Jawaharlal Nehru Technological University Tender

na;Wall table module working benches(1500x2100 mm) under bench modules will be made of 1mm thick pre coated galvanized iron sheet (Tata/ESSAR-GI sheet) and structure made up of 40x40 mm square tube l;egs are covered with PVC covers completely finished with epoxy powder coating. This modules will be provided drawer and bottom cupboard lockable doors aesthetic powder coated handles, hinges/channel/locks etc. (Hetich/EBCO/Godrej/ any approved brand). The under bench modules will be arranged as per the diagram and base of the panel will provided with skirting panel along with table top granite slab fine quality polished black color 18 mm thick granite with polished edges

na;Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for Internal walls - acrylic emulsion paint

na;Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., to site, but excluding seigniorage charges on all materials etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) FF

na;Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like (Cement, Screened Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50), water, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., to site, but excluding seigniorage charges on all materials etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) GF

na;Providing and fixing of 75mm thick SOLID WALL PANEL Sandwich panels made of light Weight FRACC two 5 mm thick non-asbestos fibre reinforced cement sheets (conforming to IS:14862:2000) either side of the lightweight concrete core composed of Portland cement inders with tongue and groove arrangement. bottom of the panel shall be fixed to the floor channel made up of 1 mm thick GI 0channels of size 28x77x31 mm fixed to the existing floor with 6x60mm nylon self expansion screws at 600 mm C/C and top of the panel fixed with ceiling channel made out of 0.80 mm thick GI Channel of size 31x77x31 mm duly fixed to the existing ceiling with 6x60mm nylon self expansion screws at 600 mm C/C. All the tongue and groove joints of the panels have to be properly cleaned and both the panels have to be fixed by applying the mixture of fly ash and sodium silicate in between and Everest jointing compound all the exposed joints. The rate includes cost of 75mm SOLID WALL PANEL panels, G.l. Floor and ceiling channel. The panels can be flushed by using paper tape and Everest jointing compound all complete.