Irrigation And CAD Department Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
516708Bid Award Id
ViewTender No
05/2024-25, Dt. 10.06.2024.Tender Authority
Irrigation And CAD Department ViewPurchaser Address
-Website
http://https://irrigation.telangana.gov.in/icad/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
BETTETHANDA LIS (NEW);Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for Intake Well & Intake Pipe line etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated rock in dump area or for formation of service road as directed etc., complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Intake Well & Intake Pipe line).
350
274
95935
BETTETHANDA LIS (NEW);Excavation in hard rock by blasting including boulders above 1.2 m dia. for Intake Well & Intake Pipe line etc., including levelling bed by removing all projections by hammering / chiselling, cost of all materials, machinery, labour, placing the excavated rock neatly in approved dump area and levelling the same as directed etc.,complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Intake Well & Intake Pipe line).
466
402
187332
BETTETHANDA LIS (NEW);Excavation in ordinary rock (including HDR) without blasting including boulders above 0.30 m upto 0.6 m dia. for pressuremain etc., including dressing of bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated soft rock neatly in dump area or for formation of service road as directed etc., complete with a lead upto 2 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Pressure Main).
5418
195
1059219
BETTETHANDA LIS (NEW);Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for pressuremain etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated rock in dump area or for formation of service road as directed etc., complete with a lead upto 2 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Pressure Main).
1548
290
450313
BETTETHANDA LIS (NEW);Earth work in excavation in all kinds of soils of foundation of delivery cistern, Jack well & Pumphouse structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material, complete for finished item of work as directed by the Engineer-in-Charge. Excavation for Structures- Mechanical Means
4891
123
602571
BETTETHANDA LIS (NEW);Excavation in ordnary rock without blasting for foundations of Jack well, Pumphouse & Delivery Cistern and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.(Use For Jack well, Pumphouse & Delivery Cistern).
4773
157
749361
BETTETHANDA LIS (NEW);Excavation in hard rock requiring blasting including boulders above 0.6 m upto 1.2 m dia. for foundations of Jack well, Pumphouse & Delivery Cistern and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.
1602
543
869886
BETTETHANDA LIS (NEW);Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for foundations of Jack well, Pumphouse, Pressuremain& Delivery Cistern and other appurtenant structures and placing the excavated rock neatly in specified dump area or stack yard as directed etc., complete with a lead upto 2 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.
594
870
516780
BETTETHANDA LIS (NEW);Providing hearting / casing embankment with homogeneous soil from approved borrow areas in layers of 25 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting out, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting each layer to density control of not less than 95 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with a lead upto 5 km and all lifts. for formation of Approach road to Pumphouse, for finished item of work as directed by the Engineer-in-Charge.
11375
293
3335150
BETTETHANDA LIS (NEW);Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size aggregates for foundation filling including cost of all materials, machinery, labour, formwork,approved, clean, hard, graded cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
417
5680
2368894
BETTETHANDA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
135
6644
897008
BETTETHANDA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge. (ZV Valve, Delivery Cistern, Pumphouse & Jackwell)
2074
7291
15122571
BETTETHANDA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for deck slab & kerb including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
44
11494
505776
BETTETHANDA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates including cost of all materials, labour, machinery, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,complete for columns and beams, walls with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
124
9976
1237036
BETTETHANDA LIS (NEW);Providing and laying insitu M-20 (28 days cube compressive strength not less than 20 N /sqmm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for wearing coat including cost of all materials, machinery, labour, formwork,cleaning, batching, mixing, placing in position in alternate panels, levelling, compacting,finishing, curing, packing joints with asphalt mortar etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
6.6
6076
40107
BETTETHANDA LIS (NEW);Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required, tying with1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc.,complete with initial lead upto 50 and all lifts, for finished item of work as directed by the Engineer-in-Charge.
269414
84
22873249
BETTETHANDA LIS (NEW);Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.
17822
602
10728844
BETTETHANDA LIS (NEW);Painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts, for finished item of work as directed by the Engineer-in-Charge.
8579
606
5200590
BETTETHANDA LIS (NEW);Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) Excluding transportation & taxes. S/S Non - Pressure 1400 mm Dia. NP3 Class, for finished item of work as directed by the Engineer-in-Charge.
100
19943
1994330
BETTETHANDA LIS (NEW);Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring) including transportation but excluding taxes. the Rubber Rings shall be tested at the factory premises conforming to B.I.S. 5382/1985. 1400 mm Dia. NP3 Class, for finished item of work as directed by the Engineer-in-Charge.
41
2098
86039
BETTETHANDA LIS (NEW);Fabrication,Supply and fixing of Trash rack, Shutters, etc., including cost of Mild Steel, Structural steel i.e., Angles, Channels & I-Sections, cutting, bending, welding, transportation, fixing in position etc., complete for finished item of work as directed by the Engineer in charge.
1551
117
181467
BETTETHANDA LIS (NEW);Fabrication, Supply and fixing of MS Manifold including cost of MS plates and cutting, bending, welding, transportation, fixing in position etc., complete for finished item of work as directed by the Engineer in charge.
17646
154
2726307
BETTETHANDA LIS (NEW);RR Masonry in CM (1:6) etc., complete including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge.
90
4315
388413
BETTETHANDA LIS (NEW);Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms etc., complete including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge.
126
8134
1024884
BETTETHANDA LIS (NEW);Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing, including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge.
1143
468
535838
BETTETHANDA LIS (NEW);Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing, including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge.
1143
448
512407
BETTETHANDA LIS (NEW);Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls, for finished item of work as directed by the Engineer-in-Charge.
2286
220
503834
BETTETHANDA LIS (NEW);Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec:1108, as directed by the Engineer-in-Charge.
17.5
5217
91301
BETTETHANDA LIS (NEW);Supply and fabrication of stainless steel railing works using Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade stainless steel welding rods including buffing, polishing, lacquer finishing, to present seamless finish including labour charges, complete for finished item of work as directed by the Engineer-in-Charge.
322.6
718
231627
BETTETHANDA LIS (NEW);Supply of 24" (600mm) Wall mounting /Pedestal Air Circulators, as directed by the Engineer-in-Charge. Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix / RR.
2
9050
18101
BETTETHANDA LIS (NEW);Supply & fixing of Galvanized powder coated Casement Windows with open able shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3 of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self-expanding screws, complete for finished item of work including of all taxes - 1220 x 1372 or below size, complete for finished item of work as directed by the Engineer-in-Charge.
12
7709
92519
BETTETHANDA LIS (NEW);Providing & constructing Sand filling below foudation including cost of all materials, machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
1511
1753
2649236
BETTETHANDA LIS (NEW);Manufacture, supply and delivery of MS pipes confirming to IS 3589/2001 of 1000mm Dia 10mm thick pipe including cost of all materials, machinery, labour and transportation any where in TG etc., complete as per specifications and approved drawings and as directed by the Engineer-in-Charge.
2650
29698
78701290
BETTETHANDA LIS (NEW);Providing 25 mm thick guniting to sides and arch of tunnel in cement mortar 1 : 3 proportion by weight including cost of all materials, machinery, labour, ventilation, lighting, drainage and all other ancillary operations etc., complete with lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.
8496
652
5543640
BETTETHANDA LIS (NEW);Supply & fixing of Wire Mesh for guniting to the outer sides of MS pipe, for finished item of work as directed by the Engineer-in-Charge.
8496
284
2412864
BETTETHANDA LIS (NEW);Cost of Laying, Jointing, Hydrostatic Filed Test Pressure for 1000mm 10mm thick MS pipe, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing, for finished item of work as directed by the Engineer-in-Charge. (For 1000 mm Dia. 10 mm Dia thick MS Pipe)
2650
2647
7015080
BETTETHANDA LIS (NEW);Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding transportation etc., complete. 10Kg/Sq cm, 150 mm dia, for finished item of work as directed by the Engineer-in-Charge.
14
110705
1549873
BETTETHANDA LIS (NEW);Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993, excluding cost of MS specials including cost and conveyance to site etc., complete.450 mm diax 18 mm thick, for finished item of work as directed by the Engineer-in-Charge.
40
8651
346072
BETTETHANDA LIS (NEW);Manufacture, Supply and delivery of zero velocity valve/ PSLV with MS Fabricated Body with Plain ends. as per AWWA, Ex-factory excluding transportation etc. Complete. For 1000mm dia 10 kg/cm2, for finished item of work as directed by the Engineer-in-Charge.
2
507463
1014927
BETTETHANDA LIS (NEW);Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 0.0 M to 1.0 M, for finished item of work as directed by the Engineer-in-Charge.
545
414
226012
BETTETHANDA LIS (NEW);Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 1.0 M to 2.0 M, as directed by the Engineer-in-Charge.
506
490
248345
BETTETHANDA LIS (NEW);Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 2.0 M to 3.0 M, as directed by the Engineer-in-Charge.
908
571
518922
BETTETHANDA LIS (NEW);Removal of unsuitable / Unserviceable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 MORD / 301 MORTH, for finished item of work as directed by the Engineer-in-Charge.
51
104
5335
BETTETHANDA LIS (NEW);Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges and contractors profit, for finished item of work as directed by the Engineer-in-Charge.
2160
39
84240
BETTETHANDA LIS (NEW);Cost of Machine End pair (Socket +Spigot) with 100mm length MS Barrel on each side of Socket and Spigot for providing M.S Specials on PSC pipelines excluding cost of M.S Specials & Taxes but including cost of conveyance to site etc., complete.1400 mm Dia. 6kg/cm2, for finished item of work as directed by the Engineer-in-Charge.
6
61539
369238
BETTETHANDA LIS (NEW);Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge. (CC Road)
3375
6646
22432950
BETTETHANDA LIS (NEW);Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Plain ended pipes conforming to B.I.S 458/2003, Ex-factory, Excluding transportation & taxes. R.C.C. PLAIN ENDED PIPES 1000 mm Dia. NP3 Class, for finished item of work as directed by the Engineer-in-Charge.
37.5
9499
356228
BETTETHANDA LIS (NEW);Laying and jointing 1000 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ), machinery, labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge. (Using For NP-3 Pipe)
10
1212
12129
BETTETHANDA LIS (NEW);Providing homogeneous embankment using soil from approved borrow area in layers of 25 to 30 cm Before compaction including cost of all materials, machinery, labour, all operations such as compacting to density control of not less than 90 percent or as stipulated using 2T roller etc., complete with initial lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge. ( For Pressuremain)
5460
208
1139502
BETTETHANDA LIS (NEW);Lowering the 1400 mm dia RCC S/S pipes carefully into the ready made trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water lead upto 500 meters excluding cost of rubber rings as per BIS No. 783/1985, for finished item of work as directed by the Engineer-in-Charge.
41
849
34842
BETTETHANDA LIS (NEW);Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-factory excluding transportation & taxes, for the following field test pressures.(the manufacture shall design the pipes as per the IS Code 784-2001) 1400 mm Dia. 6kg/cm2, for finished item of work as directed by the Engineer-in-Charge. (Used for Gravity Main)
520
18677
9712456
BETTETHANDA LIS (NEW);Cost of laying jointing, testing to hydrostatic field test pressure including cost of rubber rings, cost of transportation of water and emptying pipe line after completion of field testing etc. 1400 mm Dia. 6kg/cm2, for finished item of work as directed by the Engineer-in-Charge. (Used for Gravity Main)
520
1374
714844
BETTETHANDA LIS (NEW);Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS :4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes.250 mm Dia. 4kg/cm2, for finished item of work as directed by the Engineer-in-Charge. (Used for Gravity Main)
580
1007
584524
BETTETHANDA LIS (NEW);Labour charges for laying, fixing and commissioning the PVC pipes including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice.250 mm Dia. 4kg/cm2, for finished item of work as directed by the Engineer-in-Charge. (Used for Gravity Main)
580
111
64554
BETTETHANDA LIS (NEW);A. Unitised Items (3X440KW = 1320KW) Manufacture, Supply, Delivery,Placing in position, Testing and Commissioning of Vertical turbine pump with 0.48 cumecs discharge and 440kW induction motor with 11kV terminal voltage, along with associated auxilaries and all associated equipment, as directed by the Engineer-in-Charge.
3
4725000
14175000
BETTETHANDA LIS (NEW);a) Non Return Valves of 450mm for discharge of 0.53cumecs for each pump dia as per SSR 2023-24
3
211000
633000
BETTETHANDA LIS (NEW);b) Gate valve of 450mm or discharge of 0.53 cumecs for each pump dia as per SSR 2023-24
3
372000
1116000
BETTETHANDA LIS (NEW);c) FCMA starter panel
3
500000
1500000
BETTETHANDA LIS (NEW);d) HT and LT power cables i) HT power cables
1
400000
400000
BETTETHANDA LIS (NEW);ii) L.T 415V power cables
1
400000
400000
BETTETHANDA LIS (NEW);iii) control cables including cable trays laying of cables etc
1
200000
200000
BETTETHANDA LIS (NEW);Miscellaneous (uniforeseen) items cost @1% on equipment cost (i.e., on Sl.No. 58 to Sl.No 62)
1
185000
185000
BETTETHANDA LIS (NEW);Spares @ 10% on equipment cost (i.e., on Sl.No.58 to Sl.No 63)
1
1866000
1866000
BETTETHANDA LIS (NEW);Add T&P @ 1% on equipment cost (i.e., on Sl.No.58 to Sl.No 63)
1
187000
187000
BETTETHANDA LIS (NEW);Freight .@ 1% on total cost of equipment (i.e., on Sl.No.58 to Sl.No 65)
1
207000
207000
BETTETHANDA LIS (NEW);Erection, Testing and commissioning @ 10% of cost of equipment (i.e., on Sl.No.58 to Sl.No 63)
1
1866000
1866000
BETTETHANDA LIS (NEW);B. Common Items (3X440KW = 1320KW) 11KV HT panels i) 2 Nos.150A incoming feeders from 2000KVA tranformer ii)100A outgoing feeders -4 Nos.( 3 No.s for motors+ 1 No. spare) iii)100A ACBs outcoming feeder -3 Nos iv) 63A ACBs outgoing feeder - 3 Nos v) 32A ACBs outgoing feeder -3 Nos
1
4000000
4000000
BETTETHANDA LIS (NEW);415V Station Auxiliary Board
1
2000000
2000000
BETTETHANDA LIS (NEW);Lighting
1
50000
50000
BETTETHANDA LIS (NEW);Power House Earthing
1
100000
100000
BETTETHANDA LIS (NEW);100AH, 110V Battery with Battery Charger with D.C.D.B
1
2500000
2500000
BETTETHANDA LIS (NEW);63KVA D.G set, with AMF panel
1
1000000
1000000
BETTETHANDA LIS (NEW);Fire Protection System
1
200000
200000
BETTETHANDA LIS (NEW);250 KVA Auxiliary Transformer dry type with off load taps 11KV (2No's- 1 set)
1
1000000
1000000
BETTETHANDA LIS (NEW);11KV & 415V capacitor banks
1
250000
250000
BETTETHANDA LIS (NEW);Miscellaneous items @ 1% on total cost of equipment (i.e., on Sl.No.68 to Sl.No 76)
1
111000
111000
BETTETHANDA LIS (NEW);Spares @ 10% on equipment cost (i.e., on Sl.No.68 to Sl.No 77)
1
1121000
1121000
BETTETHANDA LIS (NEW);Add T&P @ 1% on equipment cost (i.e., on Sl.No.68 to Sl.No 77)
1
112000
112000
BETTETHANDA LIS (NEW);Freight Charges@ 1% on total cost of equipment (i.e., on Sl.No.68 to Sl.No 79)
1
124000
124000
BETTETHANDA LIS (NEW);Erection, Testing and commissioning @ 10% of cost of equipment (i.e., on Sl.No.68 to Sl.No 77)
1
1121000
1121000
BETTETHANDA LIS (NEW);d) Instrumentation cables
1
50000
50000
REDLAKUNTA LIS (NEW);Clearing thin jungle growth ( more than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete for finished item of work as directed by the Engineer-in-Charge. (For Intake Pipe Line & Pump House)
500
2
1150
REDLAKUNTA LIS (NEW);Excavation in all kinds of soil including boulders upto 0.3 m diameter for canal, seating of embankment, filter drains, catch water drains etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated soil neatly in dump area or for the formation of service road / embankment as directed etc., complete with initial lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge. (For Intake Well & Intake Pipe line)
11010
131
1446714
REDLAKUNTA LIS (NEW);Excavation in ordinary rock (including HDR) without blasting including boulders above 0.30 m upto 0.6 m dia. for canal, seating of embankment, filter drains, catch water drains etc., including dressing of bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated soft rock neatly in dump area or for formation of service road as directed etc., complete with a lead upto 1 km and all lifts for finished item of work as directed by the Engineer-in-Charge. (For Intake Well & Intake Pipe line)
205
178
36511
REDLAKUNTA LIS (NEW);Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for canal, seating of embankment, filter drains, catch water drains etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated rock in dump area or for formation of service road as directed etc., complete with a lead upto 1 km and all lifts for finished item of work as directed by the Engineer-in-Charge (For Intake Well & Intake Pipe line)
165
274
45227
REDLAKUNTA LIS (NEW);Excavation in hard rock by blasting including boulders above 1.2 m dia. for canals, seating, embankment etc., including levelling bed by removing all projections by hammering / chiselling, cost of all materials, machinery, labour, placing the excavated rock neatly in approved dump area and levelling the same as directed etc.,complete with a lead upto 1 km and all lifts for finished item of work as directed by the Engineer-in-Charge. (For Intake Well & Intake Pipe line)
98
402
39396
REDLAKUNTA LIS (NEW);Excavation in ordinary rock (including HDR) without blasting including boulders above 0.30 m upto 0.6 m dia. for canal, seating of embankment, filter drains, catch water drains etc., including dressing of bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated soft rock neatly in dump area or for formation of service road as directed etc., complete with a lead upto 1 km and all lifts for finished item of work as directed by the Engineer-in-Charge. (Total Lead 2km including intial lead 1 km) (For Pressure Main)
15204
195
2972382
REDLAKUNTA LIS (NEW);Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia.for canal, seating of embankment, filter drains, catch water drains etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated rock in dump area or for formation of service road as directed etc., complete with a lead upto 1 km and all lifts for finished item of work as directed by the Engineer-in-Charge.(Total Lead 2km including intial lead 1 km) (For Pressure Main)
17376
290
5054678
REDLAKUNTA LIS (NEW);Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material, complete for finished item of work as directed by the Engineer-in-Charge. Excavation for Structures- Mechanical Means (For Jack well, Pumphouse & Delivery Cistern)
932
123
114822
REDLAKUNTA LIS (NEW);Excavation in ordnary rock without blasting for foundations of Canal cross drainage and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.(Use For Jack well, Pumphouse & Delivery Cistern).
939
157
147423
REDLAKUNTA LIS (NEW);Excavation in hard rock requiring blasting including boulders above 0.6 m upto 1.2 m dia. for foundations of Canal cross drainage and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge. (For Jack well, Pumphouse & Delivery Cistern)
301
543
163443
REDLAKUNTA LIS (NEW);Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for foundations of Canal cross drainage and other appurtenant structures and placing the excavated rock neatly in specified dump area or stack yard as directed etc., complete with initial lead upto 50 m and initial lift upto 3m, for finished item of work as directed by the Engineer-in-Charge.(Total Lead 2 km including intial lead) (For Jack well, Pumphouse, Pressuremain& Delivery Cistern)
234
870
203580
REDLAKUNTA LIS (NEW);Providing hearting / casing embankment with homogeneous soil from approved borrow areas in layers of 25 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting out, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting each layer to density control of not less than 95 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with a lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge. (For formation of Approach road to Pumphouse.) (Total Lead 5 km including intial lead 1 km)
1725
293
505770
REDLAKUNTA LIS (NEW);Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size aggregates for foundation filling including cost of all materials, machinery, labour, formwork,approved, clean, hard, graded cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge. ( For Delivery Cistern)
819
6071
4972231
REDLAKUNTA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge. (For Pumphouse & Intake)
182
7034
1280334
REDLAKUNTA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge. (ZV Valve, Delivery Cistern, Pumphouse & Jackwell)
2358
7681
18113684
REDLAKUNTA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for deck slab & kerb including cost of all materials,machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Pumphouse)
17
11862
201664
REDLAKUNTA LIS (NEW);Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates including cost of all materials, labour, machinery, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,complete for columns and beams, walls with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Pumphouse)
41
10343
424096
REDLAKUNTA LIS (NEW);Providing and laying insitu M-20 (28 days cube compressive strength not less than 20 N /sqmm) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for wearing coat including cost of all materials, machinery, labour, formwork,cleaning, batching, mixing, placing in position in alternate panels, levelling, compacting,finishing, curing, packing joints with asphalt mortar etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.(For Delivery Cistern)
10
6444
64445
REDLAKUNTA LIS (NEW);Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required, tying with1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc.,complete with initial lead upto 50 and all lifts, for finished item of work as directed by the Engineer-in-Charge
232142
84
19708856
REDLAKUNTA LIS (NEW);Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge. (Gates, Suction & Delivery Pipes)
16868
602
10154536
REDLAKUNTA LIS (NEW);Painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts for finished item of work as directed by the Engineer-in-Charge.
16868
606
10225382
REDLAKUNTA LIS (NEW);Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) Excluding transportation & taxes, S/S Non - Pressure 1600 mm Dia. NP3 Class, as directed by the Engineer-in-Charge
150
26265
3939825
REDLAKUNTA LIS (NEW);Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubber ring) including transportation but excluding taxes. the Rubber Rings shall be tested at the factory premises conforming to B.I.S. 5382/1985. 1600 mm Dia. NP3 Class, as directed by the Engineer-in-Charge
61
2562
156282
REDLAKUNTA LIS (NEW);Laying and jointing 1600 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ), machinery, labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge
61
1531
93434
REDLAKUNTA LIS (NEW);Fabrication,Supply and fixing of Trash rack, Shutters, Gantry girder etc., including cost of Mild Steel, Structural steel i.e., Angles, Channels & I-Sections, cutting, bending, welding, transportation, fixing in position etc., complete for finished item of work as directed by the Engineer in charge.
1524
117
178308
REDLAKUNTA LIS (NEW);Fabrication, Supply and fixing of MS Pipes & Manifold including cost of MS plates and cutting, bending, welding, transportation, fixing in position etc., complete for finished item of work as directed by the Engineer in charge.
37987
154
5868992
REDLAKUNTA LIS (NEW);RR Masonry in CM (1:6) etc., complete including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge
124
4758
589992
REDLAKUNTA LIS (NEW);Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms etc., complete including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge
146
8149
1189754
REDLAKUNTA LIS (NEW);Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing, including cost and conveyance of all materials, labour charges, for finished item of work as directed by the Engineer-in-Charge
632
471
297672
REDLAKUNTA LIS (NEW);Plastering with CM 2 coats, 12 mm thick, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing, including cost and conveyance of all materials, labour charges., for finished item of work as directed by the Engineer-in-Charge
632
449
284337
REDLAKUNTA LIS (NEW);Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls, as directed by the Engineer-in-Charge (For Pumphouse)
1264
220
278586
REDLAKUNTA LIS (NEW);Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec:1108, as directed by the Engineer-in-Charge
18
5217
93910
REDLAKUNTA LIS (NEW);Supply of Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304 Grade, as directed by the Engineer-in-Charge.
334
718
239812
REDLAKUNTA LIS (NEW);Supply of 24" (600mm) Wall mounting /Pedestal Air Circulators, as directed by the Engineer-in-Charge. Makes : Crompton / Havells Turbo Force / Orient / Almonard / Panasonic / Halonix / RR.
2
9050
18101
REDLAKUNTA LIS (NEW);Supply & fixing of Galvanized powder coated Casement Windows with open able shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3 of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self-expanding screws, complete for finished item of work including of all taxes - 1220 x 1372 or below size, for finished item of work as directed by the Engineer-in-Charge
12
7709
92519
REDLAKUNTA LIS (NEW);Providing & constructing Sand filling below foudation including cost of all materials, machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge
2180
1972
4299396
REDLAKUNTA LIS (NEW);Manufacture, supply and delivery of MS pipes confirming to IS 3589/2001 of 1100mm Dia 12mm thick pipe including cost of all materials, machinery, labour and transportation any where in TG etc., complete as per specifications and approved drawings for finished item of work as directed by the Engineer-in-Charge
4500
39232
176547150
REDLAKUNTA LIS (NEW);Providing 25 mm thick guniting to sides and arch of tunnel in cement mortar 1 : 3 proportion by weight including cost of all materials, machinery, labour, ventilation, lighting, drainage and all other ancillary operations etc., complete with lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge
15899
659
10477441
REDLAKUNTA LIS (NEW);Supply & fixing of Wire Mesh for guniting to the outer sides of MS pipe, for finished item of work as directed by the Engineer-in-Charge
15899
284
4515316
REDLAKUNTA LIS (NEW);Cost of Laying, Jointing, Hydrostatic Filed Test Pressure for 1100mm 12mm thick MS pipe, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing, for finished item of work as directed by the Engineer-in-Charge (For 1100 mm Dia. 12 mm Dia thick MS Pipe)
4500
2812
12654000
REDLAKUNTA LIS (NEW);Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding transportation etc., complete. 10Kg/Sq cm, 150 mm dia, for finished item of work as directed by the Engineer-in-Charge
12
110705
1328462
REDLAKUNTA LIS (NEW);Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 excluding cost of MS specials including cost and conveyance to site etc., complete.450 mm diax 18 mm thick, for finished item of work as directed by the Engineer-in-Charge
64
8651
553715
REDLAKUNTA LIS (NEW);Manufacture, Supply and delivery of zero velocity valve/ PSLV with MS Fabricated Body with Plain ends. as per AWWA, Ex-factory excluding transportation etc. Complete. For 1100mm dia 10 kg/cm2, for finished item of work as directed by the Engineer-in-Charge
2
646531
1293062
REDLAKUNTA LIS (NEW);Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 0.0 M to 1.0 M , for finished item of work as directed by the Engineer-in-Charge
133
414
55155
REDLAKUNTA LIS (NEW);Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 1.0 M to 2.0 M, for finished item of work as directed by the Engineer-in-Charge
119
490
58405
REDLAKUNTA LIS (NEW);Bailing out water for earth work excavation /concrete for foundation below water level. (For building items only) - Other than sandy soil - 2.0 M to 3.0 M, for finished item of work as directed by the Engineer-in-Charge
92
571
52578
REDLAKUNTA LIS (NEW);Removal of unsuitable / Unserviceable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 MORD / 301 MORTH, for finished item of work as directed by the Engineer-in-Charge.
63
104
6590
REDLAKUNTA LIS (NEW);Laying of Sand Bags in the stipulated places including cost of empty cement bag, sand, thread, stitching charges and labour charges etc., with 13.615% overhead charges and contractors profit, for finished item of work as directed by the Engineer-in-Charge
2852
39
111228
REDLAKUNTA LIS (NEW);Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge (CC Road)
675
7037
4750110
REDLAKUNTA LIS (NEW);Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Plain ended pipes conforming to B.I.S 458/2003, Ex-factory, Excluding transportation & taxes. R.C.C. PLAIN ENDED PIPES 1000 mm Dia. NP3 Class, for finished item of work as directed by the Engineer-in-Charge
22.5
10127
227862
REDLAKUNTA LIS (NEW);Laying and jointing 1000 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ), machinery, labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge (Using For NP-3 Pipe)
6
1218
7308
REDLAKUNTA LIS (NEW);Providing homogeneous embankment using soil from approved borrow area in layers of 25 to 30 cm Before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting out, transportation, spreading soil in layer of specified thickness, breaking clods, sectioning,etc.,complete with initial lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge. (Including compacting to density control of not less than 90 percent or as stipulated using 2T roller) (Total Lead of 5 Km including initial lead 1 km)., (for back filling).
18690
208
3900603
REDLAKUNTA LIS (NEW);Manufacture, Supply, Delivery, Placing in position, Testing and commissioning of Vertical Turbine pump with 0.53 cumecs discharge and 405KW Induction Motor with 11kV Terminal voltage along with associated auxilaries and all associated equipment as directed by the Engineer-in-Charge.
4
6075000
24300000
REDLAKUNTA LIS (NEW);(a)Non Return Valves of 450mm for discharge of 0.53cumecs for each pump dia as per SSR 2023-24
4
211000
844000
REDLAKUNTA LIS (NEW);(b)Gate valve of 450mm or discharge of 0.53 cumecs for each pump dia as per SSR 2023-24
4
372000
1488000
REDLAKUNTA LIS (NEW);( c) FCMA starter panel
4
600000
2400000
REDLAKUNTA LIS (NEW);(d)HT and LT power cables (i) HT power cables
1
600000
600000
REDLAKUNTA LIS (NEW);(ii) L.T 415V power cables
1
600000
600000
REDLAKUNTA LIS (NEW);(iii) control cables including cable trays laying of cables etc
1
200000
200000
REDLAKUNTA LIS (NEW);(iv) Instrumentation cables
1
50000
50000
REDLAKUNTA LIS (NEW);Miscellaneous (uniforeseen) items cost @1% on equipment cost (on Sl.No.54 to 58)
1
304800
304800
REDLAKUNTA LIS (NEW);Spares @ 10% on equipment cost (on Sl.No.54 to 58)
1
3078700
3078700
REDLAKUNTA LIS (NEW);Add T&P @ 1% on equipment cost (on Sl.No.54 to 58)
1
307900
307900
REDLAKUNTA LIS (NEW);Freight @ 1% on total cost of equipment (on Sl.No.54 to 61)
1
341700
341700
REDLAKUNTA LIS (NEW);Erection, Testing and commissioning @ 10% of total cost of equipment (on Sl.No.54 to 58)
1
3078700
3078700
REDLAKUNTA LIS (NEW);11KV HT panels i) 2 Nos.150A incoming feeders from 2500KVA tranformer ii)100A outgoing feeders -5 Nos.( 4 No.s for motors+ 1 No. spare) iii)100A ACBs outcoming feeder -4 Nos iv) 63A ACBs outgoing feeder - 4 Nos v) 32A ACBs outgoing feeder -4 Nos
1
6000000
6000000
REDLAKUNTA LIS (NEW);415V Station Auxiliary Board
1
3000000
3000000
REDLAKUNTA LIS (NEW);Lighting
1
100000
100000
REDLAKUNTA LIS (NEW);Power House Earthing
1
200000
200000
REDLAKUNTA LIS (NEW);100AH, 110V Battery with Battery Charger with D.C.D.B
1
2500000
2500000
REDLAKUNTA LIS (NEW);63KVA D.G set, with AMF panel
1
1000000
1000000
REDLAKUNTA LIS (NEW);Fire Protection System
1
200000
200000
REDLAKUNTA LIS (NEW);250 KVA Auxiliary Transformer dry type with off load taps 11KV
1
1000000
1000000
REDLAKUNTA LIS (NEW);11KV & 415V capacitor banks
1
200000
200000
REDLAKUNTA LIS (NEW);Miscellaneous items @ 1% on total cost of equipment (on Sl.No.65 to 72)
1
142000
142000
REDLAKUNTA LIS (NEW);Spares @ 10% on equipment cost (on Sl.No.65 to 74)
1
1434200
1434200
REDLAKUNTA LIS (NEW);Add T&P @ 1% on equipment cost (on Sl.No.65 to 74)
1
143400
143400
REDLAKUNTA LIS (NEW);Freight Charges@ 1% on total cost of equipment (on Sl.No.65 to 76)
1
159200
159200
REDLAKUNTA LIS (NEW);Erection, Testing and commissioning @ 10% of cost of equipment (on Sl.No.65 to 74)
1
1434200
1434200
Nakkagudem LIS;Providing hearting / casing embankment with homogeneous soil from approved borrow areas in layers of 25 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting out, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting each layer to density control of not less than 95 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with initial lead upto 1 km and all lifts, and for finished item of work as directed by the Engineer-in-Charge.
23994
293
7035041
Nakkagudem LIS;Supply,transpotation,installation,testing and commissioning of HT OUTDOOR type single panel switchgear with VCB of floor mounted, metal clad 11KV, 630A, not less than 16 -KA (350 / 500 MVA) VCB Panel, with 1No VCBs totally enclosed and horizantal drawout type, horizontal isolation type breaker as per IS 13118 as amended upto date and additional specifications having capacities as mentioned below , single break trip free mechanism, motorised/manually charged and auto manually closing breaker suitable for use on 12KV , 3phase, 50HZ AC supply with self contained fully interlocked rackin and rackout mechanism air insulated allumium Busbars of 630A capacity, Breaker featured with ON/OFF indicator with hand trip device, spring relief coil, shunt trip coil and auxillary switch of 6NO + 6NC and equiped with following switchgears and accessories incomming connections suitable for 3x95Sqmm XLPE 11KV Cable as required etc complete with adaptor box for outgoing termination, and for finished item of work as directed by the Engineer-in-Charge. Makes: Kirloskar / Schneider / Siemens / Crompton Greaves / ABB
1
748546
748547
Nakkagudem LIS;Providing and fixing 25 mm dia 3 m long cold twisted deformed steel dowel bars with one end driven into 45 to 50 mm diameter 1.50 m deep hole drilled in bed rock and other end provided with L-bend for embedding in concrete / masonry of over flow / non-over flow blocks and other appertenant works including cost of drilling and cleaning hole, filling hole with cement mortar 1 : 1 proportion, driving anchor rod, cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lifts. and for finished item of work as directed by the Engineer-in-Charge.
600
1317
790620
Nakkagudem LIS;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept. and as directed by the Engineer-in-Charge.(300mm dia PN.1.6)
5
122713
613566
Nakkagudem LIS;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per requirement of the dept. and as directed by the Engineer-in-Charge. (150mm dia PN.1.6)
5
69150
345751
Nakkagudem LIS;Supply,transpotation,installation,testing and commissioning of HT INDOOR type single panel switchgear with VCB of floor mounted, metal clad 11KV, 630A, not less than 16 KA (350 / 500 MVA) VCB Panel,with 1No VCBs totally enclosed and horizantal drawout type, horizontal isolation type breaker as per IS 13118 as amended upto date and additional specifications having capacities as mentioned below , single break trip free mechanism, motorised/manually charged and auto manually closing breaker suitable for use on 12KV,3phase,50HZ AC supply with self contained fully interlocked rackin and rackout mechanism air insulated allumium Busbars of 630A capacity, Breaker featured with ON/OFF indicator with hand trip device, spring relief coil, shunt trip coil and auxillary switch of 6NO + 6NC and equiped with following switchgears and accessories incomming connections suitable for 3x95Sqmm XLPE 11KV Cable as required etc complete with adaptor box for outgoing termination, as directed by the Engineer-in-Charge. Makes: Kirloskar / Schneider / Siemens / Crompton Greaves / ABB
4
665374
2661500
Nakkagudem LIS;Supply and run of 2 of 22/0.3mm (1.50 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete for finished item of work as directed by the Engineer-in-Charge.
125
66
8263
Nakkagudem LIS;Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete on wall.
4
281
1126
Nakkagudem LIS;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete for finished item of work as directed by the Engineer-in-Charge.
4
134
538
Nakkagudem LIS;Supply and Fixing of 20mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles and decolam board for switches for Light, Fan and separate plug point including all labour charges etc., complete for finished item of work as directed by the Engineer-in-Charge.
125
86
10788
Nakkagudem LIS;Supply and transportation of 90 W +/-10% (>=9000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range, P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT:3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor must furnish the manufacturer warranty letter, LM 79 and LM 80 certificates as directed by the Engineer-in-Charge. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar /Eveready / Halonix / Keselec / HAVELLS /POLYCAB / SURYA / SYSKA./ Capart / FortuneArrt / FIEM / Arraystorm / GM / Goldmedal /Panasonic. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
5
8658
43293
Nakkagudem LIS;Supply and transportation of 12 W +/-10% (>= 1200 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5years warranty with BIS certification as directed by the Engineer-in-Charge. LUMINAIRE MAKE : Phillips / OSRAM / Wipro/ Crompton / Bajaj / Havells / Jaquar / IB LED /Panasonic / Halonix / HPL / Syska / Eveready /Surya / Keselec / FIEM / Arraystorm / GM /Goldmedal.LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
5
1457
7289
Nakkagudem LIS;Supply of Lubricants/ Gear oil as directed by the Engineer-in-Charge.
1000
286
286300
Nakkagudem LIS;Carryout routine maintenance and servicing of LT.Cubical pannel board having approximately 15 to 22 Nos of switches cleaning with power brower and servicing the contacts, tightning the connection of incoming and outgoing cables, and clicking the operating.machanism for smooth functioning of switches and putting them in smooth working condition, as directed by the Engineer-in-Charge.
4
3617
14470
Nakkagudem LIS;Supply and erection of LED indication lamps on the existing panel board, Makes : L&T / C&S / SALZAR / HPL/SIEMENS.wherever is necessary as directed by the Engineer-in-Charge.
30
177
5316
Nakkagudem LIS;Supply and erection of Selector switch for Voltmeter / Ammeter on the existing panel including connections etc., complete. on the existing panel board, as directed by the Engineer-in-Charge. Makes : L&T / C&S / SALZAR / HPL/SIEMENS.
6
230
1384
Nakkagudem LIS;Supply of Diesel as directed by the Engineer-in-Charge.
50
111
5555
Nakkagudem LIS;Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class A insulation having 2mm thickness up to 3.3KV, as directed by the Engineer-in-Charge.
8
5235
41883
Nakkagudem LIS;Supply of 6-32A SP MCB10KA, C/D Curve ISI Mark, as directed by the Engineer-in-Charge. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Crabtree.
3
351
1053
Nakkagudem LIS;Supply of Grease as directed by the Engineer-in-Charge.
50
329
16475
Nakkagudem LIS;Supply of 11 KV/22 KV Hand gloves, as directed by the Engineer-in-Charge.
10
322
3227
Nakkagudem LIS;Supply of G.I Bolts / Nuts and Washers, as directed by the Engineer-in-Charge.
40
118
4728
Nakkagudem LIS;Painting with Ready mixed oil paint (all colours) -Two Coats - Old Iron Work including remove all dirt and remains of loose powdered Material, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, as directed by the Engineer-in-Charge.
77.8
158
12316
Nakkagudem LIS;Supply & Fixing of G.I. Strip / Plate / Wire, as directed by the Engineer-in-Charge.
296.14
111
32960
Nakkagudem LIS;Supply & Fixing of Copper Plate / Strip / SWG wire No.8 / 10 / 14, as directed by the Engineer-in-Charge.
19.3
1186
22892
Nakkagudem LIS;Supply & Fixing of Heat shrinkable sleeves for the Bus bars above 70 Sq.mm, as directed by the Engineer-in-Charge.
40
34
1364
Nakkagudem LIS;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II), as directed by the Engineer-in-Charge.
5
10850
54251
Nakkagudem LIS;Supply and fixing of 33 KV 800A (Conv.) DB AB Switches with solid core insulators as directed by the Engineer-in-Charge.
5
46194
230973
Nakkagudem LIS;Supply and fixing of 33 KV PT (Single Phase) 10VA Burden 0.2 Class, as directed by the Engineer-in-Charge.
3
23145
69437
Nakkagudem LIS;Supply and fixing of 33 KV CTs 400-200-100/1-1A for HT Metering (0.2s class), as directed by the Engineer-in-Charge.
3
20445
61335
Nakkagudem LIS;Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11KV supply with necessary materials on existing cross arm, as directed by the Engineer-in-Charge.
9
2440
21965
Nakkagudem LIS;Supply of heavy duty long barrel aluminum lugs confirming to I.S specifications suitable for 50 Sq.mm cable etc complete with nuts,bolts and washers as directed by the Engineer-in-Charge. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department.
20
30
614
Nakkagudem LIS;Supply of Transformer oil tested as per IS-335 - 1972, as directed by the Engineer-in-Charge.
2600
160
416520
Nakkagudem LIS;Filtration of transformer oil as per ISS specifications filters to die electric strength above 40 KV--- at Site as directed by the Engineer-in-Charge.
350
13
4760
Nakkagudem LIS;Painting with 2 coats Zinchromate red oxide duly scraping existing paint followed by 2 coats of hammerton grey paint etc., complete.Upto 630 / 1000 KVA, as directed by the Engineer-in-Charge.
1
5353
5354
Nakkagudem LIS;Replacing old and unserviceable gasket of bushing for the following Transformer capacity Upto 500 / 1000 KVA L.T, as directed by the Engineer-in-Charge.
1
2038
2038
Nakkagudem LIS;Replacing old and unserviceable gasket of bushing for the following Transformer capacity Upto 500 / 1000 KVA H.T, as directed by the Engineer-in-Charge.
1
786
786
Nakkagudem LIS;Replacing old and unserviceable gasket of top cover plate of transformer having following capacity 500/1000 KVA, as directed by the Engineer-in-Charge.
1
1487
1487
Nakkagudem LIS;Testing of Insulation Resistance H.T. / LT copper / aluminium coils for Transformers, as directed by the Engineer-in-Charge.
1
428
428
Nakkagudem LIS;Routine maintenance of transformer in operation covering insulation resistance oil, break down strength, Reconditioning / replacement of silicazel, cleaning of transformer and topping upto oil level if required, as directed by the Engineer-in-Charge. (extra cost will be paid for oil).
1
6201
6201
Nakkagudem LIS;Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. and as directed by the Engineer-in-Charge. (400 MM dia PN-1.6)
1
256503
256504
Nakkagudem LIS;Manufacture, Supply and delivery of Cast Carbon Steel Bolted Cover Non Return Valve as per IS : 5312 / Part1 /2004. Round body heavy duty material spec. As per IS:1030/1998 with SS Hinge & Seat Rings. excluding transportation etc., complete as directed by the Engineer-in-Charge. (400 Dia in mm-PN 20)
1
223942
223943
Nakkagudem LIS;Servicing and replacement of spares for H.T.Panel includes repairing of battery backup, 1,Incomers, 4 motor feeders, tripping and interlock checking, relay checking draw out trucks for mechanical and electrical operations in test and service position including all required spares like tripping coils, closing coils, MCB's, Indication lamps,protection relays, wiring, contactors, spring charging motor etc., as directed by the Engineer-in-Charge.
1
200000
200000
Nakkagudem LIS;Supply of 530HP(395KW). The Motor shall be suitable for operation on 6.6KV ,3Phase, 50Hz HT Motor, 1500RPM(Syn.),1460RPM(Nominal) super enameled copper wire cost of insulation materials, labour charges for rewinding assembling of motor, reduction of burnt copper wire, trail run at site including cost of conveyance and as per specifications and as directed by the Engineer-in-Charge.
3
1500000
4500000
Nakkagudem LIS;servicing and rewinding of HP ( 395 KW) kirloscar Electric co.Ltd make, 1489 RPM, 8.8 KV, 3 Ph, 50HZ vertical solid shaft CACA type induction Motors Annual servicing. Greasing, Bearing testing, terminal box De carbonizing, checking, painting including repairing of and all required material, as directed by the Engineer-in-Charge.
1
500000
500000
Nakkagudem LIS;Servicing & Repairing of E.O.T Crane and O.H control panel & Pendant P.B station for all operations including all required sparesincluding motor if necessary, as directed by the Engineer-in-Charge.
1
50000
50000
Nakkagudem LIS;Servicing of 6.6KV CAPACITOR PANEL. (Includes Testing of Functions and Supply of Indication Lamps and Required Spare Etc..) as directed by the Engineer-in-Charge.
4
100000
400000
Nakkagudem LIS;Supply of 6.6kv, 395 kw Soft Starters, as directed by the Engineer-in-Charge.
4
530000
2120000
Nakkagudem LIS;Maintenance and Servicing of 33 KV/6.6KV & 415V Transformer yard Components . Cleaning of Yard Area , Additional Metal spreading If necessary , Checking the condition over head jumpers connections as directed by the Engineer-in-Charge.
1
100000
100000
Nakkagudem LIS;Servicing and replacement of fault components in C&R panel (like relays, TB's, Indication lamps, switches, MCB's) including all required spares etc.,of 33 KV, 400A VCB., as directed by the Engineer-in-Charge.
1
50000
50000
Nakkagudem LIS;Supply of 25A Standard 1NO + 1NC Trip - Neutral - Close coil., as directed by the Engineer-in-Charge.
4
1064
4256
Nakkagudem LIS;Supply & fixing of 86/VAJH13/F628 Tripping Relays, as directed by the Engineer-in-Charge.
4
7500
30000
Nakkagudem LIS;Supply & fixing of Trip Circuit Supervision Relay of Voltage rating 4/30/48 VDC, 110 VAC/DC, 220 VAC/DC., as directed by the Engineer-in-Charge.
4
5434
21736
Nakkagudem LIS;Supply & fixing of Micro-controller based advanced 85xx Process Scanner with rating of 85V to 265V AC 50Hz, +-0.1% FS fro 3 motors, as directed by the Engineer-in-Charge.
3
35000
105000
Nakkagudem LIS;Supply & fixing of motor protection relay SPAM 150 C make ABB for 4 motors, as directed by the Engineer-in-Charge.
4
68040
272160
Nakkagudem LIS;Complete Dismantling, Overhauling & Servicing to 50 mm Dia Air Cushion valves / Quick Released damped Air Valves (QRDA) including replacement of defective items if any i.e.,Float, Float guide, seat ring, Orifice, Orifice Cover, Pivot pin, and assembling of valve, testing, trail run at site and all other incidental charges etc, Complete for finished item of work as directed by the Engineer-in-Charge.
3
11000
33000
Nakkagudem LIS;Complete dismantling, Overhauling & Servicing to 150 /200 mm Dia Air Cushion valves / Quick Released damped Air Valves (QRDA) including replacement of defective items if any i.e.,Float, Float guide, seat ring, Orifice, Orifice Cover, Pivot pin, and assembling of valve, testing, trail run at site and all other incidental charges etc, Complete for finished item of work as directed by the Engineer-in-Charge.
5
11500
57500
Nakkagudem LIS;Supply of 150 MM dia air valve balls as directed by the Engineer-in-Charge.
25
2500
62500
Nakkagudem LIS;Disassembling of 400 mm dia Sluice valve, Overhauling & Servicing to valve including replacement of defective items if any i.e., Stem,Yoke Nut, Yoke Sleeve, Sleeve gland, Gland Bolt-Nut, Hinge pin, Bonnet Bolt- Nuts, Gaskets, Washers and assembling of valve, testing, trail run at site and all other incidental charges etc, as directed by the Engineer-in-Charge.
3
20000
60000
Nakkagudem LIS;Disassembling of 400 mm dia Non return valve, Overhauling & Servicing to valve including replacement of defective items if any i.e., Body seats, Hinge, Hinge Pin, Cottor pin, Stud bolts, Nuts, Gaskets, Washers and assembling of valve, erection on base plate, testing, trail run at site and all other incidental charges etc, as directed by the Engineer-in-Charge.
3
20000
60000
Nakkagudem LIS;Transport Up and Down
4
20000
80000
Nakkagudem LIS;Spiders with Rubber CI Molded
20
15000
300000
Nakkagudem LIS;Impeller New
8
95000
760000
Nakkagudem LIS;Pump Dismantling and Refitting
4
80000
320000
Nakkagudem LIS;Pump Nut Bolts
4
25000
100000
Nakkagudem LIS;Line shaft
20
55000
1100000
Nakkagudem LIS;S.S 410 Head shaft
24
45000
1080000
Nakkagudem LIS;T.T Nut sets
4
9500
38000
Nakkagudem LIS;Oil Tubes Dia 102x10mmx1500 long
40
9000
360000
Nakkagudem LIS;PB Guid Bush
40
8500
340000
Nakkagudem LIS;Pump Bowel Repair Pb Bush
8
8500
68000
Nakkagudem LIS;Pump Bowel Repair & Pb Neck Ring
4
14000
56000
Nakkagudem LIS;Supply and fixing of parts of WPIL make vertical turbine radial flow with 530 HP speed 1480 rpm , 13.74 Cusecs discharge at 74.83 M pumping head Over hauling of V.T Pumps:Pump Bearing Box,Oil Level Indicator, Ratchet Coupling unit, Pump & Motor alignment, Float adjustment,Gland packing replacement, Air release vavles,Water cooilng system, for proper starting and running including all required spares gland leakages, Suction column pipe water leakages and supply of required spare parts for Pumps as directed by the Engineer-in-Charge. (a)Berirng Box Repair, New Bearing 29432,16026, Bearing Charges and Hub, water cooling system fixing work
4
130000
520000
Nakkagudem LIS;Cost of M.S Flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to IS:7322-1985 and flange dimensions conforming to IS:1538-1993 excluding cost of MS specials including cost and conveyance to site etc., complete for finished item of work as directed by the Engineer-in-Charge. (1200 mm dia x 35 mm thick)
2
46254
92510
Nakkagudem LIS;Manufacture, Supply and delivery of zero velocity valve/ PSLV with MS Fabricated Body with Plain ends as per AWWA, Ex-factory including transportation etc. Complete for finished item of work as directed by the Engineer-in-Charge. (20 Kg/Sq cm, 1200 mm dia)
2
975157
1950315
Nakkagudem LIS;Cost of Laying, Jointing, Hydrostatic Filed Test Pressure for 1200mm 12mm thick MS pipe, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing, for finished item of work as directed by the Engineer-in-Charge.
4485
2904
13024440
Nakkagudem LIS;Supply & fixing of Wire Mesh 20 gauge for Providing guniting to the outer sides of MS pipe, as directed by the Engineer-in-Charge.
8625
284
2449500
Nakkagudem LIS;Providing 25 mm thick guniting to outer sides of Ms Pipe in cement mortar 1 : 3 proportion by weight including cost of all materials, machinery, labour and all other ancillary operations etc., complete with lead upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.
17254
685
11825892
Nakkagudem LIS;Manufacture, supply and delivery of MS pipes confirming to IS 3589/2001 of 1200mm Dia 12mm thick pipe including cost of all materials, machinery, labour and transportation any where in TG etc., complete as per specifications and approved drawing and as directed by the Engineer - in - Charge.
4485
42760
191779946
Nakkagudem LIS;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with initial lead upto 50 and all lifts as directed by the Engineer-in-Charge.
5338.4
84
453230
Nakkagudem LIS;Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works For including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
107
7664
820112
Nakkagudem LIS;Providing and laying insitu vibrated M-15 (28 days cube compressive strength not less than 15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for sub-structure / super- structure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
1829
7031
12860431
Nakkagudem LIS;Providing and laying insitu vibrated M-15 (28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
686
6216
4264245
Nakkagudem LIS;Providing & constructing Sand filling below foudation including cost of all materials, machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer-in-Charge.
1612
2204
3553170
Nakkagudem LIS;Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for Pressuremain etc., including dressing bed and sides to required level and profile, cost of all materials, machinery, labour, placing the excavated rock in dump area or for formation of service road as directed etc., complete with a lead upto 1 km and all lifts.
10123
274
2774714
Nakkagudem LIS;Excavation in ordnary rock without blasting for foundations of canal cross drainage and other appurtenant structures and placing the excavated stuff neatly in specified dump area or disposing off the same as directed etc., complete with initial lead upto 50 m and initial lift upto 3 m., for finished item of work as directed by the Engineer-in-Charge.
17714
157
2781098
Nakkagudem LIS;Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, for finished item of work as directed by the Engineer-in-Charge. (Depth upto 3 m)
23275
123
2867480
Nakkagudem LIS;Painting with Ready mixed oil paint (all colours) -Two Coats - Old Iron Work including remove all dirt and remains of loose powdered Material, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as directed by the Engineer-in-Charge.
53
140
7431
Nakkagudem LIS;Distempering, 2 Coats with Water Bound Distemper of approved quality to give an even shade after throughly brushing including removing and cleaning of all dirt and loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work as directed by the Engineer-in-Charge.
345
129
44574
Nakkagudem LIS;Painting of MS pipes & Specials etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts, for finished item of work as directed by the Engineer-in-Charge.
16913
606
10252661
Nakkagudem LIS;Cleaning for MS pipes & Specials etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts, for finished item of work as directed by the Engineer-in-Charge.
34001
602
20468602
Uttampadmavathi LIS;Dismantling of existing Horizontal centrigal pumps, overhauling the all spare parts, replacement of defective spares such as gunmetal bushes (logging rings), checknuts, pump glands, gland packing rope and re-allignment for 350X500 Spilt casing WPIL pump of 380 HP to operate on 3 phase 415V electrical capable of discharging 18.00 cusecs/509.69LPS at a total head of 107.58ft/32.80 mt and assembling of pump, erection on base plate, testing, alignment of motor-pump set, trail run at site and all other incidental charges etc, as directed by Engineer-In-Charge.
5
60000
300000
Uttampadmavathi LIS;i) Shaft with key - SS410
5
32625
163125
Uttampadmavathi LIS;ii) Sleeve - SS410
5
5300
26500
Uttampadmavathi LIS;iii) Impeller - FG260
5
584900
2924500
Uttampadmavathi LIS;iv) Neck ring - FG260
5
21600
108000
Uttampadmavathi LIS;v) Replacing of Bearings
5
45000
225000
Uttampadmavathi LIS;415V, 380 HP (285 KW), 988RPM, 3-Phase induction motor. a) Overhauling and servicing: Disassembling of burnt motor, testing of stator and rotor winding, checking of assembly parts, cleaning stator and rotor windings, varnishing of stator, overhauling of rotor, improving of IR values by heating, greasing to bearings, assembling the motor, installation and trial run at site, and all other incidental charges etc, as directed by Engineer-In-Charge.
4
90000
360000
Uttampadmavathi LIS;Rewinding to stator with new HTP make super enamled copper wire
4
265000
1060000
Uttampadmavathi LIS;Supply of bearing No. DE- 6322
4
32500
130000
Uttampadmavathi LIS;Supply of bearing No. NDE- 6319C3
4
19200
76800
Uttampadmavathi LIS;Manufacturing and supply of control panel board. The panel board should be metal clad, dust and vermin proof, floor mounted industrial type, indore type for controlling 5 Nos. of 380 HP HCF Pumps The panel board with accessories should internally wired neccessary earthing terminal shall be provided. The electrical system shall comply as per IE rules and relevant ISS. The thickness of sheets to be used for fabrication of panel board should be 16 guage. the cable boxes wherever necessary with adequate cabling space for termination of cable is to be provided. The details of the panel board are furnished in annexure, As directed by Engineer-In-Charge (a) Supply, transportation, erection and commissioning of indoor type LT panel board with 16 SWG sheet and suitable angle iron frame for fixing the following switch gear including cost and conveyance of all materials etc, complete for finished item of work.
1
400000
400000
Uttampadmavathi LIS;(b) For Bus Coupler : 1 Set The details of the component of panel board are as follows: a) 2500 Amps, Air Circuit Breaker, TP, Drawout Type, 50KA 3 Sec, Spring Charging Motor 230V AC, Tripping & Closing coil 110V DC, Drawout & Isolation Horizontal With Numerical Motor Protection relay and High Speed tripping relay with all protection and indication.
1
300000
300000
Uttampadmavathi LIS;(c) The details of the component of panel board are as follows: a) 2500 Amps, Air Circuit Breaker, TP, Fixed, 50KA, For incomer
2
300000
600000
Uttampadmavathi LIS;(d) Electrolytic quality aluminium bus bars. Size of Bus bars 2 Nos of 50 mm X 10 mm for 3 phases and 1 no of 50 X 10 mm for neutral with suitable insulators
1
175000
175000
Uttampadmavathi LIS;( e) Ammeters with selector switch of 0 - 2000 A (enlarged ) and 2000- 4000 Amps ( supressed ) , CT operated, square type
1
7500
7500
Uttampadmavathi LIS;(f) Voltmeter with selector switch of 0 - 500 V, Square type
1
7500
7500
Uttampadmavathi LIS;(g) For Motor Feeder - 5set The details of the component of panel board are as follows: a) 800 Amps, ACB's, TP, Drawout Type, 50KA 3 Sec, Spring Charging Motor 230V AC, Tripping & Closing Coil 110V DC, Draw Out & Isolation Horizontal With Numerical Motor Protection relay and High Speed tripping relay, fuses links with all protection and indication equipment.
5
235000
1175000
Uttampadmavathi LIS;(h) Ammeters with selector switch of 0 - 800 A (enlarged ) and 800 - 3000 Amps (supressed ), CT operated, square type
5
30000
150000
Uttampadmavathi LIS;(i) FCMA Iron Core Reactor type Starters confirming to IS5553 and relevent IEC Standards for controlling starting current of 380HP motors,5 nos, with starting current limited not more that 3.5IFL. FCMA Iron Core Reactor Starter shall consist of Epoxy resine casted Module with current controlling FCMA Winding and Inbuilt Vacuume Bypass device for Full voltage running to motor and all its controle circuitery.
5
500000
2500000
Uttampadmavathi LIS;(j) PF improving Capacitors 120 KVAR per each motor
5
85000
425000
Uttampadmavathi LIS;(k) Auxillary feeder with MCCB of 25A for Connecting Lighting and other Auxillary feeders.
5
15000
75000
Uttampadmavathi LIS;Complete dismantling, Overhauling & Servicing to 500 mm dia CI Sluice valve double flanged of type PN 1.60 including replacement of all defective items and assembling of valve, erection on base plate, testing, trail run at site and all other incidental charges etc, Complete for finished item of work as directed by Engineer-In-Charge.
5
75000
375000
Uttampadmavathi LIS;Complete dismantling, Overhauling & Servicing to 500 mm dia CI Non return valves PN 1.0 including replacement of defective items/warnout parts, sleaves, shaft and assembling of valve, erection on base plate, testing, trail run at site and all other incidental charges etc, Complete for finished item of work as directed by Engineer-In-Charge.
5
52000
260000
Uttampadmavathi LIS;Complete dismantling, Overhauling & Servicing to 200 mm Dia Air Cushion valves / Quick Released damped Air Valves (QRDA) including replacement of all defective items and assembling of valve, erection on base plate, testing, trail run at site and all other incidental charges etc, Complete for finished item of work as directed by Engineer-In-Charge.
8
18500
148000
Uttampadmavathi LIS;Disassembling of 1400 mm dia., 15kg/sqcm Zero Velocity valve, Overhauling & Servicing to valve including replacement of defective items if any i.e., Body seats, Hinge, Hinge Pin, Cottor pin, Stud bolts, Nuts, Gaskets, Washers and assembling of valve, erection on base plate, testing, trail run at site and all other incidental charges etc, Complete for finished item of workas directed by Engineer-In-Charge.
