windows: Double shutter with mullion section for sizes 3'-0 x 4'-0 (914.4mm x 1219.2 mm) and 4'-0 x 4 '-0 (1219.2x1219.2mm)
60
8744
524640
NA;Supply and fixing single shutter doors as per drawing with Medium teak wood door frames of size 125x75 mm and flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on the other face (lipping) 30 mm thick conforming to IS:2202 including cost of 6 Nos MS-Z Hold fasts-300 mm long of 40x40x5mm ISA, supplying and fixing Stainless Steel fixtures of 3 Nos Butt hinges (IS 12817) - 125 mm Long, 1 No Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 No. Aldrop (IS:15834) 250 mm long, , 2 Nos. Door handles 100 mm ,1 Nos.Rubber/ Nylon door stop bushes including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for making the frame and fixing the frame in position, fixing the shutter to the frame, fixing fixtures to the shutters including providing and fixing PVC door cladding 1mm thick duly pasting with sythetic glue or nailed as per the directions of the engineer in charge, including cost of overheads and contractor profit etc., complete for finished item of work as per APSS 1001 and 1002. (0.75X2.15)
20
8557
171140
NA;Supply and fixing Teak Wood framed FLUSH Doors double shutter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm andflush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x12mm dia, 1 No. Aldrops - 300 mm long, 1No latch 200mm long and 2 Nos. handles of 150 mm size & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (1.06x2.15)
10
6474
64740
NA;Supply and fixing Teak Wood framed FLUSH Doors double shutter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Aluminium fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x10mm dia, 1 No. Aldrops - 300 mm long, 1 No Flat Latches: 200 mm long and 1 No. fancy handles of 150 mm size & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no.of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (2.00x2.40)
57
5316
303012
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges cost of base coat and overheads & contractors profit, complete for finished item of work for treads of 0.3 m height GROND FLOOR
100
7151
715100
NA;Providing 16 to 18mm thick high polished granite stone slabs of premium colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers GROND FLOOR
50
4993
249650
NA;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of premium colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) GROND FLOOR
22
5179
113938
NA;Dadooing to walls with digital / polished glazed full body porcelain highlighter wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge GROND FLOOR
326
1086
354036
NA;Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) GROND FLOOR
98
918
89964
NA;Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. GROND FLOOR
47
1243
58421
NA;Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) GROND FLOOR
1613
1250
2016250
NA;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). GROND FLOOR
154
553
85162
NA;Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) GROND FLOOR
2365
519
1227435
NA;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) FIRST FLOOR
1616
548
885568
NA;Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) GROND FLOOR
5005
498
2492490
NA;Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509) GROND FLOOR
124
891
110484
NA;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, (with 50% river sand & 50% manufactured sand). bricks, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). FIRST FLOOR
58
8668
502744
NA;Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, (with 50% river sand & 50% manufactured sand). bricks, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, cost of overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 & 504). GROND FLOOR
504
8117
4090968
NA;Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. including overheads and contractor's profit complete for finished item of work.
499
923
460577
NA;Providing Mild Steel, Structural Steel, I.e., MS Plates and I sections of different sizes, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.
8400
161
1352400
NA;Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like TATA,SAIL,VSP, Jindal as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) GROND FLOOR
71
86990
6176290
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Chajja / Sunshadefor:-Sun Shade-Slab thk 62.50 GROND FLOOR
33
1050
34650
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - G F-200 mm thick 3.66M Height
71
1774
125954
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for SLAB - G F-125 mm thick 4.27M Height
1408
1454
2047232
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for BEAMS - GROUND FLOOR 4.27M Height
118
12257
1446326
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for LINTELS - GROUND FLOOR
6
12683
76098
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS - Ground Floor 4.27 M Height
70
13396
937720
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity , concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for COLUMNS - Ground Floor 3.66 M Height
24
12700
304800
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for STEPS GROUND FLOOR
4
8090
32360
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for PLINTH BEAMS
52
10963
570076
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for PEDESTALS .
42
8753
367626
NA;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of 20 cum per hour capacity ,Transit mixer 4cum capacity, concrete Pump and using 20mm size graded machine crushed hard trap metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc etc., to site and excluding Seigniorage charges but including sales & other taxes on all materials, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, transportation, laying concrete using concrete pump , curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING , and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work. for Footings
310
8090
2507900
NA;Filling with carted gravel in trenches,sides of foundations and basement in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water, gravel to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310) Mechanical
605
448
271040
NA;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310) Mechanical
1099
150
164850
NA;Plain Cement Concrete corresponding to M-20 grade as per IS 456 nominal mix using 20mm size graded aggregate machine crushed hard granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying concrete, curing etc., complete for finished item of work, for:-Machine Mix-PCC : M-20 NOMINAL MIX. FOR BED OF SUMP AND SEPTIC TANK.
33
5706
188298
NA;Raised Pointing to RR/ CRS Masonry in CM (1:3) (with 50% river sand & 50% manufactured sand) including cost and conveyance of all materials in site, curing, labour charges etc, overheads & contractors profit, complete for finished item of work.
572
112
64064
NA;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (with 50% river sand & 50% manufactured sand), water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
520
4379
2277080
NA;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
232
4555
1056760
NA;Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308)
18
3547
63846
NA;Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges as per SS 20 B(APSS 308) Mechanical means
70
161
11270
NA;Drilling of 18mm dia holes in hard granite or sheet rock, cleaning the holes manually, supplying & fixing of 25mm dia bars in rock and in concrete fixed in drilled hole with two parts system of epoxy bonding adhesive conforming to ASTM-C881 at 0.60 Kgs per RM including cost and conveyance of epoxy and all materials to site and labour complete as per approved drawing/ as per site conditions excluding cost of reinforcement and its fabrication as directed by the Engineer-in-Charge including cost of and overheads & contractors profit etc., complete for fnished item of work
18
1025
18450
NA;Earth work excavation for SUMPS, TANKS & Open excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20B (ApSS 308) in Ordinary Soil-Mechanial Means-Upto 3M depth
88
87
7656
NA;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means-Up to 3M depth
1820
151
274820
NA;Conducting soil tests for determining Safe Bearing Capacity (SBC) for BUILDING foundations duly excavating trial pits of size not less than 1.2 x 1.2 x 1.5 M and collecting the Un-disturbed soil samples (UDS) as per the standard code of practice and getting the soils tested in a reputed soil laboratory such as 'Industrial Consultancy Services' of Andhra University or 'Industrial Consultancy services' of JNT University, Vizianagaram and furnish the report to the N.A.C. authorities for ensuring the design bearing pressure at site with that of the actual bearing pressure including making the excavated pit good by refilling to its original state and all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, collecting undisturbed soil sample, sending it to the soil laboratory, furnishing the SBC report etc. complete for finished item of work as per IS: 6403-1981
1
6784
6784
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements