Irrigation And CAD Department Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
₹ 19,26,490Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Kanchanapally-bakkathai Kunta Lis On Amrslbc Hlc Of Nalgonda (m) Of Nalgonda District And Narsinghbatla-domalapally Lis
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
570682Tender No
11SE/2024-25, dt.18.01.2025Tender Authority
Irrigation And CAD Department ViewPurchaser Address
-Website
http://https://irrigation.telangana.gov.in/icad/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
LIS;Supplying of T&P for Miscellaneous items Such as cooling water system MS Pipes @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
540
540
... More
LIS;Supplying of Spares for Miscellaneous items Such as cooling water system MS Pipes @10% on equipment cost and as directed by the Engineer-In - Charge.
1
5400
5400
... More
LIS;Supplying of Miscellaneous items Such as cooling water system MS Pipes for all 415V Pumps complete as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
54000
54000
... More
LIS;Erection, Testing and Commissioning of 415V Capacitor Banks as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
10000
10000
... More
LIS;Supplying of T&P for 415VCapacitor Banks @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
1000
1000
... More
LIS;Supplying of Spares for 415 V Capacitor Banks @10% on equipment cost and as directed by the Engineer-In - Charge.
1
10000
10000
... More
LIS;Design and supplying of 415V Capacitor Banks as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
100000
100000
... More
LIS;Erection, Testing and Commissioning of Fire Protection System as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
1000
1000
... More
LIS;Supplying of T&P for Fire Protection System @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
100
100
... More
LIS;Supplying of Spares for Fire Protection System @10% on equipment cost and as directed by the Engineer-In - Charge.
1
1000
1000
... More
LIS;Design and supplying of Fire Protection System as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
10000
10000
... More
LIS;Erection, Testing and Commissioning of Power House Earthing materials as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Supplying of T&P for earthing materials @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Supplying of Spares for earthing materials @10% on equipment cost and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Design and supplying of Power House Earthing materials as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
50000
50000
... More
LIS;Erection, Testing and Commissioning of Lighting along with necessary auaxilaries for complete pumphouse which includes control room, pump floor, Auxilary bay , maintenance bay complete as per design @10% on equipment cost and as directed by the Engineer-In - Charge.
1
1000
1000
... More
LIS;Supplying of T&P for Lighting @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
100
100
... More
LIS;Supplying of Spares for Lighting @10% on equipment cost and as directed by the Engineer-In - Charge.
1
1000
1000
... More
LIS;Design and Supplying of Lighting along with necessary auxilaries for complete pumphouse which includes control room, pump floor, Auxilary bay , maintenance bay complete as per design and as directed by the Engineer-In - Charge.
1
10000
10000
... More
LIS;Erection, Testing and Commissioning of 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. suitable for pumps with all accessories etc complete as per approved Drawings and Specification @ 10% on equipment cost and as directed by the Engineer-in-charge
1
25000
25000
... More
LIS;Supplying of T&P for 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. @ 1% on equipment cost and as directed by the Engineer-in-charge
1
2500
2500
... More
LIS;Supplying of Spares for 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. @10% on equipment cost and as directed by the Engineer-in-charge
1
25000
25000
... More
LIS;Design,Supply of 200 AH, 110 V D.C Batteries with Battery Charger suitable for pumps with all accessories etc complete as per approved Drawings and Specification and as directed by the Engineer-in-charge
1
250000
250000
... More
LIS;Erection, Testing and Commissioning of station auxiliary board (415 V) as per approved designs and specifications @ 10% on equipment cost and as directed by Engineer-in- Charge
1
500000
500000
... More
LIS;Supplying of T&P for station auxiliary board (415 V) @ 1% on equipment cost and as directed by Engineer-in- Charge
1
50000
50000
... More
LIS;Supplying of Spares for station auxiliary board (415 V) @10% on equipment cost and as directed by Engineer-in- Charge
1
500000
500000
... More
LIS;Design and Supply of Station Auxillary Board (415V)as per approved designs and specifications complete and as directed by Engineer-in- Charge with i) 1000A ACBs incoming feeders from 650 KVA transformer- 2 Nos ii) 600A ACBs outcoming feeder -4 Nos iii) 250A ACBs outcoming feeders - 3 Nos (2 for motors and one spare) iv) 150A ACBs outcoming feeders - 3 Nos (2 for motors and one spare) v) 63A ACBs outcoming feeders - 4 Nos vi) 32A ACBs outcoming feeders - 4 Nos
1
5000000
5000000
... More
LIS;Insurance @ 1% on total cost of all equipment (on unitized items) and as directed by Engineer-in- Charge
1
117000
117000
... More
LIS;Freight charges @ 1% on total cost of all Equipment (on unitized items) and as directed by Engineer-in- Charge
1
117000
117000
... More
LIS;Erection, Testing and Commissioning of Miscellaneous items Such as cooling water system MS Pipes for Pumps complete as per approved designs and drawings, specifications @ 10% on equipment cost and as directed by Engineer-in- Charge
1
10400
10400
... More
LIS;Supplying of T&P for Miscellaneous items Such as cooling water system MS Pipes for pumps @ 1% on equipment cost and as directed by Engineer-in- Charge
1
1040
1040
... More
LIS;Supplying of Spares for Miscellaneous(Unforeseen) items Such as cooling water system for Pumps complete @10% on equipment cost and as directed by Engineer-in- Charge
1
10400
10400
... More
LIS;Supplying of Miscellaneous (Unforeseen) items Such as cooling water system for Pumps complete @ 1% on total equipment cost as per approved designs and drawings and as directed by Engineer-in- Charge
1
104000
104000
... More
LIS;Erection, Testing and Commissioning of Control Cables including cable trays, laying of cables etc as per approved design and technical specifications and @ 02% on equipment cost and as directed by Engineer-in- Charge
1
20000
20000
... More
LIS;Supplying of T&P for Control Cables including cable trays, laying of cables @ 1% on equipment cost and as directed by Engineer-in- Charge
1
2000
2000
... More
LIS;Supplying of Spares for Control Cables including cable trays, laying of cables @10% on equipment cost and as directed by Engineer-in- Charge
1
20000
20000
... More
LIS;Design, Supply of Control Cables including cable trays, laying of cables etc as per approved design and Technical Specifications and as directed by Engineer-in- Charge
1
200000
200000
... More
LIS;Erection, Testing and Commissioning of L.T. 415V Power Cables as per approved design and Technical Specifications etc., @ 10% on equipment cost and as directed by Engineer-in- Charge
1
100000
100000
... More
LIS;Supplying of T&P for L.T. 415V Power Cables @ 1% on equipment cost and as directed by Engineer-in- Charge
1
10000
10000
... More
LIS;Supplying of Spares for L.T. 415V Power Cables @10% on equipment costand as directed by Engineer-in- Charge
1
100000
100000
... More
LIS;Design, Supply of L.T. 415V Power Cables as per approved design and technical specifications and as directed by Engineer-in- Charge
1
1000000
1000000
... More
LIS;Erection Testing and commissioning of star delta starter panel with all connections etc., as per specifications furnished in the tender schedule approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
2
25000
50000
... More
LIS;Supplying of T&P for star delta starter panel suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
2
2500
5000
... More
LIS;Supplying of Spares for star delta starter panel suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
2
25000
50000
... More
LIS;Design and Supply of new star delta starter panel suitable for Submersible Motor pump Set with all connections etc., as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
250000
500000
... More
LIS;Erection, Testing and Commissioning of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves as per approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
4
6800
27200
... More
LIS;Supplying of T&P for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
4
680
2720
... More
LIS;Supplying of Spares for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
4
6800
27200
... More
LIS;Design, Supply of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves of 300mm for discharge of 0.23 cumecs for each pump dia as SSR 2024-25 suitable for Submersible Motor pump Set as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
4
68000
272000
... More
LIS;Erection, Testing and Commissioning of Submersible Motor pump Set with 0.23 cumecs discharge and 100 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification @10% on quipment cost and as directed by Engineer-in-charge
2
225000
450000
... More
LIS;Supplying T&P suitable for Submersible Motor pump & Induction Motor @ 1% on equipment cost and as directed by Engineer-in-charge
2
22500
45000
... More
LIS;Suppling of Spares suitable suitable for Submersible Motor pump Set & Induction Motor @10% on equipment cost and as directed by Engineer-in-charge
2
225000
450000
... More
LIS;Design, Supply of brand new Submersible Motor pump Set with 0.23 cumecs discharge and 100 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
2250000
4500000
... More
LIS;Erection Testing and commissioning of star delta starter panel with all connections etc., as per specifications furnished in the tender schedule approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
2
20000
40000
... More
LIS;Supplying of T&P for star delta starter panel suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
2
2000
4000
... More
LIS;Supplying of Spares for star delta starter panel suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
2
20000
40000
... More
LIS;Design and Supply of new star delta starter panel suitable for Submersible Motor pump Set with all connections etc., as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
200000
400000
... More
LIS;Erection, Testing and Commissioning of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves as per approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
4
20600
82400
... More
LIS;Supplying of T&P for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
4
2060
8240
... More
LIS;Supplying of Spares for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
4
20600
82400
... More
LIS;Design, Supply of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves of 350mm for discharge of 0.31 cumecs for each pump dia as SSR 2024-25 suitable for Submersible Motor pump Set as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
4
206000
824000
... More
LIS;Erection, Testing and Commissioning of Submersible Motor pump Set with 0.31 cumecs discharge and 60 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification @10% on quipment cost and as directed by Engineer-in-charge
2
135000
270000
... More
LIS;Supplying T&P suitable for Submersible Motor pump & Induction Motor @ 1% on equipment cost and as directed by Engineer-in-charge
2
13500
27000
... More
LIS;Suppling of Spares suitable suitable for Submersible Motor pump Set & Induction Motor @10% on equipment cost and as directed by Engineer-in-charge
2
135000
270000
... More
LIS;Design, Supply of brand new Submersible Motor pump Set with 0.31 cumecs discharge and 60 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
1350000
2700000
... More
LIS;Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding transportation etc., complete 100 MM dia & 20Kgs/cm2 . Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
1
92129
92129.72
... More
LIS;Manufacture, supply and delivery of 400mm dia 15Kg/cm2 zero velocity valve/ PSLV with CI body with flanged ends as per AWWA, ex-factory excluding transportation etc., complete.Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
1
143034
143034.41
... More
LIS;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept.Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
2
57128
114256.7
... More
LIS;Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. excluding transportation etc., complete. Dia in mm. 250 MM & PN30.Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
2
149818
299637.52
... More
LIS;Manufacture, Supply, delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) of 200 mm dia PN 10 (scour valves for drainning water from barrel) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including cost and conveyanece.
2
56311
112623.82
... More
LIS;Valves & M.S specials for for submersible pumps and manfold chambers and control room
9
155198
1396782.9
... More
LIS;Painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts (Upstream surface of gates portion may be painted with solventless coaltar epoxy brown paint instead of solventless coaltar black. The rate for coaltar epoxy brown shall be adopted in data for Upstream side painting)
1247.76
642
801561.02
... More
LIS;Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts.
1247.76
684
853592.62
... More
LIS;Providing 25 mm thick guniting to sides and arch of tunnel in cement mortar 1 : 3 proportion by weight including cost of all materials, machinery, labour, ventilation, lighting, drainage and all other ancillary operations etc., complete with lead upto 1 km and all lifts.
1223.89
814
996491.24
... More
LIS;Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.
4075
1173
4779975
... More
LIS;Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.
250
1481
370250
... More
LIS;Manufacture, supply and delivery of M.S Pipes conforming to IS 3589/2001 including cost of all materials,labour charges, transportation to anywhere in T.G, but excluding all taxes. and Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.-600mm dia 8mm thick
4075
13786
56177950
... More
LIS;Manufacture, supply and delivery of M.S Pipes conforming to IS 3589/2001 including cost of all materials,labour charges, transportation to anywhere in T.G, but excluding all taxes. and Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.-700mm dia 8mm thick
250
15914
3978500
... More
LIS;Supply and fixing of Gate of size 3.60 x1.50 m in two leaves frame made with 75x75x6 mm angles alround and welded with 16 mm dia rods at 100 mm c/c on both ways including handle and hold fasts.etc complete.
2
20957
41915.4
... More
LIS;Supply and erecting of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge TBSCE. II-04
119.52
685
81883.15
... More
LIS;Supply and fixing of structral steel including all materials and labour charges like cutting,welding,bending etc for finished item of work
4.19
150539
630762.18
... More
LIS;Painting with Synthetic Enamel paints - Two Coats - For New Iron Work BLD-CSTN-12-12-197
27.3
126
3464.37
... More
LIS;Providing and fixing of Casement/ Openable Windows made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6? (152.4mm) pitch etc., complete Single shutter Window without vertical mullion for size 2?0?x4?0? TBSC MI-05
5.76
7717
44455.1
... More
LIS;Supply & fixing of 3.00m x3.00m size Rolling shutters made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 TBSC-E.I-01
5.25
5217
27390.3
... More
LIS;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for outside of Control panel room BLD-CSTN-12-5
228.6
231
52852.32
... More
LIS;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls for inside of Control panel room BLD-CSTN-12-1
210.6
133
28157.22
... More
LIS;Providing 20 mm thick plastering in cement mortar 1:3 proportion by volume including cost of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc., complete with initial lead upto 50 m and all lifts for even surface of brick walls (outside) IRR-CCDW-4-9
228.6
369
84444.84
... More
LIS;Providing 12 mm thick plastering in cement mortar 1:4 proportion by volume including cost of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc., complete with initial lead upto 50 m and all lifts for even surface of brick walls (Inside) IRR-CCDW-4-7
210.6
265
55830.06
... More
LIS;Brick Masonry in CM (1:6) with Bricks traditional size 23 x 11 x 7 cms 2nd class BLD-CSTN-5-4
29.47
7590
223692.04
... More
LIS;Supply and spreding of 40 mm hbg metal
44.91
2047
91948.73
... More
LIS;Benching to embakment
17600
9
158400
... More
LIS;Providing and constructing -coursed rubble stone masonry with approved stones in CM 1 : 4 proportion for sub-structure portions of return walls / abutments etc., including cost of all materials, machinery, labour, scaffolding, cleaning, packing cement mortar, wedging stone chips, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 133 kg / cum of masonry, rubble stones : 0.85cum, FA : 0.40 cum, Stone Chips : 0.15 cum) IRR-CCDW-4-3
12.38
4319
53475.41
... More
LIS;Providing and constructing un-coursed rubble stone masonry with approved stones in CM 1 : 4 proportion for sub-structure portions of return walls / abutments etc., including cost of all materials, machinery, labour, scaffolding, cleaning, packing cement mortar, wedging stone chips, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 143 kg / cum of masonry, rubble stones : 0.85cum, FA : 0.40 cum, Stone Chips : 0.15 cum) IRR-CCDW-4-1
16.5
3460
57104.85
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) IRR-CCDW-2-10
250.18
7026
1757814.72
... More
LIS;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size aggregates for foundation filling including cost of all materials, machinery, labour, formwork,approved, clean, hard, graded cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 260 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) IRR-CCDW-2-3
125.09
5899
737955.95
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for columns and beams including cost of all materials, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating,machinery,finishing, curing etc.,complete with initial lead upto 50 m and all lifts. If water is to be brought from other place add only lead charges @ 500 ltr / cum.(Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) IRR-CCDW-2-28
16.53
9641
159377.3
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for deck slab & kerb including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) IRR-CCDW-2-25
26.99
11172
301553.87
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for slabs for small culverts span upto 2-4 mts including cost of all materials,machinery, labour, formwork,scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. If water is to be brought from other place add only lead charges @ 500 ltr / cum. (Cement content: 330 kg / cum, CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum).(Slab) IRR-CCDW-2-27
2.38
9523
22665.93
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for well steining including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. If water is to be brought from other place add only lead charges @ 500 ltr / cum. (Cement content: 320 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA-50:30:20, FA : 0.4 cum) IRR-CCDW-2-14
165.02
7940
1310275.3
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. ( Cement content : 220 kg / cum) (Cement content: 310 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20 FA : 0.40cum). IRR-CCDW-2-7
267.12
6318
1687824.43
... More
LIS;Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than 10 N / sq mm) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 220 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) IRR- CCDW- 2-5
124.37
5548
690042.07
... More
LIS;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with initial lead upto 50 and all lifts. IRR- CCDW- 2-1
39.77
72575
2886307.75
... More
LIS;Providing casing embankment using semi-pervious soil available from excavation in layers of 25 to 30 cm before compaction including cost of all materials, machinery, labour, all other operations such as re-excavation, sorting out, transportation, spreading in layers of specified thickness, breaking clods, sectioning, watering, compacting to specified density control of not less than 95 percent using Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller as stipulated etc., complete with initial lead upto 1 km and all lifts.. IRR-DAW-5-4
20888.97
240
5032152.87
... More
LIS;Providing semi-pervious / pervious casing embankment using soil from approved borrow area in layers of 25 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sortingout, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting to density control of not less than 98 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with initial lead upto 1 km and all lifts. IRR-CAW-2-3
3010.56
265
798400.51
... More
LIS;Filling foundation wells with sand in layers of 25 to 30 cm and compacting by watering, ramming as directed including cost of all materials, machinery, labour etc., complete with initial lead upto 50 m and all lifts. IRR-CCDW-3-2
1323.38
1158
1533135.73
... More
LIS;Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. For foundations of canal cross drainage and other appurtenant structures and placing the excavated rock neatly in specified dump area or stack yard as directed etc., complete with initial lead upto 50 m and initial lift upto 3 m. IRR-CCDW-1-6
5855.67
842
4933401.97
... More
LIS;Cutting and removing jauliflora bushes upto 1.5 m girth excluding removal of stumps and including burning or disposing off the materials as directed with initial lead upto 50 m and all lifts. IRR PWM-1-8
6438
23
153868.2
... More
LIS;Clearing thin jungle growth ( less than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete. IRR-PMW-1-2
22173.97
3
82043.69
... More
LIS;Clearing thin jungle growth ( more than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete. IRR-PMW-1-1
13592.85
2
32622.84
... More
LIS;Excavation in all kinds of soil including boulders up to 0.3m dia meter for canal,,seating of embankment,filter drains/catch water drains etc including dressing bed and sides to required level and profile,cost of all materials,machinery,labour,placing the excavated soil neatly in dump area or for the formation of service road/embankment as directed etc., complete with initial lead upto 1km and all lifts. IRR-CAW 1-1
2813.4
132
373056.84
... More
LIS;Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. IRR-CCDW-1-2
2877
124
356748
... More
LIS;Insurance @ 1% on total cost of equipment on (Common items)and as directed by the Engineer-In - Charge.
1
14600
14600
... More
LIS;Freight charges @ 1% on total cost of equipment on ( Common items) and as directed by the Engineer-In - Charge.
1
14600
14600
... More
LIS;Erection, Testing and Commissioning of Miscellaneous items complete as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
1302
1302
... More
LIS;Supplying of T&P for Miscellaneous items complete @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
130
130.2
... More
LIS;Supplying of Spares for Miscellaneous items complete @10% on equipment cost and as directed by the Engineer-In - Charge.
1
1302
1302
... More
LIS;Supplying of Miscellaneous items complete as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
13020
13020
... More
LIS;Erection, Testing and Commissioning of 415V Capacitor Banks as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2500
2500
... More
LIS;Supplying of T&P for 415VCapacitor Banks @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
250
250
... More
LIS;Supplying of Spares for 415 V Capacitor Banks @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2500
2500
... More
LIS;Design and supplying of 415V Capacitor Banks as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
25000
25000
... More
LIS;Erection, Testing and Commissioning of Fire Protection System as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
200
200
... More
LIS;Supplying of T&P for Fire Protection System @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
20
20
... More
LIS;Supplying of Spares for Fire Protection System @10% on equipment cost and as directed by the Engineer-In - Charge.
1
200
200
... More
LIS;Design and supplying of Fire Protection System as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
2000
2000
... More
LIS;Erection, Testing and Commissioning of Power House Earthing materials as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2000
2000
... More
LIS;Supplying of T&P for earthing materials @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
200
200
... More
LIS;Supplying of Spares for earthing materials @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2000
2000
... More
LIS;Design and supplying of Power House Earthing materials as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
20000
20000
... More
LIS;Erection, Testing and Commissioning of Lighting along with necessary auaxilaries for complete pumphouse which includes control room, pump floor, Auxilary bay , maintenance bay complete as per design @10% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Supplying of T&P for Lighting @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
50
50
... More
LIS;Supplying of Spares for Lighting @10% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Design and Supplying of Lighting along with necessary auxilaries for complete pumphouse which includes control room, pump floor, Auxilary bay , maintenance bay complete as per design and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Erection, Testing and Commissioning of 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. suitable for pumps with all accessories etc complete as per approved Drawings and Specification @ 10% on equipment cost and as directed by the Engineer-in-charge
1
25000
25000
... More
LIS;Supplying of T&P for 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. @ 1% on equipment cost and as directed by the Engineer-in-charge
1
2500
2500
... More
LIS;Supplying of Spares for 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. @10% on equipment cost and as directed by the Engineer-in-charge
1
25000
25000
... More
LIS;Design,Supply of 100 AH, 24V D.C Batteries with Battery Charger suitable for pumps with all accessories etc complete as per approved Drawings and Specification and as directed by the Engineer-in-charge
1
250000
250000
... More
LIS;Erection, Testing and Commissioning of station auxiliary board (415 V) as per approved designs and specifications @ 10% on equipment cost and as directed by Engineer-in- Charge
1
100000
100000
... More
LIS;Supplying of T&P for station auxiliary board (415 V) @ 1% on equipment cost and as directed by Engineer-in- Charge
1
10000
10000
... More
LIS;Supplying of Spares for station auxiliary board (415 V) @10% on equipment cost and as directed by Engineer-in- Charge
1
100000
100000
... More
LIS;Design and Supply of Station Auxillary Board (415V)as per approved designs and specifications complete and as directed by Engineer-in- Charge with i) 400A ACBs incoming feeders from 250 KVA transformer- 2 Nos ii) 400A Bus Coupler -1 Nos iii) 150A MCBs outcoming feeders - 3 Nos (2 for motors and one spare) iv) 63A ACBs outcoming feeders - 2 Nos v) 32A ACBs outcoming feeders - 4 Nos
1
1000000
1000000
... More
LIS;Insurance @ 1% on total cost of all equipment (on unitized items) and as directed by Engineer-in- Charge
1
36770
36770
... More
LIS;Freight charges @ 1% on total cost of all Equipment (on unitized items) and as directed by Engineer-in- Charge
1
36770
36770
... More
LIS;Erection, Testing and Commissioning of Miscellaneous items completecomplete as per approved designs and drawings, specifications @ 10% on equipment cost and as directed by Engineer-in- Charge
1
3280
3280
... More
LIS;Supplying of T&P for Miscellaneous items complete@ 1% on equipment cost and as directed by Engineer-in- Charge
1
328
328
... More
LIS;Supplying of Spares for Miscellaneous(Unforeseen) items complete @10% on equipment cost and as directed by Engineer-in- Charge
1
3280
3280
... More
LIS;Supplying of Miscellaneous (Unforeseen) items complete @ 1% on total equipment cost as per approved designs and drawings and as directed by Engineer-in- Charge
1
32800
32800
... More
LIS;Erection, Testing and Commissioning of Control Cables including cable trays, laying of cables etc as per approved design and technical specifications and @ 02% on equipment cost and as directed by Engineer-in- Charge
1
10000
10000
... More
LIS;Supplying of T&P for Control Cables including cable trays, laying of cables @ 1% on equipment cost and as directed by Engineer-in- Charge
1
1000
1000
... More
LIS;Supplying of Spares for Control Cables including cable trays, laying of cables @10% on equipment cost and as directed by Engineer-in- Charge
1
10000
10000
... More
LIS;Design, Supply of Control Cables including cable trays, laying of cables etc as per approved design and Technical Specifications and as directed by Engineer-in- Charge
1
100000
100000
... More
LIS;Erection, Testing and Commissioning of L.T. 415V Power Cables as per approved design and Technical Specifications etc., @ 10% on equipment cost and as directed by Engineer-in- Charge
1
50000
50000
... More
LIS;Supplying of T&P for L.T. 415V Power Cables @ 1% on equipment cost and as directed by Engineer-in- Charge
1
5000
5000
... More
LIS;Supplying of Spares for L.T. 415V Power Cables @10% on equipment costand as directed by Engineer-in- Charge
1
50000
50000
... More
LIS;Design, Supply of L.T. 415V Power Cables as per approved design and technical specifications and as directed by Engineer-in- Charge
1
500000
500000
... More
LIS;Erection Testing and commissioning of star delta starter panel with all connections etc., as per specifications furnished in the tender schedule approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
2
15000
30000
... More
LIS;Supplying of T&P for star delta starter panel suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
2
1500
3000
... More
LIS;Supplying of Spares for star delta starter panel suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
2
15000
30000
... More
LIS;Design and Supply of new star delta starter panel suitable for Submersible Motor pump Set with all connections etc., as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
150000
300000
... More
LIS;Erection, Testing and Commissioning of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves as per approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
4
3250
13000
... More
LIS;Supplying of T&P for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
4
325
1300
... More
LIS;Supplying of Spares for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
4
3250
13000
... More
LIS;Design, Supply of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves of 200mm for discharge of 0.11 cumecs for each pump dia as SSR 2024-25 suitable for Submersible Motor pump Set as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
4
32500
130000
... More
LIS;Erection, Testing and Commissioning of Submersible Motor pump Set with 0.11 cumecs discharge and 50 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification @10% on quipment cost and as directed by Engineer-in-charge
2
112500
225000
... More
LIS;Supplying T&P suitable for Submersible Motor pump & Induction Motor @ 1% on equipment cost and as directed by Engineer-in-charge
2
11250
22500
... More
LIS;Suppling of Spares suitablefor Submersible Motor pump Set & Induction Motor @10% on equipment cost and as directed by Engineer-in-charge
2
112500
225000
... More
LIS;Design, Supply of brand new Submersible Motor pump Set with 0.11 cumecs discharge and 50 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
1125000
2250000
... More
LIS;Insurance @ 1% on total cost of equipment on (Common items)and as directed by the Engineer-In - Charge.
1
31730
31730
... More
LIS;Freight charges @ 1% on total cost of equipment on (Common items) and as directed by the Engineer-In - Charge.
1
31730
31730
... More
LIS;Erection, Testing and Commissioning of Miscellaneous items complete as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2830
2830
... More
LIS;Supplying of T&P for Miscellaneous items complete @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
283
283
... More
LIS;Supplying of Spares for Miscellaneous items complete @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2830
2830
... More
LIS;Supplying of Miscellaneous items complete as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
28300
28300
... More
LIS;Erection, Testing and Commissioning of 415V Capacitor Banks as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Supplying of T&P for 415VCapacitor Banks @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Supplying of Spares for 415 V Capacitor Banks @10% on equipment cost and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Design and supplying of 415V Capacitor Banks as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
50000
50000
... More
LIS;Erection, Testing and Commissioning of Fire Protection System as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Supplying of T&P for Fire Protection System @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
50
50
... More
LIS;Supplying of Spares for Fire Protection System @10% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Design and supplying of Fire Protection System as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Erection, Testing and Commissioning of Power House Earthing materials as per approved designs and drawings @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2000
2000
... More
LIS;Supplying of T&P for earthing materials @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
200
200
... More
LIS;Supplying of Spares for earthing materials @10% on equipment cost and as directed by the Engineer-In - Charge.
1
2000
2000
... More
LIS;Design and supplying of Power House Earthing materials as per approved designs and drawings and as directed by the Engineer-In - Charge.
1
20000
20000
... More
LIS;Erection, Testing and Commissioning of Lighting along with necessary auaxilaries for complete pumphouse which includes control room, pump floor, Auxilary bay , maintenance bay complete as per design @10% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Supplying of T&P for Lighting @ 1% on equipment cost and as directed by the Engineer-In - Charge.
1
50
50
... More
LIS;Supplying of Spares for Lighting @10% on equipment cost and as directed by the Engineer-In - Charge.
1
500
500
... More
LIS;Design and Supplying of Lighting along with necessary auxilaries for complete pumphouse which includes control room, pump floor, Auxilary bay , maintenance bay complete as per design and as directed by the Engineer-In - Charge.
1
5000
5000
... More
LIS;Erection, Testing and Commissioning of 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. suitable for pumps with all accessories etc complete as per approved Drawings and Specification @ 10% on equipment cost and as directed by the Engineer-in-charge
1
25000
25000
... More
LIS;Supplying of T&P for 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. @ 1% on equipment cost and as directed by the Engineer-in-charge
1
2500
2500
... More
LIS;Supplying of Spares for 100 AH, 24V D.C Battery with Battery Charger D.C.D.B. @10% on equipment cost and as directed by the Engineer-in-charge
1
25000
25000
... More
LIS;Design,Supply of 100 AH, 24V D.C. Batteries with Battery Charger suitable for pumps with all accessories etc complete as per approved Drawings and Specification and as directed by the Engineer-in-charge
1
250000
250000
... More
LIS;Erection, Testing and Commissioning of station auxiliary board (415 V) as per approved designs and specifications @ 10% on equipment cost and as directed by Engineer-in- Charge
1
250000
250000
... More
LIS;Supplying of T&P for station auxiliary board (415 V) @ 1% on equipment cost and as directed by Engineer-in- Charge
1
25000
25000
... More
LIS;Supplying of Spares for station auxiliary board (415 V) @10% on equipment cost and as directed by Engineer-in- Charge
1
250000
250000
... More
LIS;Design and Supply of Station Auxillary Board (415V)as per approved designs and specifications complete and as directed by Engineer-in- Charge with i) 630A ACBs incoming feeders from 400 KVA transformer - 2 Nos ii) 630A ACBs Bus coupler - 1 No iii) 250A MCCBs outcoming feeder - 3 Nos (2 for motors and one spare) iv) 63A ACBs outcoming feeder - 4 Nos v) 32A ACBs outcoming feeder - 4 Nos
1
2500000
2500000
... More
LIS;Insurance @ 1% on total cost of all equipment (on unitized items) and as directed by Engineer-in- Charge
1
57790
57790
... More
LIS;Freight charges @ 1% on total cost of all Equipment (on unitized items) and as directed by Engineer-in- Charge
1
57790
57790
... More
LIS;Erection, Testing and Commissioning of Miscellaneous items completecomplete as per approved designs and drawings, specifications @ 10% on equipment cost and as directed by Engineer-in- Charge
1
5155
5155
... More
LIS;Supplying of T&P for Miscellaneous items complete@ 1% on equipment cost and as directed by Engineer-in- Charge
1
515
515.5
... More
LIS;Supplying of Spares for Miscellaneous(Unforeseen) items complete @10% on equipment cost and as directed by Engineer-in- Charge
1
5155
5155
... More
LIS;Supplying of Miscellaneous (Unforeseen) items complete @ 1% on total equipment cost as per approved designs and drawings and as directed by Engineer-in- Charge
1
51550
51550
... More
LIS;Erection, Testing and Commissioning of Control Cables including cable trays, laying of cables etc as per approved design and technical specifications and @ 02% on equipment cost and as directed by Engineer-in- Charge
1
10000
10000
... More
LIS;Supplying of T&P for Control Cables including cable trays, laying of cables @ 1% on equipment cost and as directed by Engineer-in- Charge
1
1000
1000
... More
LIS;Supplying of Spares for Control Cables including cable trays, laying of cables @10% on equipment cost and as directed by Engineer-in- Charge
1
10000
10000
... More
LIS;Design, Supply of Control Cables including cable trays, laying of cables etc as per approved design and Technical Specifications and as directed by Engineer-in- Charge
1
100000
100000
... More
LIS;Erection, Testing and Commissioning of L.T. 415V Power Cables as per approved design and Technical Specifications etc., @ 10% on equipment cost and as directed by Engineer-in- Charge
1
60000
60000
... More
LIS;Supplying of T&P for L.T. 415V Power Cables @ 1% on equipment cost and as directed by Engineer-in- Charge
1
6000
6000
... More
LIS;Supplying of Spares for L.T. 415V Power Cables @10% on equipment costand as directed by Engineer-in- Charge
1
60000
60000
... More
LIS;Design, Supply of L.T. 415V Power Cables as per approved design and technical specifications and as directed by Engineer-in- Charge
1
600000
600000
... More
LIS;Erection Testing and commissioning of star delta starter panel with all connections etc., as per specifications furnished in the tender schedule approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
2
22500
45000
... More
LIS;Supplying of T&P for star delta starter panel suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
2
2250
4500
... More
LIS;Supplying of Spares for star delta starter panel suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
2
22500
45000
... More
LIS;Design and Supply of new star delta starter panel suitable for Submersible Motor pump Set with all connections etc., as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
225000
450000
... More
LIS;Erection, Testing and Commissioning of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves as per approved drawings and Specification @ 10% on equipment cost and as directed by Engineer-in-charge
4
4500
18000
... More
LIS;Supplying of T&P for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @ 1% on equipment cost and as directed by Engineer-in-charge
4
450
1800
... More
LIS;Supplying of Spares for Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves suitable for Submersible Motor pump Set @10% on equipment cost and as directed by Engineer-in-charge
4
4500
18000
... More
LIS;Design, Supply of Gate Valve(soft seated) & Resilent seated soft sealing gate valves and Sluice valves of 250mm dia for discharge of 0.16 cumecs for each pump as SSR 2024-25 suitable for Submersible Motor pump Set as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
4
45000
180000
... More
LIS;Erection, Testing and Commissioning of Submersible pump Set with 0.16 cumecs discharge and 85 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification @10% on quipment cost and as directed by Engineer-in-charge
2
191250
382500
... More
LIS;Supplying of T&P suitable for Submersible Motor pump & Induction Motor @ 1% on equipment cost and as directed by Engineer-in-charge
2
19125
38250
... More
LIS;Suppling of Spares suitablefor Submersible pump Set & Induction Motor @10% on equipment cost and as directed by Engineer-in-charge
2
191250
382500
... More
LIS;Design, Supply of brand new Submersible pump Set with 0.16 cumecs discharge and 85 KW induction motor with all associated auxilaries and all associated equipment suitable for 415 V terminal voltage as per specifications furnished in the tender schedule etc complete as per approved drawings and Specification and as directed by Engineer-in-charge
2
1912500
3825000
... More
LIS;Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding transportation etc., complete 100 MM dia & 20Kgs/cm2 . Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
2
92129
184259.4
... More
LIS;Manufacture, supply and delivery of 400mm dia 15Kg/cm2 zero velocity valve/ PSLV with CI body with flanged ends as per AWWA, ex-factory excluding transportation etc., complete.Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
2
143034
286068.8
... More
LIS;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept.Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
4
57128
228513.2
... More
LIS;Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. excluding transportation etc., complete. Dia in mm. 250 MM & PN30.Add 5% Extra on basic cost towords Conveyance of valves and including loading at factory and unloading, stacking at site of work & Add 13.615% Extra towords contractor's profit and overheads.
4
149818
599275.2
... More
LIS;Manufacture, Supply, delivery and fixing of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) of 200 mm dia PN 10 (scour valves for drainning water from barrel) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including cost and conveyanece.
4
56311
225247.6
... More
LIS;Valves & M.S specials for for submersible pumps and manfold chambers and control room
18
155198
2793565.8
... More
LIS;Painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts (Upstream surface of gates portion may be painted with solventless coaltar epoxy brown paint instead of solventless coaltar black. The rate for coaltar epoxy brown shall be adopted in data for Upstream side painting) IRR-GAW-3-2
510.5
642
327945.2
... More
LIS;Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. IRR-GAW-3-1
510.5
741
378739.95
... More
LIS;Providing 25 mm thick guniting to sides and arch of tunnel in cement mortar 1 : 3 proportion by weight including cost of all materials, machinery, labour, ventilation, lighting, drainage and all other ancillary operations etc., complete with lead upto 1 km and all lifts. IRR-TAW-2-2
523.16
820
429043.52
... More
LIS;Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.
900
949
854100
... More
LIS;Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.
2000
949
1898000
... More
LIS;Manufacture, supply and delivery of M.S Pipes conforming to IS 3589/2001 including cost of all materials,labour charges, transportation to anywhere in T.G, but excluding all taxes. and Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.-400mm dia 8mm thick
900
9371
8433900
... More
LIS;Manufacture, supply and delivery of M.S Pipes conforming to IS 3589/2001 including cost of all materials,labour charges, transportation to anywhere in T.G, but excluding all taxes. and Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing.-500mm dia 8mm thick
2000
11605
23210000
... More
LIS;Supply and fixing of Gate of size 3.60 x1.50 m in two leaves frame made with 75x75x6 mm angles alround and welded with 16 mm dia rods at 100 mm c/c on both ways including handle and hold fasts.etc complete.
4
20957
83830.8
... More
LIS;Supply and erecting of Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge TBSCE. II-04
239.04
685
163766.3
... More
LIS;Supply and fixing of structral steel including all materials and labour charges like cutting,welding,bending etc for finished item of work
4.28
150539
644310.77
... More
LIS;Painting with Synthetic Enamel paints - Two Coats - For New Iron Work BLD-CSTN-12-12-197
9.45
126
1199.3
... More
LIS;Providing and fixing of Casement/ Openable Windows made of pre-painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277, finish painted with a polyester paint and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6? (152.4mm) pitch etc., complete Single shutter Window without vertical mullion for size 2?0?x4?0? TBSC-M.I-05
5.76
7717
44455.1
... More
LIS;Supply & fixing of 3.00m x3.00m size Rolling shutters made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 TBSC-E.I-01
9.45
5217
49302.54
... More
LIS;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for outside of Control panel roomBLD-CSTN-12-5
278.72
231
64440.06
... More
LIS;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls for inside of Control panel room BLD-CSTN-12-1
265.59
133
35509.38
... More
LIS;Providing 20 mm thick plastering in cement mortar 1:3 proportion by volume including cost of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc., complete with initial lead upto 50 m and all lifts for even surface of brick walls (outside) IRR-CCDW-4-9
278.72
373
104157.66
... More
LIS;Providing 12 mm thick plastering in cement mortar 1:4 proportion by volume including cost of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc., complete with initial lead upto 50 m and all lifts for even surface of brick walls (Inside) IRR-CCDW-4-7
265.59
267
71071.88
... More
LIS;Brick Masonry in CM (1:5) with Bricks traditional size 23 x 11 x 7 cms 2nd class BLD-CSTN-5-4
40.79
7629
311186.91
... More
LIS;Supply and spreding of 40 mm hbg metal
89.82
2109
189448.34
... More
LIS;Benching to embakment
5057
9
45513
... More
LIS;Providing and constructing -coursed rubble stone masonry with approved stones in CM 1 : 4 proportion for sub-structure portions of return walls / abutments etc., including cost of all materials, machinery, labour, scaffolding, cleaning, packing cement mortar, wedging stone chips, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 133 kg / cum of masonry, rubble stones : 0.85cum, FA : 0.40 cum, Stone Chips : 0.15 cum) IRR-CCDW-4-3
22.59
4425
99969.79
... More
LIS;Providing and constructing un-coursed rubble stone masonry with approved stones in CM 1 : 4 proportion for sub-structure portions of return walls / abutments etc., including cost of all materials, machinery, labour, scaffolding, cleaning, packing cement mortar, wedging stone chips, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 143 kg / cum of masonry, rubble stones : 0.85cum, FA : 0.40 cum, Stone Chips : 0.15 cum) IRR-CCDW-4-1
30.12
3572
107615.75
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) IRR-CCDW-2-10
147.21
7140
1051197.17
... More
LIS;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size aggregates for foundation filling including cost of all materials, machinery, labour, formwork,approved, clean, hard, graded cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 260 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) IRR-CCDW-2-3
73.6
6007
442181.44
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for columns and beams including cost of all materials, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating,machinery,finishing, curing etc.,complete with initial lead upto 50 m and all lifts. If water is to be brought from other place add only lead charges @ 500 ltr / cum.(Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement),CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) IRR-CCDW-2-28
14.38
9756
140295.59
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for deck slab & kerb including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. (Cement content: 330 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum) IRR-CCDW-2-25
30.75
11287
347087.55
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for slabs for small culverts span upto 2-4 mts including cost of all materials,machinery, labour, formwork,scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. If water is to be brought from other place add only lead charges @ 500 ltr / cum. (Cement content: 330 kg / cum, CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum).(Slab) IRR-CCDW-2-27
2.72
9637
26214.54
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for well steining including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. If water is to be brought from other place add only lead charges @ 500 ltr / cum. (Cement content: 320 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA-50:30:20, FA : 0.4 cum) IRR-CCDW-2-14
216.96
8048
1746224.26
... More
LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts. ( Cement content : 220 kg / cum) (Cement content: 310 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20 FA : 0.40cum). IRR-CCDW-2-7
243.21
6427
1563134.99
... More
LIS;Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than 10 N / sq mm) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.(Cement content: 220 kg / cum with use of super plasticiser(0.4% by wt. of cement), CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum) IRR- CCDW- 2-5
136.48
5656
772040.06
... More
LIS;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with initial lead upto 50 and all lifts. IRR- CCDW- 2-1
39.51
72575
2867728.55
... More
LIS;Providing casing embankment using semi-pervious soil available from excavation in layers of 25 to 30 cm before compaction including cost of all materials, machinery, labour, all other operations such as re-excavation, sorting out, transportation, spreading in layers of specified thickness, breaking clods, sectioning, watering, compacting to specified density control of not less than 95 percent using Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller as stipulated etc., complete with initial lead upto 1 km and all lifts.. IRR-DAW-5-4
24947.34
240
6009814.21
... More
LIS;Providing semi-pervious / pervious casing embankment using soil from approved borrow area in layers of 25 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sortingout, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting to density control of not less than 98 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with initial lead upto 1 km and all lifts. IRR-CAW-2-3
1654.96
265
438895.39
... More
LIS;Filling foundation wells with sand in layers of 25 to 30 cm and compacting by watering, ramming as directed including cost of all materials, machinery, labour etc., complete with initial lead upto 50 m and all lifts. IRR-CCDW-3-2
921.76
1360
1254146.66
... More
LIS;Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. For foundations of canal cross drainage and other appurtenant structures and placing the excavated rock neatly in specified dump area or stack yard as directed etc., complete with initial lead upto 50 m and initial lift upto 3 m. IRR-CCDW-1-6
4074.73
842
3432960.02
... More
LIS;Cutting and removing jauliflora bushes upto 1.5 m girth excluding removal of stumps and including burning or disposing off the materials as directed with initial lead upto 50 m and all lifts. IRR PWM-1-8
4104
23
98085.6
... More
LIS;Clearing thin jungle growth ( less than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete. IRR-PMW-1-2
11458.11
3
42395.01
... More
LIS;Clearing thin jungle growth ( more than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete. IRR-PMW-1-1
8966.53
2
21519.67
... More
LIS;Excavation in all kinds of soil including boulders up to 0.3m dia meter for canal,,seating of embankment,filter drains/catch water drains etc including dressing bed and sides to required level and profile,cost of all materials,machinery,labour,placing the excavated soil neatly in dump area or for the formation of service road/embankment as directed etc., complete with initial lead upto 1km and all lifts. IRR-CAW 1-1
2805.76
132
372043.78
... More
LIS;Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. IRR-CCDW-1-2
1873.85
124
232357.4
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%