2
110000
220000
Uttampadmavathi LIS;Supply, Transportation, Installation, Testing and commissioning of DV Coupled set 10 HP Vacuum pump with motor, DV 50+ 10C4 Coupled set complete as per specification Make CRI/ Kirloskar Brothers Limited/ Crompton Greaves or equivalent, complete for finished item of work as directed by the Engineer-in-Charge.
2
100000
200000
Uttampadmavathi LIS;Supply, tranportation, Fixing & commissioning of Energy Efficient Totally Enclosed Fan Cooled (TEFC) 380 HP Squirrel Cage Induction Motors (IE2 ) (Enclosure confirming to protection IP55) Horizontal Foot Mounted Induction Motors, continuously rated suitable for operation on 415V+/-10%, 50Hz+/-5%, A.C. supply with class 'F' insulation for 50 Deg C ambient temperature and altitude less than 1000M above MSL and confirming to IEC:60034-1 & IS 12615:2018, complete for finished item of work. As directed by Engineer-In-Charge.
1
1140000
1140000
Uttampadmavathi LIS;Supply of 19 mm Gland Packing Rope as directed by Engineer-In-Charge.
50
780
39000
Uttampadmavathi LIS;Supply of Cotton Waste as directed by Engineer-In-Charge.
100
110
11000
Uttampadmavathi LIS;Supply of Digital Multi Function meter as directed by Engineer-In-Charge.
1
3500
3500
Uttampadmavathi LIS;Supply,transpotation,installation,testing and commissioning of HT OUTDOOR type single panel switchgear with VCB of floor mounted, metal clad 11KV, 630A, not less than 16 -KA (350 / 500 MVA) VCB Panel, with 1No VCBs totally enclosed and horizantal drawout type, horizontal isolation type breaker as per IS 13118 as amended upto date and additional specifications having capacities as mentioned below , single break trip free mechanism, motorised/manually charged and auto manually closing breaker suitable for use on 12KV , 3phase, 50HZ AC supply with self contained fully interlocked rackin and rackout mechanism air insulated allumium Busbars of 630A capacity, Breaker featured with ON/OFF indicator with hand trip device, spring relief coil, shunt trip coil and auxillary switch of 6NO + 6NC and equiped with following switchgears and accessories incomming connections suitable for 3x95Sqmm XLPE 11KV Cable as required etc complete with adaptor box for outgoing termination, as directed by Engineer-In-Charge. Makes: Kirloskar / Schneider / Siemens / Crompton Greaves / ABB. INCOMING- 11KV, 630A,not less than 16 KA VCB - 1No. (a)POTENTIAL TRANSFORMER : 11000 / 110 Volts PT, Class 1 accuracy, 100 VA burden with HT/LT fuses. Makes: ECS / SILKANS / PRAGATHI / NARAYAN POWER TECH or EQVT - 1 No. (b)Digital Voltmeter 0-15KV along with Selector switch and protection fuses/MCB for HT metering upto 15KV on incoming side - 1No Makes: CONZERV / ELMEASURE or EQVT (c) Dual core dual ratio Current transformers with 50 -- 300 A / 5 amp, 15VA burden and accuracy class 1 for metering & class 5P10 for protection - 3 Nos Makes : ECS / SILKANS / PRAGATHI / NARAYAN POWER TECH (d)0-300A Digital Type Ammeter with selector switch - 1No Makes : CONZERV / ELMEASURE or EQVT ( e)Microprocessor based non directional combined 2 over current & one earth fault relay - 1No Makes: EASUN REYROLLE or equivalent (f)POWER PACK: Supply, Installation, testing and commissioning of Power pack with 230V input and 110V DC continuous out put suitable for closing / tripping / indication of VCB with 2.5sqmm FRLS copper cable etc as required. (g)Master trip relay-1No Makes: EASUN REYROLLE or equivalent (Makes) (h)Three element transformer fault auxilary relay - 2 Nos Makes: EASUN REYROLLE or equivalent Breaker control switch-1No Makes: Switron or equivalent (i)Local/Remote switch-1No Makes: Switron or equivalent (j)Indicating lamps-1set Makes: Vaishnov or equivalent (k)Reputed brand Space heater & thermostat -2Nos Makes: Eltek or equivalent (l)MCB's of suitable current rating- - 3 Nos (m)Anti pumping relay -1No Makes: Reputed brand with ISI mark (n)Electrionic Audio alarm system with hooter -1No Makes : Reputed brand (o)Auxiliary plug & socket of 230VAC/10A - 1No Makes: Reputed brand with ISI mark (p)Panel illumination lamp 230V/40W -1No Makes: Reputed brand with ISI mark
2
748546
1497093
Uttampadmavathi LIS;Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/cm2, complete for finished item of work as directed by Engineer-In-Charge. Make HGURU/ FIEBIG
5
905
4528
Uttampadmavathi LIS;Supply of 11 KV/22 KV Hand gloves as directed by Engineer-In-Charge.
6
322
1936
Uttampadmavathi LIS;Supply of Grease as directed by Engineer-In-Charge.
50
329
16475
Uttampadmavathi LIS;Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class A insulation having 2mm thickness up to 3.3KV, complete for finished item of work as directed by Engineer-In-Charge.
7.2
5235
37695
Uttampadmavathi LIS;Supply of Diesel as directed by Engineer-In-Charge.
50
111
5555
Uttampadmavathi LIS;Supply of G.I Bolts / Nuts and Washers as directed by Engineer-In-Charge.
50
118
5910
Uttampadmavathi LIS;Supply of 16" (400mm) BLDC 30 W Wall mounted Fan with service value 2.7 CMM / Watt with all accessories etc., as directed by Engineer-In-Charge.Makes : Atomberg / Crompton / Orient / Havells / Halonix .
4
3409
13638
Uttampadmavathi LIS;Supply of 12" (300mm) Light duty exhaust fan with metal blades etc complete, as directed by Engineer-In-Charge.. Makes : Crompton / Havells Ventilair-DB /Orient hill air
8
1963
15706
Uttampadmavathi LIS;Supply and transportation of 24 W +/-10% (>= 2400 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5years warranty with BIS certification, for finished item of work as directed by Engineer-In-Charge. LUMINAIRE MAKE : Phillips / OSRAM / Wipro/ Crompton / Bajaj / Havells / Jaquar / IB LED /Panasonic / Halonix / HPL / Syska / Eveready /Surya / Keselec / FIEM / Arraystorm / GM /Goldmedal.LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs.
6
2017
12107
Uttampadmavathi LIS;Supply and transportation of 90 W +/-10% (>=9000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 )protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty, for finished item of work as directed by Engineer-In-Charge. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA./ Capart / Fortune Arrt / FIEM / Arraystorm / GM / Goldmedal / Panasonic / Silicon / Leksa / Orient / HPL LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. Complete for finished item of work. As directed by Engineer-In-Charge.
4
8658
34634
Uttampadmavathi LIS;Supply &Spreading of Coarse aggregate 40-20 mm (excluding Seigniorage charges), complete for finished item of work as directed by Engineer-In-Charge.
150
1188
178305
Uttampadmavathi LIS;Testing of Transformer oil for Dielectric breakdown strengthas directed by Engineer-In-Charge.
2
851
1702
Uttampadmavathi LIS;Testing of Insulation Resistance H.T. / LT copper / aluminium coils for Transformers. Complete for finished item of work. As directed by Engineer-In-Charge.
2
428
857
Uttampadmavathi LIS;Removing the existing transformer from the plinth/ Pole and refixing the standby transformer of following capacity including connections etc., complete up to 500/1000 KVA, for finished item of work as directed by Engineer-In-Charge.
2
9369
18740
Uttampadmavathi LIS;Replacing old and unserviceable gasket of top cover plate of transformer having following capacity 500/1000 KVA. as directed by Engineer-In-Charge.
2
1487
2974
Uttampadmavathi LIS;Replacing old and unserviceable gasket of bushing for the following Transformer capacity 500/1000 KVA H.T. as directed by Engineer-In-Charge.
2
786
1572
Uttampadmavathi LIS;Replacing old and unserviceable gasket of bushing for the following Transformer capacity 500/1000 KVA L.T. as directed by Engineer-In-Charge.
2
2038
4077
Uttampadmavathi LIS;Replacement the H.T. / L.T. burnt-out winding coils of distribution transformer including rewinding, varnishing and vacuuming etc., duly retaining the removed burnt winding coils by the Contractor / Firm for copper coils as directed by Engineer-In-Charge.
1080
880
950940
Uttampadmavathi LIS;Painting with 2 coats Zinchromate red oxide duly scraping existing paint followed by 2 coats of hammerton grey paint etc., complete.630 / 1000 KVA. as directed by Engineer-In-Charge.
2
5353
10707
Uttampadmavathi LIS;Replacing HT Bushings- for distribution Transformer by new one, for finished item of work as directed by Engineer-In-Charge.
6
472
2836
Uttampadmavathi LIS;Replacing HT Bushings metal parts- for distribution Transformer by new one, as directed by Engineer-In-Charge.
6
511
3068
Uttampadmavathi LIS;Replacing LT Bushings- for 500 / 1000 KVA distribution Transformer by new one as directed by Engineer-In-Charge.
6
236
1418
Uttampadmavathi LIS;Replacing LT Bushings metal parts- for 1000 KVA distribution Transformer by new oneas directed by Engineer-In-Charge.
6
2676
16061
Uttampadmavathi LIS;Drying the repaired transformer with appropriate heat / air --upto 500 / 1000KVA as directed by Engineer-In-Charge.
2
5629
11259
Uttampadmavathi LIS;Loading and Unloading of transformer from site to Workshop or vice versa upto 630 / 1000 KVA, as directed by Engineer-In-Charge.
2
9107
18215
Uttampadmavathi LIS;Transformer oil tested as per IS-335 - 1972 as directed by Engineer-In-Charge.
