Irrigation And CAD Department Tender

Kotha Cheruvu Kambhojipet;Fabrication, supply, erection, testing and commissioning of Sluice Shutters consisting of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sil beam, slide tracks, seal seats, Guide plates etc. with all accessories including cost of all materials,etc. complete as per specifications and approved drawings and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Providing, fabricating and placing in position reinforcement steel for RCC,below 36 dia rods overlaps and wastages wherever required, tying with 1.25 mm diameter soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lifts Overlaps and wastage as per NHAI-data Lap jointing considered for bars upto 36 mm diameter and or as directed by the Engineer-in-Charge, Complying with all standard specifications and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Laying and jointing 600 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ),labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto50 m and all lifts.(Cement content: 24.8 kg / joint, FA : 0.025cum/joint, Hemp Yarn : 0.22kg/joint) and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Manufacture, Supply and Delivery of 600 mm dia NP-2 class R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) Excluding transportation & taxes.

Kotha Cheruvu Kambhojipet;Laying and jointing 300 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2proportion by volume including cost of all materials ( excluding pipes and collars ), machinery,labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 9.9 kg / joint, FA : 0.01cum/joint, Hemp Yarn : 0.091kg/joint) and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Manufacture, Supply and Delivery of 300 mm dia NP-2 class R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) Excluding transportation & taxes.

Kotha Cheruvu Kambhojipet;Providing and laying insitu M- 20 ( 28 days cube compressive strength not less than 20 N / sqmm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for wearing coat including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position in alternate panels, levelling, compacting, finishing, curing, packing joints with asphalt mortar etc., complete with initial lead upto 50 m and all lifts. (Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) If water is to be brought from other place add only lead charges @ 500 ltr / cum. to the data(Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, gradedaggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 280 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Providing and laying insitu vibrated M-10 (28 days cube compressive strength not less than 10 N / sq mm) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 220 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Providing casing embankment using semi-pervious soil available from excavation in layers of 25 to 30 cm before compaction including cost of all materials, machinery, labour, all other operations such as re-excavation, sorting out, transportation, spreading in layers of specified thickness, breaking clods, sectioning,watering, compacting to specified density control of not less than 90 percent using 2 Tonne Roller as stipulated etc.,complete with initial lead upto 1 km and all lifts. (For Maintenance Works) and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Excavation in all kinds of soil including boulders upto 0.30 m dia for field channels,of embankment for field channels etc., including dressing of bed and sides to required profile,cost of all materials, machinery, labour, placing the excavated stuff for formation of serviceroad / embankment as directed etc., complete with lead upto 10 m and lift upto 3 m and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.Depth upto 3 m and or as directed by the Engineer-in-Charge, Complying with all standard specifications

Kotha Cheruvu Kambhojipet;Benching old embankment slopes 0.45 x 0.45 M and or as directed by the Engineer-in-Charge, Complying with all standard specifications