1960
160
313992
Uttampadmavathi LIS;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick masonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through flange with all accessories and labour charges complete finished item of work as directed by the Engineer-in-Charge., as per IS specifications 732/1982 (Part II)
12
10850
130202
Uttampadmavathi LIS;Supply & Fixing of Heat shrinkable sleeves for the Bus bars above 70 Sq.mm., as directed by Engineer-In-Charge.
80
34
2728
Uttampadmavathi LIS;Supply & Fixing of Copper Plate / Strip / SWG wire No.8 / 10 / 14, as directed by Engineer-In-Charge.
42
1186
49816
Uttampadmavathi LIS;Supply & Fixing of G.I. Strip / Plate / Wire, as directed by Engineer-In-Charge.
565.2
111
62907
Uttampadmavathi LIS;Supply and erecting approved make 11KV, 5KA metal oxide lightning arrestors suitable for 11KV supply with necessary materials on existing cross arm, as directed by Engineer-In-Charge.
6
2440
14643
Uttampadmavathi LIS;Supply and erecting porcelain Disc type insulator suitable for 11KV line with suitable hardware on existing cross arms, as directed by Engineer-In-Charge.
9
764
6881
Uttampadmavathi LIS;Supply and erecting porcelain Pin type insulator suitable for 11KV line with suitable hardware on existing cross arms, as directed by Engineer-In-Charge.
9
389
3507
Uttampadmavathi LIS;Supply and erecting porcelain Post type insulator suitable for 11KV line with suitable hardware on existing cross arms, as directed by Engineer-In-Charge.
9
864
7781
Uttampadmavathi LIS;Supply and erection of approved make 11 KV outdoor type gang operated Air Break switch of 400 A capacity with 3 post pin type insulator per phase, mounted in Horizantal / Vertical position with necessary channels on cross arms with adequate length of 'C' class GI pipe for operating handle provided with Lock & Key at suitable height from ground level with necessary clamps, complete for finished item of work as directed by Engineer-In-Charge.
2
11870
23741
Uttampadmavathi LIS;Providing and erecting heat shrinkable straight through joint for outdoor / indoor for H.T, XLPE Insulated armored cable 11000V grade complete with necessary accessories and suitable clamps for 120 to 185Sqmm cable including cost and conveyance of materials and all labour charges etc., complete with outer tubing tubular type, as directed by Engineer-In-Charge. Makes : Raychem / Transeal / M Seal.
7
38267
267875
Uttampadmavathi LIS;Supply of 300 Sq.mm 3.5 Core XLPE insulated, 1100V grade armored aluminum cable with ISI mark as per specification confirming to IS:7098 (Part - I), complete for finished item of work as directed by Engineer-In-Charge. Makes : Torrent / Unicab / Universal / Polycab /Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin / Ollvin / Finecab / RPG / V - Guard / Orbit / Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor/ Avocab / Pawancab/ Nakoda / Suncab.
300
2718
815640
Uttampadmavathi LIS;Supply of 400 Sq.mm 3.5 Core XLPE insulated, 1100V grade armored aluminum cable with ISI mark as per specification confirming to IS:7098 (Part - I), complete for finished item of work as directed by Engineer-In-Charge. Makes : Torrent / Unicab / Universal / Polycab /Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin / Ollvin / Finecab / RPG / V - Guard / Orbit / Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor/ Avocab / Pawancab/ Nakoda / Suncab. Complete for finished item of work. As directed by Engineer-In-Charge.
720
3411
2456568
Uttampadmavathi LIS;Supply and Fixing of 20mm dia 1.5mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles and decolam board for switches for Light, Fan and separate plug point including all labour charges etc., Complete for finished item of work as directed by Engineer-In-Charge.
400
86
34520
Uttampadmavathi LIS;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete for finished item of work as directed by Engineer-In-Charge.
12
134
1613
Uttampadmavathi LIS;Supply and fixing of 16A 3pin / 6A 3pin plug socket with indicator lamp and 16Amps fuse unit and 16 Amps switch control (5 in one) on decolam sheet covered board including earth connection and all labour charges etc., complete for finished item of work as directed by Engineer-In-Charge.
12
281
3378
Uttampadmavathi LIS;Supply and run of 2 of 22/0.3mm (1.50 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete for finished item of work as directed by Engineer-In-Charge.
400
66
26440
Uttampadmavathi LIS;Painting with Ready mixed oil paint (all colours) -Two Coats - Old Iron Work , comlete for finished item of work as directed by Engineer-In-Charge.
144.3
158
22843
Uttampadmavathi LIS;Fabrication,Supply and fixing of M.S.Pipes and specials including cost of M.S sheet , cutting, bending, welding, transportation, fixing in position, primary paint in red oxide, black paint in two coats etc..complete for finished item of work as directed by the Engineer in charge.
8988.3
154
1388692
Uttampadmavathi LIS;Distempering, 2 Coats with Water Bound Distemper- Supply and delivery of Distempering, 2 Coats with Water Bound Distemper to the Building including cost of all materials, labour charges, transpotation to anywhere in T.G, but exluding all taxes as directed by Engineer-in-Charge.
862.7
121
104818
Uttampadmavathi LIS;HOIST BRIDGES ,HOISTING EQUIPMENT AND CRANES,Etc, Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning,applying primary coat with two coats of Zinc chromite red oxide primer, followed by finishing coats 3 coats with synthetic enamel paint with material, labour,and all accessories with all leads and lifts where surface cleaning by sand blasting is not feasible and based on specific recommendations of designers, it is to adopt surface preperation done manually by hand and power tool after cleaning by chemical treatment to remove grease, rust, scaling etc., and to form phasphate coating to prevent further rusting, before applying primer painting, complete for finished item of work as directed by Engineer-In-Charge.
647.2
551
356996
Uttampadmavathi LIS;Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material, complete for finished item of work as directed by Engineer-In-Charge.
1301.2
123
160308
Uttampadmavathi LIS;Providing hearting/ casing embankment with homogeneous soil from approved borrow areas in layers of 25 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation, sorting out, transporting, spreading in layer of specified thickness, breaking clods, sectioning, watering, compacting each layer to density control of not less than 95 percent or as stipulated by Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with initial lead upto 1 km and all lifts, for finished item of work as directed by Engineer-In-Charge. (for formation of Approach road)
2300
293
674360
Uttampadmavathi LIS;Providing HBG Stone chips 2.36mm and below filling of approach road works (excluding Seigniorage charges) as directed by Engineer-In-Charge.
300
1441
432450
Uttampadmavathi LIS;Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than 15 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded aggregates for foundation filling including cost of all materials, machinery, labour, formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by Engineer-In-Charge.
113.4
5331
604581
Uttampadmavathi LIS;Providing and laying insitu vibrated M-20 ( 28days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20mm down size approved, clean, hard, graded aggregates for sub-structure / superstructure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by Engineer-In-Charge.
600
5749
3449400
Uttampadmavathi LIS;Providing and laying insitu vibrated M-20 ( 28days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20mm down size approved, clean, hard, graded aggregates for sub-structure / superstructure works including cost of all materials, machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by Engineer-In-Charge.(For Thrust blocks at leakage portion)
193.8
6823
1322414
Uttampadmavathi LIS;Providing, fabricating and placing in position reinforcement steel bars for RCC works including cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with 1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with initial lead upto 50 and all lifts, for finished item of work as directed by Engineer-In-Charge.
13170
84
1118133
Uttampadmavathi LIS;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Plain ended pipes conforming to B.I.S 458/2003, Ex-factory, Excluding transportation & taxes. R.C.C. PLAIN ENDED PIPES 600 mm Dia. NP3 Class, complete for finished item of work as directed by Engineer-In-Charge.
37.5
3462
129855
Uttampadmavathi LIS;Laying and jointing 600 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2 proportion by volume including cost of all materials ( excluding pipes and collars ), machinery, labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by Engineer-In-Charge.
10
797
7977
Uttampadmavathi LIS;Fabrication,Supply and fixing of Trash Rack, Shutter to Intake well & Entry Gate to Pump house including cost of M.S Angles, Flates, Channels, I Sections, cutting, bending, welding, transportation, fixing in position, primary paint in red oxide, black paint in two coats etc..complete for finished item of work as directed by the Engineer in charge.
1430
117
167310
Uttampadmavathi LIS;Manufacture, supply and delivery of MS pipes confirming to IS 3589/2001 of 1400mm Dia 10mm thick pipe including cost of all materials, machinery, labour and transportation any where in TG etc., complete as per specifications and approved drawings for finished item of work as directed by the Engineer in charge.
240
41461
9950712
Uttampadmavathi LIS;Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface for painting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts for finished item of work as directed by the Engineer in charge.
1056
602
635712
Uttampadmavathi LIS;Painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5 and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) cost of all materials, labour, scaffolding etc., complete with all leads and all lifts, for finished item of work as directed by the Engineer in charge.
1056
606
640147
Uttampadmavathi LIS;Providing 25 mm thick guniting to outer sides of Ms Pipe in cement mortar 1 : 3 proportion by weight including cost of all materials, machinery, labour and all other ancillary operations etc., complete with lead upto 1 km and all lifts, for finished item of work as directed by the Engineer in charge.
1071.1
648
694715
Uttampadmavathi LIS;Supply & fixing of Wire Mesh for guniting to the outer sides of MS pipe, as directed by the Engineer in charge.
1071.1
284
304192
Uttampadmavathi LIS;Cost of Laying, Jointing, Hydrostatic Filed Test Pressure, Including Cost of Site Welding, Jointing Materials And Cost of Transportation of Water Including Emptying Pipe Line After Completion Of Field Testing, for finished item of work as directed by the Engineer in charge. . (1400 mm Dia. 10 mm Thick)
240
3191
765936
Uttampadmavathi LIS;Providing & constructing Sand filling below foudation including cost of all materials, machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts, for finished item of work as directed by the Engineer in charge.
81.6
1624
132535
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements